Atlas IED FA42T-6MB Installation Guide

FA42T-6MB

Strategy II 4" "Motor Board" Assembly

1. Install Enclosure Per Instructions Provided. Extend Service Loop at Least 6" Beyond Bottom Lip of Enclosure

2. Terminate Service Loop to Red & Black Leads on Motorboard

3. Install Motorboard Into Enclosure with Screws Provided

4. Select Wattage Tap Via Front Selector Switch

5. Install Original FA Series Grille

FA42T-6MB

Frequency Response: 70Hz - 20kHz

Sensitivity: 88dB (1W/1M)

1/1

Power Limit Signal

Grill Options

FA51-6 Round

FA170-6 Round

FA720-6 Round

FA730-6 Square

Input 1Input 2Input 3

Level Level Level

©2012 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. All specs are subject to change without notice. ATS004351 RevA 5/12

1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.

TELEPHONE: [phone]
FAX [phone]

AtlasSound.com