AtlasIED TSD-MIX31RL Users Guide

Download

Page 1

Owner’s Manual

TSD-MIX31RL

3x1 Mic/Line Mixer

TSD-MIX31RL

3x1 Mic/Line Mixer

with Priority Mute & Remote Level

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 1 –

Specifications are subject to change without notice.

Page 2

TSD-MIX31RL

3x1 Mic/Line Mixer

Owner’s Manual

Description

The versatile AtlasIED TSD-MIX31RL 3x1 mic/line mixer is ideal for applications where paging, public

address, and BGM music are required. Use alone or in conjunction with ampliers in meeting rooms,

stadiums, gymnasiums, and other applications requiring versatile, multi source mix control.

The unit includes two mic/balanced line inputs via removable Phoenix style connectors and a stereo summing dual RCA input. Switchable phantom power is provided for both mic inputs to facilitate condenser microphones. The high quality, low noise internal mic preamps ensure clarity and quiet

operation without unwanted coloration. A 12dB/octave high pass lter @ 125Hz also is available on each input to minimize bass rumble and low frequency feedback.

Priority paging can be accomplished via contact closure or VOX trigger on Input 1 (mutes input 3 only). Remote level control feature allows use of the AtlasIED AAVC-10K (or equivalent) decorative wall plate control for convenient remote adjustment of either the entire mix bus or input 3 only (typical BGM input). A variable output limiter provides system protection by reducing clipping and distortion - which is especially useful when mixing multiple mics and/or line sources with varying volumes.

The TSD-MIX31RL is part of a full line of AtlasIED Time Saving Devices. These compact

(1.5" x 4" x 2.75") units are designed to solve some of the common audio system problems in the easiest and in the most efcient and cost-effective way. All models are made from high quality components and include removable individual I/O connectors for quick and precise wiring, separate

ground terminals for all I/Os assuring secured connections, and removable level controls that can be

replaced with tamper-proof security covers. The TSDs are highly efcient and meet Energy Star™ standards as one 24V DC power supply (available separately) can power multiple Time Saving Devices.

Features

• Two (2) Balanced Mic/Line Inputs

• High Gain (50dB) Microphone Preamps

• Switchable 24V Phantom Power

• One (1) Unbalanced Summing Line Input

• Vox Sense and Contact Closure Priority Mute of Ch3

• Variable Output Limiter

• Remote Level Control

• 12dB/Octave Low Cut Filter @ 125Hz

• Input Signal & Peak Indicator LEDs

• High Gain Output for Driving Long

Balanced Lines

• Separate Ground Connections

• Removable Phoenix Style I/O Connectors

• Security Covers

• Cable Management System

• Multiple Mounting Congurations

• Meets Energy Star™ Standards

• Compact Chassis Design

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Audio Applications

• Mixer

• Mic Preamp

• Line Preamp

• Stereo Summing Preamp

• Line Drive

• Remote Level Control

• Priority Paging

Installation

• Churches

• Restaurants

• Sports Bars

• Schools

• Industrial Facilities

• House of Worship

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 2 –

Specifications are subject to change without notice.

Page 3

Owner’s Manual

TSD-MIX31RL

3x1 Mic/Line Mixer

Front Panel Description

1 2

1. Inputs Level Controls 1 and 2 - Independently adjust the gain of the input 1 and 2 input signals.

Turn clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knobs can be removed and replaced with a supplied security cover to prevent unauthorized adjustment.

2. Input Level Conrol 3 - Adjusts the gain of the input level of the input 3 stereo RCA inputs. Turn

clockwise to increase the signal level and counter-clockwise to decrease it. Note: The Input Level Control knobs can be removed and replaced with a supplied security cover to prevent unauthorized adjustment.

3. Power LED - Illuminates Blue when 24VDC is present.

4. Input Peak LED - Illuminates Red when the input signal reaches 3dBV below when signal clipping will occur. Occasional ashing is normal but if this indicator is continuously On, then reduce the

input level using the input level control on the front panel.

5. Signal LED - Illuminates Green when the input signal strength reaches 25mV to verify a signal path. Note: The LED will not illuminate if the input level is turned Off.

6. Limiter LED - Adjustment of the Limiter feature should be done after the input gain(s) have been

properly set. Each Input should be adjusted so the Input Peak LED ashes on signal peaks and then the Output Limiter control can be set so this LED ashes to indicate that the limiter circuit is

active.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 3 –

Specifications are subject to change without notice.

Page 4

TSD-MIX31RL

3x1 Mic/Line Mixer

Rear Panel Description

Owner’s Manual

9 9

1 8

TSD Input/Output connections are removable for easy system wiring. The connector has a 3.5mm

pitch between pins.

