Atlas Metal BLC-2-RM-BU User Manual
Project: ___________
Item No.: ___________
Quantity: ___________
MODULAR UNITS BL SERIES
COLD FOOD
UNIT
Refrigerated Cold Pan
with 3” Recessed Top
Buffet Style
SPECIFICATIONS
TOP: Constructed of 16 gauge, type 304 stainless steel, die-formed, welded,
ground and polished to a uniform finish. The top includes a rolled front and
rear edge.
BODY: Frame construction shall be of hi-tensile aluminum square tubing, 11/4”, with 3-3/4” extruded, vertical radius corners on the front and rear. Frame
sections are all welded construction, ground and polished to a uniform finish.
Body is complete with front and end panels of .050 aluminum, and an 8-5/8”
rear apron of .090 aluminum, all covered with plastic laminate, with stainless
steel sliding rear doors covered in plastic laminate. Owner to specify laminate
selection. A cam-lock locking system is included with each unit to align and
retain cart positioning when two or more units are joined.
REFRIGERATED COLD PAN: The cart includes a refrigerated cold pan, with
3” recess, 9” deep overall, built into the top, constructed of 18 gauge, type
304 stainless steel. The pan is fully insulated with high density polystyrene, 1”
thick on all sides, 2” thick on the bottom, and enclosed with a 22 gauge galvanized steel outer case. The interior liner is fabricated with 1/4” radius coved
corners. The liner has copper tubing firmly soldered to the top 3” on all sides.
A 3/4” dia. drain with strainer, 4” PVC nipple and valve is provided. Separator
channels & inserts to hold 12” x 20” food pans are included.
REFRIGERATION SYSTEM: The compressor housing shall be fabricated
from formed 14 gauge galvanized and bolted to the base of the unit. A fully
self-contained condensing unit is provided with a hermetically sealed compressor and a digital electronic thermostat/thermometer. The system is fully
charged with CFC free refrigerant and ready to operate.
ELECTRICAL: The unit will be wired for 15 amps., 120 volt, single phase operation, with an on/off thermostat switch and pilot light. A 6’ long, 3-wire cord
and plug (NEMA-5-15P) will be provided.
CASTERS: N.S.F. approved, 5” diameter, non-marking rubber tired, swivel
plate casters with grease fittings. Both casters on operator’s side have toe
activated brakes.
Specifications subject to change without notice.
STANDARD FEATURES
Fully insulated for maximum efficiency and energy savings
Self contained refrigeration system - just plug it in and turn it on
Front and End Skirts with recessed casters
Cam-Lock locking device - keeps tops level and equipment in place
Fully mobile - each unit is provided with 5” dia. swivel casters, two with
brakes
Available in a wide range of plastic laminate panels, polyurethane enamel
& powder coated frames and panels to blend with any decor.
Total versatility - available in variety of lengths
Rear Sliding Doors, S/S, removable, w/ laminate
1-Year Parts & Labor Warranty
UL Listed
BLC-2-RM-BU
BLC-3-RM-BU
BLC-4-RM-BU
BLC-5-RM-BU
BLC-6-RM-BU
ACCESSORIES
TS - Tray Slide, 12” wide, S/S, solid, ribbed, fold-down
SL - Tray Slide, 11-1/4” wide, S/S, 2-rail, fold-down
SLT - Tray Slide, 11-1/4” wide, S/S, 3-rail, fold-down
SLF - Tray Slide, 11-1/4” wide, plastic laminate w/ S/S
runners, fold-down
SH - Work Shelf, 8” wide, S/S, flat, fold-down
CB - Work Shelf, 8” wide, hardwood maple, fold-down
CR - Work Shelf, 8” wide, Richlite, fold-down
ES - End Shelf, 18” wide, S/S, fold-down
CBE - End Shelf, 16” wide, hardwood maple, fold-down
REVERSA PANEL - Front
REVERSA PANEL - Ends (set)
BLSF - S/S Front Panel
BLSE - S/S End Panel (each)
PP - Painted Panels, polyurethane enamel, in lieu of laminate
USB - Bottom Shelf, S/S, removable
HD - Hinged Doors, S/S, w/ plastic laminate
DL - Door Locks (set)
Sneeze Guards - various styles available (see sneeze
guard section of catalog)
CO - Convenience Outlet (specify base or apron mount)
CO-DUP - Convenience Outlet, Duplex receptacle
JBC - Outlet Box in base, 4x4 (120V) with cord
ERS - Electrical Raceway System
PCS - 7 to 10 ft. Power Cord
CW - Cord Wrap
P-CAST - Polyurethane Casters, 2-W/Brakes
SL-BL - Legs with adjustable feet, in lieu of casters
REM-COMP - Remote Compressor on base of unit w/ louvered S/S
compartment and remote on/off switch in apron
5YW - 5-Year Compressor Warranty
WFB - Stainless Steel Perforated false bottom
Adapter Plates & Adpater Bars (pgs. DI-51 - DI-52)
CP - Cover Plate with handles, S/S
2060-1 - Condensate Evaporator
RS - Remote On/Off Switch
RDVE - Rear Drain Valve Extension
*220 Volt-50 Cycle Compressor
*Units with these accessories are not currently UL listed.
BL-19
30-3/4”
A
35”
PLAN VIEW
REAR ELEVATION
MODEL “A”
REFRIGERATED PAN
DIMENSIONS
35”
3”
END VIEW
ELECTRICAL
CHARACTERISTICS
SHIP WT.
(lbs.)
BLC-2-RM-BU
BLC-3-RM-BU
BLC-4-RM-BU
BLC-5-RM-BU
BLC-6-RM-BU
Atlas Metal Industries 1135 NW 159th Dr. Miami, FL 33169 (800) 762-7565 Fax: (305) 623-0475 atlasfoodserv.com
BL-20
36-1/4”
(92cm)
50”
(127cm)
63-3/4”
(161.9cm)
77-1/2”
(196.8cm)
91-1/4”
(231.7cm)
25-5/8” X 19-7/8” X 9”
(65 X 50.4 X 22.8cm)
39-3/8” X 19-7/8” X 9”
(99.9 X 50.4 X 22.8cm)
53-1/8” X 19-7/8” X 9”
(134.9 X 50.4 X 22.8cm)
66-7/8” X 19-7/8” X 9”
(169.8 X 50.4 X 22.8cm)
80-5/8” X 19-7/8” X 9”
(204.7 X 50.4 X 22.8cm)
6.0 amps. - 120V 1/4 HP
6.0 amps. - 120V 1/4 HP
7.8 amps. - 120V 1/3 HP
10.7 amps. - 120V 1/2 HP
10.7 amps. - 120V 1/2 HP
285
(129.3kg)
335
(152kg)
395
(179.2kg)
445
(201.8kg)
575
(260.8kg)
8/13-sc
Loading...