Atlas Metal CADF-2 Specifications
MODULAR SERVING SYSTEMS
ALUMINUM - CA
ICE CREAM UNIT
Reach-In
Item No.
Quantity
CADF-2
CADF-3
DESCRIPTION:
The ice cream carts let you bring the profitability
of reach-in ice cream service to your serving line.
Ideal for ice cream or any frozen dessert, this unit
can be located anywhere in your serving line. It’s
fully self-contained -just plug it in and turn it on.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units together; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition. It’s the right cart for your serving line
needs.
FEATURES:
Fully insulated for maximum efficiency
and energy savings
CADF-2 SHOWN
Self-contained refrigeration system - just plug
it in and turn it on
Positive self-locking device - keeps tops level
and equipment in place
Fully mobile - each unit is provided with 5” dia.
swivel casters, two with brakes
Versatile - available in a wide range of sizes
and a wide variety of finishes and colors
NSF certified and UL recognized
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-31
ICE CREAM UNIT
Reach-In
MODEL “A” “CU. FT.”
CADF-2 36-1/4” 2.6 100 6.8 amps. - 120 V - 1/4 HP 230
CADF-3 50” 4.2 150 6.8 amps. - 120 V - 1/4 HP 265
30 1/2”
Plan View
CAPACITY
LBS.
A
ELECTRICAL
CHARACTERISTICS
35”
Rear Elevation
SHIP WT.
(lbs.)
8 1/2”
End View
SPECIFICATIONS:
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded,
ground and polished. Top is provided with an opening to receive the appropriate sized drop-in cold serving unit. An integral locking device shall be
provided to align and retain cart positioning when two or more carts are
joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with front panel of plastic laminate on
.050 aluminum. Owner to specify finish.
DEEP FREEZE COMPARTMENT: The cart is complete and includes a WDF
series drop-in deep freezer installed in the top. Constructed of 18 gauge,
type 304 stainless steel with raised perimeter bead and solid vinyl gasket.
The unit is fully insulated with 2-1/2” of high density polystyrene on all sides
and enclosed with a 22 gauge galvanized steel outer liner. The inner liner
has copper tubing firmly soldered to its exterior.
The unit is provided with a double pan, insulated lid with a rubber, selfinsulating hinge. The entire lid is removable.
REFRIGERATION SYSTEM:The compressor housing shall be fabricated from
formed angles and bolted to the base of the unit. A fully self-contained condensing unit is provided, with hermetically sealed compressor and a thermostat control. The system is fully charged with CFC free refrigerant and
ready to operate.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation with an on/off thermostat switch and pilot light. A 6’ long, 3-wire cord
and plug (NEMA 5-15P) will be provided.
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided
with grease fittings. Both casters on operator’s side have toe
activated brakes.
Specifications subject to change without notice.
ACCESSORIES:
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
S - Stainless steel front panel
EP - End panel,plastic laminate /stainless steel
RP - Removable rear panel
RPS - Rear sliding doors
Lid-locking device
5-year compressor warranty
Front skirt with recessed casters
End skirt
Rear skirt
Hinged Plexiglass lid
CA-32
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...