Atlas Metal BMM-1000 Specifications
M O D U L A R S E R V I N G S Y S T E M S
MOBILE MILK UNIT
Reach-In Service
Quantity Item No.
BMM-1000
MODEL #BMM-1000
Shown with accessories
Tray Slide
DESCRIPTION
This convenient reach-in cooler stores case-packed milk or beverages.
A wide range of attractive plastic laminate colors is available, or urethane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete
reliability - use as an individual unit or joined in a continuous serving
line with our exclusive “Cam-Lock” system.
FEATURES
Attractive plastic laminate panels
All stainless steel interior
Fully insulated cabinet
Easy reach-in service
Economical cost
Cam-Lock system
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-21
MOBILE MILK UNIT
Reach-In Service
BMM-1000
MODEL CASES
BMM-1000 13”L x 13”W x 11”D 528 7.8 amps. - 120 V - 1/3 HP
32”
1/2 PT.
PEAK-TOP
Plan View
ELECTRICAL
CHARACTERISTICS
46”
TOP: Double wall constructed of 20 gauge, type
304 stainless steel, welded, ground and polished
to a uniform finish, with urethane foam-in-place
insulation. The top has a keyed lock and is
hinged to allow the front half to fold back.
DOOR: Double wall constructed of 20 gauge
stainless steel, welded, ground and polished to a
uniform finish, with urethane foam-in-place insulation. To facilitate easy access, recessed handles are provided which allow the door to slide
up and back on tracks.
BODY: 18 gauge plastic laminate covered panels
with 16 gauge stainless steel trim. Inner liner of
18 gauge stainless steel with urethane foaminplace insulation. Rear of unit has a removable
stainless louvered grill for access to refrigeration system.
Rear Elevation
SPECIFICATIONS:
REFRIGERATION: Al /3 HP self-contained condensing unit with hermetically sealed compressor, with factory pre-set temperature which is
field adjustable.
ELECTRICAL: The unit will be provided for 15
amp, 120 volt, 60 cycle, single phase operation,
with an illuminated On/Off switch located on the
operator’s side and a 6-foot long, 3-wire cord and
plug (NEMA 5-15P).
CASTERS: N.S.F. approved, 5” diameter, nonmarking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
49 1/2”
End View
ACCESSORIES:
Tray Slide, 12” wide, stainless steel, solid
ribbed, fold-down
Rear Fold-Down Door
Stainless Steel Legs with adjustable feet, in
lieu of casters
Urethane painted panels (see color chart)
Extended 5-year compressor warranty
BL-22
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...