Atlas IED DR42, DR32, DR-72, DR-54 User Manual

DR Series
Projector Horns For Uniform Sound Dispersions
DR-54
•  Multi-Purpose Reflex Sound Horns for High Intelligibility Sound      Distribution and Voice and Signal Applications
•   Accepts All Standard High Efficiency Compression Drivers with  
3
8" - 18 Male Threads
    1
•   Exponentially-Flared for Uniform Sound Distribution
•   Weatherproof, All-Metal Construction for Year Round Use
Applications
DR Series double re-entrant horns have proven their capability and  ruggedness in permanent and temporary applications in rec rea tional,  commercial and industrial applications for over sixty years. When  used  with PD or SD Series  compression drivers,  they assure    intelligible audio trans mis sion  over long dis tances or through high  back ground noise levels and are con sis tently rec om mended for sport  fa cili ties,  amuse ment parks,  church towers, ware houses, fac to ries,  mili tary sites, trans por ta tion ter mi nals, and other en vi ron men tally­demanding lo ca tions.
Genenal Description
Atlas Sound DR Series double re-en trant horns are designed for use  with  compression driver units to offer superior  music and voice    com mu ni ca tions over dis tance and ambient noise. The circular   projectors are equipped with  a reso nance damp ing ring  for best  response through an ex tended frequency range.  Weather-resistant  units will accommodate Atlas Sound PD & SD Series compression  drivers or any driver with stan dard 13⁄8" -18 male thread  cou pling.  The integral "U-type" steel mounting bracket provides maximum  directional aiming flexibility and en hanc es  installation capability  when used outdoors or in industrial environments. The rugged all­metal, ex po nen tially-flared horns are finished in durable grey epoxy.  Loudspeaker stands feature tele scop ing action, positive-locking  hardware and diecast safety collar and offer vertical ex ten sion range  from 5 to 8 feet (1524 to 2438mm) height.
Specifications
DR-32
Dispersion                95°
Low End Cut-Off       190Hz
Air Column Length     21⁄2' (762mm)
Sound Level*     *
Directivity Factor (Q)**       10.7
Weight             11lbs. (4.9kg.)
DR-42
Dispersion                85°
Low End Cut-Off       140Hz
Air Column Length     31⁄2' (1067mm)
Sound Level*     *
Directivity Factor (Q)**       14.7
Weight             13lbs. (5.9kg.)
DR-54
Dispersion                75°
Low End Cut-Off       115Hz
Air Column Length     41⁄2' (1372mm)
Sound Level*     *
Directivity Factor (Q)**       16.8
Weight             20lbs. (9.0kg.)
DR-72
Dispersion                65°
Low End Cut-Off       85Hz
Air Column Length     61⁄2' (1981mm)
Sound Level*     *
Directivity Factor (Q)**       19.3
Weight             25lbs. (11.3kg.)
* Determined by associate compression driver (see chart on reverse side of this sheet). ** One octave band of pink noise at 1 kHz.
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004071 RevB 6/11
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasSound.com
1/3
Sound Pressure Levels of DR Series Models with Atlas Sound Compression Drivers
DR-32 SPL
Model PD-30T                124dB
Model PD-5VH/PD-5VT   124dB
Model PD-60/PD-60T      130dB
SD-70      129dB
Model PD75T      131dB
DR-42 SPL
Model PD-30T                125dB
Model PD-5VH/PD-5VT   125dB
Model PD-60/PD-60T      131dB
SD-70      130dB
Model PD75T      132dB
DR-54 SPL
Model PD-30T                125dB
Model PD-5VH/PD-5VT   127dB
Model PD-60/PD-60T      132dB
SD-70      132dB
Model PD75T      133dB
Architect and Engineer Speci fi ca tions
The reflex sound projector shall be Atlas Sound Model ____________  (Model DR-32, DR-42,  DR-54 or DR-72) or ap proved equal.  The  weatherproof exponential-flared unit shall have a rated low frequency  cut-off of ___________ and sound dispersion of _____________.  Air column length shall  be ___________.  It shall accommodate  compression driver units with standard 13⁄8" -18 male threads. The  horn, less driver shall  measure  __________ and weigh __________.  "U-type" steel mounting bracket shall be provided (for mounting).  Finish shall be grey epoxy.
DR-72 SPL
Model PD-30T                127dB
Model PD-5VH/PD-5VT   129dB
Model PD-60/PD-60T      135dB
SD-70      134dB
Model PD75T      136dB
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS004071 RevB 6/11
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A. TELEPHONE: (800) 876-3333 FAX (800) 765-3435
AtlasSound.com
2/3
Loading...
+ 1 hidden pages