Atlas Metal BLH-H-3, BLH-3-H Specifications
MO D UL A R SE RVI N G SY S TE M S
MOBILE HOT
SERVING UNIT
Electrically Heated with Heated Base
Optional Drain and Manifold
Quantity Item No.
BLH-3-H
BLH-4-H
BLH-5-H
MODEL #BLH-4-H
Shown with accessories
Tray Slide, Work Shelf, High Shelf
DESCRIPTION
This attractive, functional unit keeps hot foods hot - at their peak of
serving perfection. Your customers will see, taste and come back for
the difference.
A wide range of attractive plastic laminate colors is available, or urethane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete
reliability - use as an individual unit or joined in a continuous serving
line with our exclusive “Cam-Lock” system.
FEATURES
Attractive plastic laminate panels
Individually controlled thermostats
High wattage food wells, use wet or dry
Heated base storage for 12” x 20” pans
Economical cost
Cam-Lock system
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-5
MOBILE HOT SERVING UNIT
Electrically Heated with Heated Base
MODEL “A”
BLH-3-H 50” 3 8 3.40 KW -16.3 amps. 208 V 6-30P
BLH-4-H 63-3/4” 4 12 4.25 KW - 20.4 amps. 208 V 6-30P
BLH-5-H 77-1/2” 5 16 5.10 KW - 24.5 amps. 208 V 6-50P
OTE: Electrical characteristics subject to change when electrical accessories are added.
N
FOOD
WELLS
PAN SLIDE
RACK CAPACITY
30 1/2”
ELECTRICAL
CHARACTERISTICS
A
Plan View
NEMA
CONFIGURATION
35”
TOP: Constructed of 16 gauge, type 304 stainless
steel, die-formed, welded, ground and polished
to a uniform finish with rolled front edge.
BODY: Frame construction shall be of hi-tensile
square aluminum tubing, 1-1/4”, 1” and 3”extruded, vertical radius corners. Frame sections are all
welded construction, ground and polished to a
uniform finish. Body is complete with front panel,
end panels and 8-5/8” rear apron of 18 gauge
stainless steel. Owner to specify laminate finish.
Cam-lock locking system included with each unit
to align and retain cart positioning, when two or
more units are joined.
HOT SERVING UNIT: The cart is complete and
includes a hot serving unit installed in the top.
Constructed of 18 gauge, type 304 stainless steel.
Individual 12” x 20” hot food wells are provided,
fabricated of 18 gauge stainless steel, one piece
construction, all welded, ground and polished to
a uniform finish. All corners are coved with a minimum 1/4” radius. Each well is provided with an
850 watt heating element. The wells can be used
with or without water, however, the use of water
for a more efficient operation is recommended.
3”
Rear Elevation
SPECIFICATIONS:
HEATED BASE: Constructed of 20 gauge, type 304
stainless steel interior with coved corners and an
18 gauge stainless steel fascia. There is 1” of high
density fiberglass insulation provided. The interior is provided with a removable pan slide rack
assembly to accommodate 12” x 20” pans.
Doors are stainless steel, double wall constructed
and fully insulated: provided with edge mounted
chrome plated hinges, a slam action latch, a moisture proof gasket and a dial thermometer.
ELECTRICAL: The unit is provided with a
prewired single thermostat control for each well,
with a pilot light. A 6’ long, 3-wire cord and plug
is provided, extending from the control box located centered under the unit. Available for single
phase power only.
CASTERS: N.S.F approved, 5” diameter, nonmarking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
End View
ACCESSORIES:
Tray slide, 12” wide, stainless steel, solid
ribbed, fold-down
Work shelf, 8” wide, stainless steel, flat, fold-
down.
High shelf, stainless steel, with glass sneeze
guard
SAR Plexiglass End Sneeze Guards for High
Shelf (set of 2)
Canopy, stainless steel, with SAR Plexiglass
sneeze guard on customer’s side only
Food Warmer under High Shelf or Canopy*
Fluorescent Light under High Shelf or
Canopy*
Convenience Outlet (specify wattage, volt-
age & location)*
Stainless Steel Legs with adjustable feet, in
lieu of casters
Urethane painted panels (see color chart)
* Change in electrical required, contact factory.
BL-6
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...