Atlas IED ECM-30 User Manual

Download

Page 1

ECM-30

Electical Control Module

ECM-30

Features

ECM-30

• Single 30A Outlet

• Manual/Auto On/Off Switch

• Incoming AC Present LED

• Active and AC Fault LEDs

• Clamping Spike & Surge Suppression EVS Circuitry

General Description

The Atlas Power ECM-30 is an Electrical Control Module (ECM) 30A Power Conditioner and AC Spike Suppressor that is designed to be used as a stand-alone unit or in conjunction with an ECS-6RM Controller up to 1000ft away. The ECM-30 features electrical supression circuitry that can suppress up to 6kV or 3000A voltage spikes. Additionally the unit features Extreme Voltage Shutdown (EVS) when used in conjunction with an ECS-6RM controller. This enables the unit to be shut off during High or Low AC line conditions in order to protect electronics plugged into the unit. Unit must be used in conjunction with either the ECM-RACEWY1, EMC-RACEWY3, or ECM-RACEWY6 mechanical, rack mountable housing.

Speciﬁcations

ECM-30

Current Rating 30 Amps

Operating Voltage 102-132VAC

Minimum Spike Clamping Voltage 460 VRMS @ 3000A

Maximum Spike Clamping Voltage 6,000V

Power Consumption .5 Watts

Power Requirements 120V 60Hz

Height 3.0" (76.2mm)

Length 8.5" (215.9mm)

Depth 3.5" (88.9mm)

Weight 1.25 lbs. (.68 kg)

Certiﬁcations MET (UL 1449)

Architect and Engineer Speciﬁcations

Sequencing power module shall be Atlas Sound model ECM-30. Sequencing power module shall have 1, 30A outlet. Sequencing power module shall include AC surge and spike protection technology. Sequencing power module shall have a manual bypass switch and LEDs indicating Incoming AC, Active, and AC Fault. Units shall be designed to work with Atlas Power raceway units: ECM-RACEWY6, ECM-RACEWY3, or ECM-RACEWY1 for connecting to AC Mains power. Finish shall be textured black epoxy and dimensions shall be 8.5"W x

3.5"D x 3"H (215.9mm x 88.9mm x 76.2mm).

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 FAX (800) 765-3435

AtlasSound.com

1/1