1. DC Power Input - Each TSD that requires DC power comes with a 2 position connector for

an external 24VDC power supply (sold separately). Because of the low power consumption, a

single external power supply may power more than one TSD. Refer to the current requirements in milliamps to match with the appropriate power supply. Note: It is acceptable to exceed the current of the TSDs but NOT safe to use a power supply that is below the current requirement of the device.

2. Balanced Inputs 1 and 2 - Connects to balanced line or mic level sources. For gain or source input

type selection, refer to the “Dip Switch Function Identication” chart. Note: Unbalanced line inputs can be inserted with proper wire conguration by connecting the (G) and (-) terminals together.

3. Unbalanced Input 3 - Electronically sums unbalanced audio signals through stereo RCA connectors. Level control is on the front panel . Input 3 can be muted via contact closure or an audio signal on Input 1 for priority paging applications.

4. Input 3 Remote Mute - Connect a dry contact closure across these two terminals to mute Input 3 when the switch is closed. Dip Switch 7 must be in the On position.

5. Remote Level - For remote gain control, connect the AtlasIED AAVC-10K (or equal) wall plate to

this terminals. Set Dip Switch 8 to control a mixed signal or Input 3 signal only.

6. Balanced Line Output - Provides output for connection to balanced mic/ line level devices. Note:

Unbalanced line level devices can be used with proper wire conguration by connecting the (G)

and (-) terminals together.

7. Output Limiter Control - Sets peak output levels by increasing or decreasing the sensitivity. The Limiter LED on the front panel indicates when limiter is in use. Note: The control knob can be replaced with a supplied security cover to prevent unauthorized adjustment.

8. Vox Sense - Adjusts the sensitivity of the Mute circuit for priority pages. Set Dip Switch 8 to control a mixed signal or Input 3 signal only.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 4 –

Specifications are subject to change without notice.

Page 5

Owner’s Manual

9. Cable Management Retainer Points - Each TSD includes two cable retainer straps for securing the included cable management retainers. Remove one of the rear panel screws, align the

panel hole with a retainer and rmly tighten the screws.

TSD-MIX31RL

3x1 Mic/Line Mixer

Dip Switch Function Identication

Switch Position

• DIP SW # 1,2 - 24VDC Phantom Power applies power for condenser mic operation to

corresponding input terminal. Down position is On.

• DIP SW # 3 - Input Mic or Line Select for input gain selection for Input 1. Up position is Line,

down position is Microphone.

• DIP SW # 4 - Low Cut Filter engages at 125Hz with a roll off rate of 12dB per octave. This lter

operates either in the Line or Mic mode and is available on Input 1. Ideal for vocal microphones to reduce low frequency energy and to increase intelligibility. Down position is On.

• DIP SW # 5 - Input Mic or Line Select for input gain selection for Input 2. Up position is Line,

down position is Microphone.

• DIP SW # 6 - Low Cut Filter engages at 125Hz with a roll off rate of 12dB per octave. This lter

operates either in the Line or Mic mode and is available on Input 2. Ideal for vocal microphones to reduce low frequency energy and to increase intelligibility. Down position is On.

• DIP SW # 7 - Input 3 Mute Receive will mute audio present at Input 3 when audio is present at

Input 1. Down position is On.

• DIP SW # 8 - Remote Level sets whether the remote volume control adjusts all inputs mixed or

Input 3 only. Up position is all inputs, down position is Input 3 only.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 5 –

Specifications are subject to change without notice.

Page 6

TSD-MIX31RL

3x1 Mic/Line Mixer

Owner’s Manual

Cable Management

Knob and Security Cover

All front panel level controls feature a removable knob that can be replaced with an included security

cover. Follow these steps to prevent potentiometer damage or unwanted changes.

1. Knob Installation - Turn the potentiometer shaft fully counter-clockwise. Align the knob indicator to the lowest setting on the panel and the potentiometer shaft slot. Carefully press the knob onto

the potentiometer shaft. Do not force or damage may occur to the potentiometer.

2. Security Cover Installation - Remove the knob from the panel and insert the cover. Small pliers may be required to remove the knobs. Align the security cover to the level control panel hole. Push the

cover into the hole until it snaps into place. Do not force or damage may occur to the potentiometer.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 6 –

Specifications are subject to change without notice.

Page 7

Owner’s Manual

TSD-MIX31RL

3x1 Mic/Line Mixer

Mounting

Listed below are the ways to mount the TSD and the optional accessories that can be purchased.

