Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL3-1466
181
THREE
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
ROUND RECESSED BAFFLES
FOR MOUNTING 4" AND 8" LOUDSPEAKERS
(T)51 Series
FEATURES
• Economical Industry-Standard Design
• Sturdy One-Piece CRS Construction Eliminates Vibration and Rattle
• Torsion Spring Versions Provide Quick and Efficient Installation
• Popular Design Mounts to a Wide Selection of Enclosures or Mounting Rings
APPLICATIONS
Atlas Sound 51 Series flush-mounting baffles are designed for general purpose,
recessed loudspeaker installations. Economical, series is offered in 4" and 8"
sizes for standard or torsion spring installation wherever a recessed loudspeaker
is specified including office buildings, retail spaces, and commercial real estate
of all kinds.
GENERAL DESCRIPTION
51 Series. These industry favorites are aesthetically pleasing and economical
steel baffles available in standard screw-mount or labor-saving torsion spring (T)
versions. Torsion spring versions provide fast "spring-into-position" mounting to
specified enclosures and reduce or eliminate visible hardware. All models are
of one-piece 24-gauge CRS construction and finished in textured white epoxy.
51-8 / T51-8. Utility baffles provide for professional and cost-efficient installation
of 8" (203mm) loudspeakers. Loudspeaker mounts to the baffle using standard
hardware. The baffle speaker assembly screw mounts (51-8) or torsion mounts
(T51-8) to specified enclosures.
51-4 / T51-4 / T51-84. Versatile baffle series provides installation flexibility for 4"
loudspeakers. All models include loudspeaker mounting studs for efficient on-site
assembly. Model 51-4 mounts using standard hardware to specified enclosures.
Models T51-4 and T51-84 mount specified enclosures using torsion spring
assemblies for a completely hardware-free appearance. Torsion assemblies are
adjustable to accommodate ceiling thickness up to 2".
Note: For proper support, torsion spring grilles should not be used with loudspeaker assemblies exceeding 5 lbs.
51-8
T51-8
51-4 T51-4
T51-84
Specifications subject to change without notice
© 2001 Atlas Sound LP Printed in U.S.A. 000501 SL3-1466
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A. / TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
GRILLES MOUNTING 4" (102mm) LOUDSPEAKERS
DIMENSIONS MOUNTS OPTIONAL
MODEL DIAMETER (A) PROJECTS (B) (C)* (D)*** ENCLOSURE (OR MTG. RING TILE BRIDGE WEIGHT
T51-4 7
3
⁄8"
1
⁄4"4
11
16" 55⁄8" (EZ)96-4 Series, 76-4 81-4 .3 lb. (.15 kg)
(187mm) (6mm) (119mm) (143mm) (EZ)96-4X Series
T51-4*
E410(-11), E410-NK, EZE410
PR411 — .3 lb. (.15 kg)
T51-84* 81⁄2
" (216mm)
3
⁄16
" (5mm) BMT95-4(-7) — — .4 lb. (.2 kg)
GRILLES MOUNTING 8" (203mm) LOUDSPEAKERS
DIMENSIONS MOUNTS OPTIONAL
MODEL DIAMETER (A) PROJECTS (B) (C)** (D) *** ENCLOSURE (OR) MTG. RING TILE BRIDGE WEIGHT
51-8 (EZ)95-8 Series, 75-8(E1)(E2),
EZ96-8, T95-8 Series,
76-8(E1)(E2), 81-8R(S) 1.1 lb.
123⁄4"
1
⁄4"7
5
⁄8"11
1
⁄4" 199-8, Q408, CS95-8(NS) P77-8, P78-8 (.5 kg)
(324mm) (6mm) (194mm) (286mm) 96-8 Series
▲
—
EQ81
▲
T51-8 — T95-8 Series, T75-8(E1)(E2) 81-8S 1.2 lb.
BMT95-8(-7), EZ95-8 81-8S****
(.55 kg)
* Model includes provisions to accommodate ceiling thickness up to 2" thick.
** (C) Loudspeaker mounting hole or stud pattern.
*** (D) Baffle mounting hole pattern.
**** When a torsion spring grille, tile bridge, and
enclosure are specified, the grille will mount to the tile bridge only and not to the enclosure’s
torsion tabs. The enclosure will need to be secured to the tile bridge via four 8-32 screws (not included). [In some cases, the enclosure may
need to be rotated to avoid the torsion tabs and insure a proper fit.] See SL3-1431 for additional information.
▲
EQ81 tile bridge works only with 96-8 Series enclosures.
ARCHITECT AND ENGINEER SPECIFICATIONS
51 Series
Screw Mount Grilles. Round recessed baffle shall be Atlas Sound
Model _____ [51-4 for 4" loudspeakers; 51-8 for 8" loudspeakers]. It
shall be constructed of one-piece 24-gauge CRS. Hardware for
mounting Atlas Sound loudspeaker Model _____ shall be furnished.
Baffle shall be used in conjunction with Atlas Sound enclosure Model
_____ or mounting ring Model _____. For applications that require a
tile bridge, Atlas Sound Model _____ shall be used. Baffle dimensions
shall be ____________. Finish shall be textured white epoxy.
Torsion Spring Grilles. Round recessed baffle shall be Atlas Sound
Model _______ [T51-4, for 4" loudspeakers; T51-8 for 8" loudspeakers]. It shall be of one-piece 24-gauge CRS and utilize a torsion
spring device to attach to either Atlas Sound enclosure Model _____
or mounting ring Model _______. For applications that require a tile
bridge, Atlas Sound Model _____ shall be used. Baffle shall have dimensions of __________ and have welded studs on rear for mounting
Atlas Sound loudspeaker Model _______. Finish shall be textured
white epoxy.
Extra torsion spring mounting holes allow
field adjustment for ceiling depth.
Torsion spring mounting holes
for typical ceilings.
Loading...