Atlas IED 607-15 Data Sheet

Specifications subject to change without notice

© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL10-1226

401

TEN

1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: [phone] / FAX [phone]

WALL MOUNT

ENCLOSURE

600-12

FEATURES

• 16 Gauge CRS all welded construction with 11guage CRS
tapped mounting rails

• Locking front door

• Vents on each side

• 10-32 pan head screws for panel mounting

• Completely assembled

• Convenient Pre-Punched Back Panel for Wall Mounting

GENERAL DESCRIPTION

Atlas Sound Model 600-12 is a surface mounting wall cabinet used for
housing small electronic system installations including 19" wide ampli­fiers, tuners and associated communication controls for schools,
churches, clubs and recreation facilities. The 600-12 has a vertical
panel opening of 12

3

⁄8" (314mm) and is constructed of 16 gauge CRS.
Louvers on each side of the cabinet are provided for ventilation. The
11 gauge CRS panel mounting rails are recessed

5

⁄8

" (16mm) for a
“flush” look. Locking front door is standard. Panel-mounting screws
(10-32 x

3

⁄4") are provided for equipment panel and accessory mount-

ing. Mounting rails are tapped 10-32 on EIA spacing.Three double

1

⁄2"
(13mm) and 3⁄4" (19mm) knockouts are provided on the top and bottom
of the cabinet for wire entry. Four keyhole slots for wall hanging are
provided on the back panel. The 600-12 is shipped completely assem­bled and is finished in (#962) black epoxy powder coat.

UL Listed version is available.

ARCHITECT & ENGINEER SPECIFICATIONS

The wall mounted cabinet shall be Atlas Sound __________ (Model
600-12) or approved equal. It shall be constructed of 16 gauge CRS
with 11 gauge CRS mounting rails. The cabinet shall have a locking
front door. Internal louvers shall be provided for ventilation. Three dou­ble

1

⁄2" (13mm) and 3⁄4" (19mm) knockouts shall be provided on the top
and bottom of the cabinet to facilitate wiring. Four keyhole slots shall
be provided on the back panel to accommodate wall hanging. The
cabinet shall accommodate standard 19" (483mm) rack panels and
have a vertical panel opening of 12

3

⁄8

" (314mm). The cabinet shall be

provided with twelve 10-32 x 3⁄4

" (19mm) panel mounting screws and
the mounting rail shall be tapped 10-32 on EIA spacing. Enclosure
shall be shipped completely assembled.

MODEL WIDTH HEIGHT DEPTH PANEL SPACE WEIGHT

600-12 22

5

⁄16"15

1

⁄2"15

3

⁄8"12

3

⁄8" 45 lbs.

(567mm) (394mm) (391mm) (314mm) (20.41 kg)

22

5

⁄

16

"

15

3

⁄

8

"

22

1

⁄

4

"

153⁄8"

19

5

⁄

16

"

P.S.

123⁄8

"P .S.

151⁄2

"