Atlas Metal BLH-BU-3, BLH-2-BU Specifications
MO D UL A R SE RVI N G SY S TE M S
MOBILE HOT
SERVING UNIT
Enclosed - Four Sides
(Buffet Style)
Quantity Item No.
BLH-2-BU
BLH-3-BU
BLH-4-BU
BLH-5-BU
BLH-6-BU
MODEL #BLH-4-BU
Shown with accessories
Stainless Steel Canopy
DESCRIPTION
Add flexibility to your food serving layout with Atlas’ mobile, buffetstyle, hot serving unit. Accessibility from either side adds versatility
and speeds up service.
A stainless steel canopy with glass sneeze guards on both sides is
available as an accessory, along with fluorescent lighting providing full
display of contents.
The serving unit is enclosed on four (4) sides and includes a stainless
steel sliding rear door covered in matching plastic laminate.
A wide range of attractive plastic laminate colors is available, or urethane painted panels to blend with any decor.
Quality construction provides years of reliable service. Complete reliability - use as an individual unit or joined in a continuous serving line
with our exclusive CamLock” system.
FEATURES
Attractive plastic laminate panels
Individually controlled thermostats
High wattage food wells, use wet or dry
Economical cost
Cam-Lock system
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
BL-29
MOBILE HOT SERVING UNIT
Buffet Style
MODEL “A”
BLH-2-BU 36-1/4” 2 1.7 KW - 8.2 amps. - 120 V 6-15P
BLH-3-BU 50” 3 2.55 KW - 12.3 amps. - 208 V 6-20P
BLH-4-BU 63-3/4” 4 3.4 KW - 16.3 amps. - 208 V 6-30P
BLH-5-BU 77-1/2” 5 4.25 KW - 20.4 amps. - 208 V 6-30P
BLH-6-BU 91-1/4” 6 5.1 KW - 24.5 amps. - 208 V L6-50P
FOOD
WELLS
30 3/4”
ELECTRICAL
CHARACTERISTICS
Plan View
CONFIGURATION
A
NEMA
BLH-2-BU
BLH-3-BU
BLH-4-BU
BLH-5-BU
BLH-6-BU
35”
TOP: Constructed of 16 gauge, type 304 stainless
steel, with all corners Heliarc welded, ground
and polished to a uniform finish with rolled front
and rear edge.
BODY: Frame construction shall be of hi-tensile
square aluminum tubing, 1-1/4”, 1” and 3” extruded, vertical radius corners. Frame sections are all
welded construction, ground and polished to a
uniform finish. Body is complete with front panel,
end panels, a stainless steel sliding rear door
covered in plastic laminate, and 8-5/8” rear apron
of plastic laminate on .050 aluminum. Owner to
specify laminate finish. Cam-lock locking system
included with each unit to align and retain cart
positioning, when two or more units are joined.
HOT SERVING UNIT: The cart is complete and
includes a hot serving unit installed in the top.
Constructed of 18 gauge, type 304 stainless steel.
Individual 12” x 20” hot food wells are provided,
fabricated of 18 gauge stainless steel, one piece
construction, all welded, ground and polished to
a uniform finish. All corners are coved with a min-
Rear Elevation
SPECIFICATIONS:
imum 1/4” radius. Each well is provided with an
850 watt heating element. The wells can be used
with or without water, however, the use of water
is recommended for a more efficient operation.
ELECTRICAL: The unit is provided with a
prewired single thermostat control for each well,
with a pilot light. A 6’ long, 3-wire cord and plug
is provided, extending from the control box located under the unit, on operator’s left. Available for
single phase power only.
CASTERS: N.S.F approved, 5” diameter, nonmarking rubber tired, swivel plate caster with
grease fittings. Both casters on the operator’s
side have toe activated brakes.
Specifications subject to change without notice.
3”
End View
ACCESSORIES:
Tray Slide, 12” wide, stainless steel, solid
ribbed, fold-down (each side)
Canopy, stainless steel, with SAR plexiglass
sneeze guard on both sides and flourescent
lights (115V)*
Food Warmer under canopy
Urethane painted panels (see color chart)
* Change in electrical required, contact factory.
BL-30
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
Loading...