AA35G/AA60G
PRELIMINARY
PRELIMINARY
3-Input, 35-Watt Mixer Amplifier with Global Power Supply
1/6
Features
• AA35G - Three inputs (each with a front panel volume control) and a
single output channel
• AA60G - Four inputs (each with a front panel volume control) and a
single output channel
• Ideal For Paging, Background Music, and Music-On-Hold Applications
• Balanced Mic/Line Input, Zone 2, And Dual Rca Stereo Music Inputs
• Priority Muting by VOX Or External Switch
• Bass And Treble Controls On Master Output
• Secondary Zone 2 Output 1 W & 600Ω / MOH
• Universal AC Power Supply For Use 110V - 240V Systems
• 70V, 100V, or 8Ω Amplifier Output
• Signal Presence LED Indicators
Applications
The AtlasIED AA35G/AA60G is the perfect choice for distributed business
paging and background music (BGM) systems, small to medium speech
privacy systems, and in applications where music on hold (MOH) plus
paging is required.
General Description
The AA35G/AA60G is a three/four input channel mixer amplifier designed
for distributed business paging and background music (BGM) systems,
small to medium speech privacy systems, and in applications where
music on hold (MOH) plus paging is required.
With one microphone input and two stereo line inputs, the AA35G/
AA60G will accommodate a variety of input sources including paging
microphones, CD players, and digital music receivers. A dip switch
selectable matrix allows the creation of a Zone 2 mix from any or all of
the input sources for music or messaging on hold applications. 70.7V,
100V, and 8Ω outputs are provided.
The output power of 35-watts will match nicely with FAP, SM, SD, and
GD series loudspeakers. In fact, in an 11' ceiling application, the AA35G
will provide power for up to 117 SD72W loudspeakers tapped at .25watts each while providing upwards of 84dB in the direct sound field at
ear height.
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS005743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
System AA35G AA60G
PRELIMINARY
PRELIMINARY
Type 35-Watt Mixer Amplifier 60-Watt Mixer Amplifier
Power Supply Type Global Switch Mode Global Switch Mode
Amp Topology Class AB Class AB
Number of Fixed Inputs 3 4
Accessory Inputs N/A N/A
DSP Internal N/A N/A
Network N/A N/A
Optional Accessory Card Slot N/A N/A
Output Power (Note 1)
100 V 35-Watts 60-Watts
70V 35-Watts 60-Watts
8Ω 35-Watts 60-Watts
Front Panel
Power Switch Push Type Push Type
Indicators Output Signal, Clip, Power Signal, Clip, Power
Indicators Input Signal Signal
Output Limiter N/A N/A
PHD Test Circuit N/A N/A
Level Controls Master, Inputs 1-3 Master, Inputs 1-4
EQ Output Bass Yes Ye s
EQ Output Treble Ye s Yes
Mic/Line/Aux Inputs
Input Quantity 3 4
Mic/Line (Balanced, 3 Position PHX Type. 33mm Pitch) 1 1
Aux RCA (Unbalanced RCA L & R Sum) 2 3
Aux 3.5mm (Unbalanced 3.5mm L & R Sum) N/A N/A
Speciality Inputs
Line Input Balacnced
(Balanced Phoenix 3 position, 3.5mm Pitch)
Line Input Unbalacnced (RCA) N/A N/A
Room Combine - Bridge Buss In/ Out (Line Level
Balanced Phoenix 5 position, 3.5mm Pitch)
Amp IN
(Balanced Phoenix 3 position, 3.5mm Pitch)
Input Mute
VOX (Input 1 Activated)
(Assignable Inputs , VOX Threshold Senstivity
Priority / Remote Mute: (Assignable Inputs,
Contact Clouser (2 Position Phoenix)
Remote Level
Type (External Varible Resistance 10k Ohm - 0 Ohm) N/A N/A
Connector (2 Position Phoenix 3.5mm Pitch) N/A N/A
Asignment (Input 6 or Master, Dip Switch Selection) N/A N/A
N/A N/A
N/A N/A
N/A N/A
