Atlas IED A8S Datasheet

A8S IP Extension Speaker

Pre-Assembled 8" Loudspeaker & Baffle for use with IP Speakers

Features

• Provides Additional Speaker Coverage for Larger Rooms When
Connected to an IP Speaker

• Highly Efficient 10oz Dual Cone Loudspeaker System Provides 94dB
Average SPL @ 1W/1M

• Wide Frequency Response of 86Hz – 8kHz (±5dB) is Perfect for Speech
and General Messaging Playback

Applications

Convenient, cost effective solution to extend the coverage area of an
IP Speaker.

C10A Series Speaker

General Description

Quality components are factory wired and shipped complete with
dual-cone loudspeaker and square grille. The A8S incorporates 8"
model C10A with a 10-ounce ceramic magnet to handle 25 Watts of
power. Recessed grille is square with attractive white epoxy finish.
To meet code requirements and facilitate in stal la tion in a wide variety
of ceilings, Atlas Sound offers an optional selection of recessed
and surface mounting enclosures, mounting rings and tile bridge
accessories.

161-8

Specifications

Model A8S

Baffle 161-8

Speaker Size 8"

Speaker Model C10A

Power Rating 25 Watts

Frequency Response 45Hz - 19kHz

Sensitivity 97dB

Power Taps 8Ω

Weight 3.2 lbs

Recommended Enclosures FEST-IH, SEA-I8S, or SEST-I8S
Use with 180-2 for drop ceiling
application

Reccomended Tile Bridge I8S-TB (Not for use with Enclosure)

Architect and Engineer Specifications

The loudspeaker, baffle assembly shall be Atlas Sound A8S or approved
equal. The loudspeaker shall be an 8" (203mm) dual-cone type with a power
rating of 25 Watts and a frequency response of 45Hz - 19kHz. Loudspeaker
shall be equipped with an installed recessed grille.

©2013 Atlas Sound L.P. All rights reserved. Atlas Sound is a trademark of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS001746 RevD 9/13

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

1/1