Atlas Metal CACS User Manual
MODULAR SERVING SYSTEMS
CASHIER UNIT
ALUMINUM - CA
Item No.
Quantity
CACS
DESCRIPTION:
Complete your serving line system with the
cashier station. It provides a large and convenient
location for your cash register and includes a locking cash drawer and foot rest.
The attractive streamlined design, plus the variety
of laminates give you a wide range of choices to
complement any decor. The unmatched feature of
the CA-Cart Line is the self-locking device which
eliminates loose fasteners or molding strips to
lock units together. Simply push the units together; the carts will automatically lock and the top
will be flush and level, regardless of the floor’s
condition. It’s the right cart for your serving line
CACS (Right Hand Drawer)
Shown with accessories,
Tray Slide, End Panels
needs.
FEATURES:
Large area for casg register
Locking cash drawer and foot rest
Fully mobile - each unit is provided with 5” dia.
swivel casters, two with brakes
NSF certified
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
CA-41
CASHIER UNIT
MODEL
CACS 235
30 1/2”
SHIP WT.
(lbs.)
24”
Plan View
Drawer
Foot Rail
35”
Rear Elevation
Drawer
Drawer
8 1/2”
End View
SPECIFICATIONS:
TOP: Solid top constructed of 16 gauge, type 304 stainless steel, die-formed,
welded, ground and polished. Top is provided with an opening to receive the
appropriate sized drop-in cold serving unit. An integral locking device shall
be provided to align and retain cart positioning when two or more carts are
joined.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4” x 1-1/4”. Frame sections are welded construction, ground and polished
to a uniform finish. Body is complete with front panel of plastic laminate on
.050 aluminum. Owner to specify finish. Additional section of 1-1/4” tubing is
provided to act as a foot rest.
CASH DRAWER: The unit is provided with a drawer, mounted under the
counter top on ball bearing roller guides - location as specified. Drawer
includes a keyed cylinder lock.
CASTERS: The casters shall be 5” diameter, non-marking rubber tired, swivel type with ball bearings, in both swivel and axle raceways, and provided
with grease fittings. Both casters on operator’s side have toe activated
brakes.
Specifications subject to change without notice.
ACCESSORIES:
SL - Tray Slide, 11-1/4” wide, stainless steel, 2-rail, fold down
SLT - Tray Slide, 11-1/4” wide, stainless steel, 3-rail, fold down
SLS - Tray Slide, 11-1/4” wide, stainless steel, solid, ribbed, fold down
SLF - Tray Slide, 11-1/4” wide, plastic laminate with S/S runners, fold down
CA-42
SH - Work Shelf, 8” wide, stainless steel, fold down
CB - Work Shelf, 8” wide, hardwood maple, fold down
CR - Work Shelf, 8” wide, Richlite, fold down
S - Stainless steel front panel
EPA - End panel,plastic laminate /stainless steel
RP - Removable rear panel
RPS - Rear sliding doors
US - Stainless steel undershelf, removable
Front skirt with recessed casters
End skirt
Rear skirt
Convenience outlet (specify voltage and amperage)
24” Extended front panel & tray slide
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...