Atlas Metal BCDFT-L, BCDFT User Manual
DESIGNER SERIES SNEEZE GUARDS
Item No.
BUFFET CANOPY DUAL
BCDFT - Series (Flip Top)
BCD - Stainless Steel Canopy with Sneeze Guards
BCDFT
Stainless steel buffet canopy
with sneeze guard
BCDFT-L
Stainless steel buffet canopy
with sneeze guard & fluorescent light
BCDFT-H
Stainless steel buffet canopy
with sneeze guard and food warmer
BCDFT-HL
Stainless steel buffet canopy
with sneeze guard and food warmer
w/ incandescent light
Quantity
MODEL
SIZE
BCDFT 30” 450 570
BCDFT 40” 675 855
BCDFT 54” 925 1165
BCD FT 68” 1275 1635
BCDFT 85” 1500 1860
Note: Special voltages are available. Contact factory.
* Fluorescent light fixtures will add approximately 1 amp. to power load.
LENGTH
(inches)
BCH
(watts @ 120 V)
(watts @ 120 V)
ACCESSORIES:
Plastic Laminate Trim (PLT)
End Guards (EGB)
BCHL
20”
SPECIFICATIONS:
Canopy is constructed of 18 gauge stainless steel,
welded, ground and polished to a uniform finish to
accept the 1/4” thick scratch resistant plexiglass,
sneeze guards.
(BCDFTL - unit only) provided with fluorescent light
fixture for 120/60/1 operation prewired with shatterproof safety shield and on/off switch.
(BCDFTH - unit only) provided with food warmer
mounted under canopy top for 208/60/1 prewired
operation.
(BCDFTHL - unit only) provided with food warmer
and incandescent lamps 120/208/60/1
Specifications subject to change without notice.
A
Rear Elevation
10 5/8”
14”
End View
a subsidiary of Mercury Aircraft
1135 NW 159 Dr., Miami, Florida 33169
Tel: (305) 625-2451 or (800) 762-7565 • Fax: (305) 623-0475
10/08-SC
CW-51A
Loading...