Atlas IED 535-25, 535-25-MPRD, 540-25, 540-25-MPRD, 544-25 User Manual

500 Series Racks

19" Wide Opening Stand-Alone/Gangable Floor Cabinet with Adjustable Rails, UL Listed

Applications

The Atlas 500 Series Cabinets are ideal for single and multi-bay

applications where easy accessibility to wiring in and between racks

is desirable. These cabinets are commonly used to house Data Center

Equipment, Communications equipment, Audio Video equipment,

Computer equipment, Broadcast equipment, Security systems, CCTV

equipment, IT equipment, Industrial systems and Building Management

Systems.

Features

• UL 1678 Listed

• Three Model Heights

• Rear Door Offers Right or Left-Hand Hinging Capability

• Up to 6RU (or combinations to 6RU) Panel Opening in Top Offers
Wiring Convenience or Fan Panel Cooling with Optional EFT/EFP
Series Fan Kits

• Slotted Mounting Rail Supports Vertical Wire Management and are
E.I.A. -Spaced for Vertical Mounting of 19” Accessories

• Increased Opening base Facilitates Wiring to Conduit or to Access
Below Floor Raceways

• Functional 3RU Blank Panel (51⁄4") Provided

• Manufactured to E.I.A. Standards

• Includes Perforated Front, Rear and Side Vents for Heat Dissipation

• Pre-drilled to Accept M-1A Cabinet Mount IR Repeater

Basic Rack Includes

• Base, Top Panel, Frame and Rear Door, Fully Assembled

• Welded 16-gauge Cold Rolled Steel (CRS) Construction

• Includes Front “Fully Adjustable” Rack Rails made from 12-Gauge
CRS with Hash Marks to Denote RU Increments

• Rack Rails Utilize “Drop-In” Feature for Mounting in Cabinet

• Removable Left/Right Rear Door with Lock

• 18 Conduit Knockouts

Options

• Solid, Perforated, or Plexiglas Front Door

• RR Series Rack Rails

• SPS Series Side Panels

• 4" Wide Wiring Channel Consolidates Wiring

• Drawers, Shelves, Fans, and Accessories

• RCK-25 or RCK-30 Caster Kits

©2012 Atlas Sound LP. All rights reserved. Atlas Sound is a trademark of Atlas Sound LP. ATS002847 RevD 5/12

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

1/4

General Description

Architect & Engineer Specications

The 500 Series Cabinets are welded frames in 251⁄2" or 30" depths

available in three different RU heights, 35RU, 40RU, and 44RU. The 500

Series Cabinets are welded 16-gauge CRS and assembled for immediate

use.

Rear doors are hung with quick-release spring hinges which allow them

to be rotated 180⁄ for right- or left-hand opening. See chart on following

page for optional front door model numbers. If front door is ordered, it

will be keyed differently than the rear door for security. Cabinet frame and

rear door are vented to promote air circulation and heat dissipation.

The 500 Series line offers several installer-friendly advantages including a

6RU standard panel width opening in the cabinet top and conduit arrays.

The top opening can be left open for free wire access/ventilation, partially

covered or closed using 2 standard 51⁄4" (3RU) panels. Top opening is

also perfect for installing EFP Series fan. Multiple conduit arrays provide

maximum access, and are conveniently located on the top and bottom

panel surface, and across the top and bottom back flanges of the cabinet

frame. Surface arrays are comprised of 4 knockouts: two 1" (25 mm)

standard knockouts and two 1⁄2" (13mm) / 3⁄4" (19mm) concentric. Flange

arrays consist of five knockouts: three 1" (25mm) standard and two 1⁄2"

(13mm) / 3⁄4" (19mm) concentric.

Cabinet frame and rear door are vented to promote air circulation and

heat dissipation.

Includes one pair of 12-gauge CRS adjustable mounting rails tapped

10–32 (544-30 includes 2 pair 12-gauge mounting rails) Cabinets have

welded top and bottom panels with panel-opening vent; removable rear

door with quick-release spring hinges, flush pull and cylinder lock.

Cabinets feature front-to-rear mounting rail supports with slotted cutouts

to easily adjust rail depth and to provide open raceways for vertical cable

pathway.

(Note: Number of supports per side vary depending upon model selected

— 40RU & 44RU models = 4 per side; 35RU model = 3 per side)

Cabinet surface is phosphate pre-treated for proper paint adhesion.

Standard finish is textured black epoxy.

Floor cabinet shall be Atlas Sound Model _____ (500 Series). Unit shall

be UL Listed 1678 constructed of 16-gauge CRS throughout. It shall have

1

⁄2" (13mm) and 3⁄4" (19mm) concentric conduit knockouts and 1" standard

knockouts on the top and bottom panels, and top and bottom rear

flanges. Unit shall be vented for natural air convection. Rear door shall

be supported by spring hinges and be positioned for (right or left-hand)

hinging. Door shall be equipped with a flush door pull and cylinder lock.

Enclosure shall have one pair of fixed rails made of 12-gauge Cold Roll

Steel (CRS) with 10–32 tapped holes on E.I.A. universal spacing.

Overall height dimension shall be ____________; panel space dimension

shall be ___________, _______ units. Unit shall have 86.42 in2 of open

ventilation. Optional RCK-25 and RCK-30 available.

If ordering front door, add: Unit shall be used in conjunction with Atlas

Racks solid front door Model SFD-______, perforated steel Model

MPFD-______ or Plexiglas door Model PFD-______. Front doors shall be

hung on quick-release hinges for (right, left)-hand hinging and include a

flush door pull and cylinder lock keyed differently than the rear door.

Specication Friendly Text

1. Stand Alone/Gangable Floor Cabinet – Stand Alone/Gangable Floor

cabinet shall be a metal cabinet with adjustable rack rails used to

secure rack mount equipment. Cabinet shall be capable of being

mounted to the floor. Cabinet shall:

a. Be (35RU, 40RU or 44RU) High opening for equipment mounting.

b. Be ( 251⁄2" or 30") deep with 19" wide E.I.A. Adjustable front

12-gauge rack rails for mounting equipment.

c. Includes rear locking door with left or right hand hinging.

d. Provide perforated top, rear door and bottom flanges on cabinet

for heat dissipation.

e. Be 16-gauge welded metal Cold Roll Steel (CRS) frame.

f. Include Optional Solid, Plexiglas or Perforated Front locking door

capable of right or left hand mounting.

g. Include wire isolation/conduit holes located top and bottom of

cabinet.

h. Manufacturer Atlas (535-25, 540-25, 544-25 and 544-30) with

Optional (SFD, MPFD or PFD) Series Front Door and Optional SPS

Series side panels.

©2012 Atlas Sound LP. All rights reserved. Atlas Sound is a trademark of Atlas Sound LP. ATS002847 RevD 5/12

1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: [phone]
FAX [phone]

AtlasSound.com

2/4