Atlas Metal BLC Parts Manual

Subsidiary of Mercury Aircraft, Inc.

1135 N.W. 159th DR., MIAMI, FL 33169

PHONE [phone], FAX [phone], E-mail: [e-mail]

PARTS LIST FOR ICE COLD PANS

WIC/ WICD / WICL/ AND WICDL SERIES

1

2

7

3

4

5

WIC-4 SHOWN

ITEM NUMBER PART NUMBER DESCRIPTION

1 S80103-0 Separator Channel (WIC, WICD)
1 S85008-0 Separator Channel (WICL, WICDL)
2 86-3202 Perforated Snap in Drain
3 49-1028 Grommet
4 30-3130 3/4 X 4 PVC Nipple
5 3016-2 Stop Valve
6 7020-0 Nylon Spacer
7 7002-0+Model # Vinyl Bead Gasket

6

ICE COLD PANS

WIC/ WICD / WICL/ AND WICDL SERIES

---------------------------------------------------------------------------------------------------------------------------------------------------------------

INSTALLATION

Provide the correct counter cut-out opening (see chart below) and drop in. The vinyl gasket assures complete
seating. A non-toxic silicone seal may be used between the gasket and counter top (not required).
Note: Units are supplied with a nipple and stop valve to be connected for draining.

------------------------------------------------------------------------------------------------------------------------------------------------------------

The unit is ready to operate and should be level for draining purposes.

------------------------------------------------------------------------------------------------------------------------------------------------------------

MODEL NUMBER CUT-OUT OPENING

WIC & WICD-1 22 1/4 X 14 1/4

WIC & WICD-2 22 1/4 X 28

WIC & WICD-3 22 1/4 X 41 3/4

WIC & WICD-4 22 1/4 X 55 1/2

WIC & WICD-5 22 1/4 X 69 1/4

WIC & WICD-6 22 1/4 X 83

WICL & WICDL-2 14 1/4 X 44 1/4

WICL & WICDL-3 14 1/4 X 66

WICL & WICDL-4 14 1/4 X 87 3/4

OPERATION

MAINTENANCE

NEVER CLEAN PANS WITH A CHLORIDE BASED PRODUCT. CHLORIDES OR IMPROPER
CLEANING COULD SCAR, MARK AND/OR CORRODE PANS. DO NOT
ABRASIVE PRODUCTS. TO CLEAN USE SOAPY WARM WATER, RINSE THOROUGHLY TO
REMOVE ALL RESIDUES. FAILURE TO MEET THESE CONDITIONS WILL VOID WARRANTY.

USE STEEL WOOL OR