Atlas IED E408-100 User Manual

E408-100

Precision, Plate Mounted 100W Attenuator

Features

• 1.5 dB Steps for Sound Masking and Other Precision Applications

• 100 Watt Power Handling

• Rack or Plate Mounting

General Description

Specially designed for attenuation in masking and sound reinforcement
systems where fine tuning of level control is required. Employs a
ten-position, non-shorting rotary switch without stop. Attenuation rate is

1.5dB per step. (All other specifications are the same as the AT Series
including the UL listing.)

Specifications

Height 4

Width 2

Depth 2

Shipping Weight 1.00 lb (0.45 kgs)

Plate Size 1-gang

Plate Type Stainless Steel

Power Rating 100 Watts

Total Attenuation 15dB

UL Listed/Standard 813, 2043

1

⁄2" (114.3mm)

3

⁄4" (69.9mm)

5

⁄8" (66.7mm)

E408-100

Architect and Engineer Specifications

Plate mounted wall attenuator shall be Atlas Sound model E408-100.
Attenuator shall be capable of handling up to 100W of RMS power.
Attenuator shall have a ten position, non shorting rotary switch design
without stops. Total attenuation shall be 15dB with each position
adjustment being 1.5dB. Unit shall be both UL813 and UL2043 rated.
Attenuator shall be able to be rack mounted or wall mounted with
included stainless steel, single gang wall plate. Dimensions shall be
23⁄4"W x 25⁄8"D x 41⁄2"H (69.9mm x 66.7mm x 114.3mm).

©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004186 RevA 9/11

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

1/1