Fixed Assignment Fixed Assignment
Fixed Assignment Fixed Assignment
2/6
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0 05743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Outputs
PRELIMINARY
PRELIMINARY
Main (Class 2 Wire Rated)
Transformer Coupled Taps
Main Output Termination
(Barrier Strip Screw Terminal)
Zone 2 1 W 8 Ohm with Level Control (2 Position
PHX 5.08mm Pitch)
Zone 2 Balanced / MOH with Level Control
(600Ω, Max 1.0V Out, 2 Position PHX 5.08mm Pitch)
Pre Out
(Balanced, 2V Max, Pre Master Level Control)
Control Switch Functions
Zone 2 (Assignable) Ye s Ye s
Mute Receive (Assignable) Ye s Ye s
Phantom Power (24V) Ye s Ye s
Mic/Line Select (Inputs 1, 2, 3, 4) Input 1 Input 1
Remote Level Assignment (Input 6 or Master Level) N/A N/A
Lo Cut Filter (400Hz Hi-Pass Filter, By-passes Bass EQ) N/A N/A
Technical Data
Frequency Response (LF +/- 3db, HF +/- 1dB) Ye s Ye s
THD+N (0.5% or Less, at 1kHz, Rated Output) Ye s Ye s
Input Impedance (Mic & Line Balanced 1200Ω,
Unbalanced 10kΩ)
Mic Mode
Line Mode
3.5mm L & R Unbalanced Summed
RCA Unbalanced L & R Summed
Signal To Noise Ratio
Balanced Line
3.5mm L & R Unbalanced Summed
RCA Unbalanced L & R Summed
Phantom Power (Mic Mode) 24V 24V
EQ
Output Bass
Output Treble
Power Requirements
AC Mains Operating Range (100V - 240v 50 / 60 Hz) Ye s Ye s
AC Cord (IEC to NEMA 5-20P , 2M, 18-Gauge,) Ye s Ye s
Idle Power (Amps, Watts, BTU) 0.18A, 11W, 37 BTU 0.27A, 16W, 54 BTU
Average Power - Note 3 (Amps, Watts, BTU) 0.75A, 54W, 184 BTU 1.09A, 81W, 276 BTU
Max Power - Note 1 (Amps, Watts, BTU) 1.15A, 90W, 307 BTU 1.67A, 131W, 446 BTU
Cooling
APD Standby, Active Idle Convection Cooled Convection Cooled
In Use Convection Cooled Convection Cooled
Cooling Air Flow Direction N/A
8Ω, 70.7V, 100V 8Ω, 70.7V, 100V
Ye s Ye s
Ye s Ye s
Ye s Ye s
Ye s Ye s
3mV
800mV
NA
400mV
Mic
55dB
55dB
75dB
75dB
±6dB @ 100Hz
±6dB @ 10kHz
DSP
NA
3mV
800mV
NA
400mV
55dB
55dB
75dB
75dB
±6dB @ 100Hz
±6dB @ 10kHz
NA
3/6
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0 05743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
4/6
PRELIMINARY
PRELIMINARY
Mechanical
Chassis
Finish Ye s Ye s
Unit Height
Unit Width 8.25" (210mm)
Unit Depth 12.25" (311mm)
With with Rack Kit (Optional) Ye s Yes
Unit Weight 8.2 lbs (3.7 kg) 9.7 lbs (4.3 kg)
Agency Approvals AC Power Requirements
RoHS Compliant Ye s Ye s
Safety Listings Yes Ye s
CB Ye s Ye s
FCC N/A N/A
Dimensions and Weight
Rack Mount Requirements AAGRMK2 Rack Mount Kit (2RU) AAGRMK2 Rack Mount Kit (2RU)
Dimensions - Unit 15.5" W x 6.75" H x 10.75" D (393mm x 171mm x 273mm) 15.5" W x 6.75" H x 10.75" D (393mm x 171mm x 273mm)
Dimensions - Shipping
Weight - Unit 11 lbs (4.9kg) 12 lbs (5.6 kg)
Weight - Shipping
Ye s
Ye s
3.5" (90mm) 3.5 (90mm)
8.25" (210mm)
12.25" (311mm)
NOTES:
1. Power level measurment is define as follows: 1Hz Sine wave signal 1 second at 1% THD+N
2. If the amplifier specifies 8 ohm load, a 4 ohm load can be applied but will deliver the the power rating of 8 ohm. If driven past this power rating the amplifier will go into
protect.
3. Average Power is defined as Pink Noise input signal applied to achieve 1/3 of the 4 Ohm or 70.7V power rating.
4. Max Power is defined as 1 KHz input signal applied to achieve the maxium power output before clipping into a 4 Ohm or 70.7V load.
5. BTU is calcualed by the AC Mains Power consumed minus the total power output measured at the specified load and condition, multiplied by 3.412.