1. Velcro™ - Each unit includes two 2" x 2" pieces of industrial-grade Velcro™ with adhesive backing to adhere to any at surface. Clean all surfaces before applying the adhesive side of the Velcro™.

2. Multi Mount Plate - Each TSD includes a versatile multi-position mounting plate. This plate

allows the TSD to be mounted to any surface; but is ideal for use with rear rack rails or side rack hat channels. Use the included M3 x 4mm screws to install the plate on the TSD. Note: Only use the included M3 x 4mm screws as other screws may be too long and will cause internal damage

to the TSD. The multi-position mounting plate is a new addition being included with TSDs. If the TSD being used did not include the mounting plate, contact AtlasIED customer service at

1-800-876-3333.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 7 –

Specifications are subject to change without notice.

(M3 x 4mm)

Page 8

TSD-MIX31RL

3x1 Mic/Line Mixer

Owner’s Manual

Optional Mounting Accessories

1. TSD-RMK 19" Width Rack Mount Kit - For 19" rack mounting, AtlasIED offers an optional rack mount kit, the TSD-RMK. This rack mount kit can support up to four TSD units. The kit includes three blank panels designed to ll any unused slots. Use the included hardware to mount the TSD into the rack mount kit using the top mount screw holes on the TSD.

2. TSD-RMKHR Half Width Rack Mount Kit - AtlasIED offers an optional rack mount kit that can be used in half width rack applications including the AtlasIED WMA-HR and AWR-HR models. The TSD-RMKHR can support up to two TSDs. Included is an extra blank panel to ll one of the

spaces if only one TSD is being used.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 8 –

Specifications are subject to change without notice.

Page 9

Owner’s Manual

3. TSD-RRMK Rear Rack Mounting Kit - For complete exibility in mounting a TSD or TSD external power supplies the optional TSD-RRMK is available. The TSD-RRMK can support mounting of

either two larger TSDs with external power supplies or up to 4 TSD models. Note: Only use the included M3 x 4mm screws as other screws may be too long and will cause internal damage to

the TSD.

TSD-MIX31RL

3x1 Mic/Line Mixer

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 9 –

Specifications are subject to change without notice.

Page 10

Block Diagram

TSD-MIX31RL

3x1 Mic/Line Mixer

INPUT 1

PHANTOM

OFF

INPUT 2

OFF

1 2 3 4 5 6 7 8

DIP SWITCH FUNCTION SET

INPUT 1

INPUT 2

MIC

LOW CUT

LINE

OFF

MIC

Owner’s Manual

INPUT 3

MUTE RCV

OFF

REMOTE

LEVEL

INPUT 3

MIXED

INPUT 2

MIC

LOW CUT

LINE

OFF

MIC

LIMITER

LEVEL

SIGNAL LED PEAK LED

24V

POWER SHOW LED

DC 24V

LIMITER

–

OUTPUT

REMOTE LEVEL INPUT 3/MIXED

MUTE

INPUT 1

INPUT 2

RCA INPUT

INPUT 3

VOX MUTE SENS

MIC/LINE

+ –

MIC/LINE

+ –

INPUT 3 LEVEL

INPUT 2 LEVEL

MUTE

INPUT 1 LEVEL

LOW CUT

125Hz 12dB

LOW CUT

125Hz 12dB

REMOTE LEVEL

Specications

Description 3 x 1 Mic/Line Mixer

Chassis Color Black Chassis Material Aluminum

Inputs Type Qty 1, Unbalanced Connection RCA Left and Right Actively Summed Impedance 10KΩ Input Level 316mV (-10dBV) = 2V (+6dBV) Balanced Output,

Maximum Input 1.6V (4.1dBV)

Type Qty 2, Balanced Mic or Line Selectable Connection Removable 3 Position Captive Screw 3.5mm Spacing Impedance 1.2KΩ Balanced, 600Ω Unbalanced

Phantom 24VDC Defeatable Low Cut Filter 125Hz/12dB Defeatable

Line Input Level 1V (0dBV) Balanced = 2V (+6dBV) Balanced Output, Maximum Input 6V (6dBV)

Mic Input Level 46dB Gain, 10mV (-40dB) Balanced = 2V (+6dBV) Balanced Output, Maximum Input 40mV (-27dBV)

Outputs Type Qty 1, Balanced Line Connection Removable 3 Position Captive Screw 3.5mm Spacing Impedance 300Ω Balanced, 150Ω Unbalanced

Line Output Level 1V (0dBV) In = 2V (+6dBV), Maximum Output 6V (15dBV)

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 10 –

Specifications are subject to change without notice.