Example: 785 Watts from the AC Source - 600 Watts Total Output power = 185 x 3.412 = 631 BTU
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0 05743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Dimensional Drawings
SIDE
12.25
3.85
PRELIMINARY
PRELIMINARY
3.50
5
3
2
1 9
0 10
5/6
8.25
AA35G
Professional Mixer Amplifier
64
7
3
8
2
1 9
0 10
64
64
3
7
7
2
8
8
1 9
0 10
3
21
5
5
SPI Clip
5
3
2
1 9
0 10
Master
Bass
64
Power
7
8
– +– +
Treble
FRONT
11.625
3.85
1601 Jack McKay Blvd. • Ennis, TX 75119
800.876.3333 • AtlasIED.com
WARNING: SHOCK HAZARD - DO NOT OPEN
AVIS: RISQUE DE CHOC ELÉCTRIQUE - NE PAS OUVRIR
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK
DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE
AVIS: NE PAS EXPOSER CE MATÉRIEL À LA PLUIE OU L’HUMIDITE
AFIN DE REDUIRE LE RISQUE D’INFLAMMATION OU DE CHOC ELÉCTRIQUE
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference.
(2) This device must accept any interference received,
including interference that may cause undesired operation.
8.25
12.25
SIDE
CONFORMS TO
UL STD. 60065
CERTIFIED TO
CSA STD. C22.2
No. 60065
119301
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0 05743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Architect and Engineer Specications
PRELIMINARY
PRELIMINARY
6/6
The mixer/amplifier shall control and mix up to three input signals
and deliver an audio output of 35-watts into 8Ω, 70.7V, and 100V
or 60-watts into 8Ω, 70.7V, and 100V. The amplifier output shall be
transformer isolated with a frequency response 50Hz – 20kHz (-1dB)
with less than 0.5% THD at rated output. The output regulation shall
be less than 2dB, no load to full load. It shall be capable of operation
from a 110V to 240VAC, 50/60Hz line. The mixer/amplifier shall be
convection cooled. The amplifier shall have thermal and short circuit
protection.
The mixer/amplifier shall have a switch selectable MIC/TEL balanced
input to accept either low impedance microphone or Tel/Line Level
signals with -60 dBV sensitivity. The MIC/TEL input shall include a
Phoenix (Euro Block) type connector. The MIC/TEL input impedance
shall be 600Ω. The MIC/TEL input shall include an auto mute (VOX
Mute) sensitivity control for Input 1. The MUTE SENSE control will
allow threshold adjustment of mute activation. The mixer/amplifier shall
include two stereo summing (AA35G) and three (AA60G) auxiliary inputs,
unbalanced, -10dBv, with dual-RCA jacks. The auxiliary input impedance
shall each be 10kΩ. The mixer/amplifier shall include a Zone 2 output,
a 1-watt at 8Ω output, and transformer isolated 600Ω output with a
maximum level of 1.5VRMS. The mixer/amplifier Zone 2 output shall be
assignable from any of the 3 inputs via the rear panel dipswitch. The
Zone 2 output shall have one rear panel mounted rotary level control for
both outputs. The mixer/amplifier shall incorporate rear panel terminals
via Phoenix connector for the REMOTE MUTE function, controlled by an
external switch closure. A rear panel dipswitch shall allow assignment
of Input 2 and/or Input 3 to respond to the mute function activation. The
Mute assignment shall not affect the Zone 2 output.
The front panel shall include Inputs 1, 2, 3 (AA35G) and 4 (AA60G level
controls. Input Signal, Output Signal, Clip and Power LEDs shall also be
incorporated. The mixer/amplifier front panel shall also include bass and
treble tone controls (100Hz and 10kHz, ±10dB). The tone controls shall
not affect the Zone 2 output. The mixer/amplifier front panel shall include
an AC Mains power switch.
A rear panel AC receptacle (un-switched) shall be included for connection
of external equipment.
Dimensions (W x H x D) shall be 8.25" x 3.85" x 12.25" (210mm x 98mm
x 311mm) with feet and knobs or 3.5" (90mm) H without feet. Net
weight shall be 8.2lbs. (3.7kg). Front panel finish and material shall be
black ABS resin and case finish (and material) shall be black powder
coated sheet steel.
©2018 Atlas Sound LP. The Atlas “Circle A”, Soundolier, and Atlas Sound are trademarks of Atlas Sound L.P. IED is a Registered Trademark of Innovative Electronic Designs LLC. All rights reserved.
All other Trademarks are property of their respective owners. No endorsement is implied. Due to continual product development, specifications are subject to change without notice. ATS0 05743 RevA 2/18
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasIED.com
Loading...