Page 11

Owner’s Manual

Controls Input Level Control Qty 3, Removable Knobs with Security Covers Output Level Control Qty 1, Removable Knob with Security Cover Mute Input 3 Contact Closure, Removable 2 Position Captive Screw

3.5mm Spacing VOX Mute Sens Trim Adjust for Mic Sensitivity Output Limiter Threshold Adjust Remote Level Control Port 10K External Pot, Removable 2 Position Captive Screw

3.5mm Spacing Dip Switch Function • Phantom Power 24VDC, Input 1 & 2

• Input 1 & 2, Mic/Line Select

• Input 1 & 2, 125Hz/12dB High Pass Filter

• Input 3, Mute Receive

• Remote Level Assign, Mix or Input 3

Indicators

Input Signal Green, 25mV On Threshold Input Peak Red, -3dB Before Clip

Limiter Red, Limiter Activation Power Blue

Electrical

Frequency Response 20Hz - 20kHz (±1dB) THD .06% & 1kHz Signal to Noise Line to Line: 85dBV Mic to Line: 78dBV Output Limiter Threshold Adjust 50mV Mimimum Output to No Limit

Power Requirements

Voltage 24VDC Power Consumption 60mA

Power Consumption 1.4W

Dimensions H 1.5" (39mm) x W 4" (101mm) x D 2.75" (70mm)

Weight 6oz, .165kg

Included Accessories Velcro™ Industrial-Grade Multi-Mount Plate Qty 1, Includes Two (2) M3 x 4mm Screws Cable Retainers Qty 2 Level Control Knobs Qty 3 Level Control Security Covers Qty 3

Optional Accessories

TSD 24VDC Power Supply TSD-RMK 1 RU 19" Width Rack Mount Panel (Supports 4 TSD Units) TSD-RMKHR 1 RU Half Rack Width Panel (Supports 2 TSD Units) TSD-RRMK Rear Rack Mounting Kit

Safety and Certifications

External Power Supply cUL, CE, RoHS, TUV

TSD-MIX31RL

3x1 Mic/Line Mixer

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

AtlasIED.com – 11 –

Specifications are subject to change without notice.

Page 12

TSD-MIX31RL

3x1 Mic/Line Mixer

Owner’s Manual

Limited Warranty

All products manufactured by AtlasIED are warranted to the original dealer/installer, industrial or

commercial purchaser to be free from defects in material and workmanship and to be in compliance

with our published specifications, if any. This warranty shall extend from the date of purchase for a period of three years on all AtlasIED products, including SOUNDOLIER brand, and ATLAS SOUND

brand products except as follows: one year on electronics and control systems; one year on

replacement parts; and one year on Musician Series stands and related accessories. Additionally, fuses and lamps carry no warranty. AtlasIED will solely at its discretion, replace at no charge or repair free of charge defective parts or products when the product has been applied and used in

accordance with our published operation and installation instructions. We will not be responsible

for defects caused by improper storage, misuse (including failure to provide reasonable and necessary maintenance), accident, abnormal atmospheres, water immersion, lightning discharge, or malfunctions when products have been modified or operated in excess of rated power, altered,

serviced or installed in other than a workman like manner. The original sales invoice should be

retained as evidence of purchase under the terms of this warranty. All warranty returns must comply

with our returns policy set forth below. When products returned to AtlasIED do not qualify for repair

or replacement under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair

costs before any nonwarranty work is performed. In the event of replacement or upon completion of

repairs, return shipment will be made with the transportation charges collect.

EXCEPT TO THE EXTENT THAT APPLICABLE LAW PREVENTS THE LIMITATION OF CONSEQUENTIAL DAMAGES FOR PERSONAL INJURY, ATLASIED SHALL NOT BE LIABLE IN TORT OR CONTRACT FOR ANY DIRECT, CONSEQUENTIAL OR INCIDENTAL LOSS OR DAMAGE ARISING OUT OF THE INSTALLATION, USE OR INABILITY TO USE THE PRODUCTS. THE ABOVE WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE.

AtlasIED does not assume, or does it authorize any other person to assume or extend on its behalf,

any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.

Service

Should your Atlas TSD require service, please contact the AtlasIED

warranty department at 1-877-689-8055, ext. 277 to obtain an RA number.

AtlasIED Tech Support can be reached at 1-800-876-3333 or support.atlasied.com.

Visit our website at www.AtlasIED.com to see other Atlas products.

All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS003941 RevD 4/17

AtlasIED.com – 12 –

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800.876.3333 • Fax: 800.765.3435

Specifications are subject to change without notice.