Page 1
Channel Bars
180 Series / 186 Series
Channel Supports
180 Series
186 Series
180 Series Install 180 Series channel bars in suspended ceilings as an
eco nomi cal means of supporting loudspeaker assemblies.
Pre-drilled holes provide easy installation in any type of
protec tive en clo sure or plaster frame. Models 180-2 and
180-4 are constructed of galvanized CRS.
186 Series 186 Series mounting rails provide quick and efficient
installation of protective enclosures and mounting rings.
These mounting bars feature an adjustable slot and sliding
flat nut which allows for a wide range of enclosure or
mounting ring positioning. 186 Series is ideal for use with
Atlas Sound 75 and 76 Series mounting rings as well as
95 and 96 Series en clo sures in 16" (406 mm) and 24" (610
mm) stud con struc tion. Models 186-16 and 186-24 are
constructed of gal va nized CRS.
Specifications
180-2
Length 233⁄4" (603 mm)
Weight .5 lbs. (.227kg)
180-4
Length 473⁄4" (1213 mm)
Weight .95 lbs (.431 kg)
186-16
Length 18" (457 mm)
Weight .5 lbs. (.227kg)
186-24
Length 26" (660 mm)
Weight 1.4 lbs (.635 kg)
Architect and Engineer Specifications
The channel supports and suspension hangers described above are
accessories, and their use is de ter mined by the mounting method
required and the baffle, enclosure, or pack age series selected. Refer to
the Architect and engineer Spec i fi ca tions outlined on each com po nent
spec i fi ca tion sheet.
©2011 Atlas Sound L.P. All rights reserved. Atlas Sound and Strategy Series are trademarks of Atlas Sound L.P. All other trademarks are the property of their respective owners. ATS003055 RevC 7/11
1601 JACK MCKAY BLVD. ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
AtlasSound.com
1/1
Loading...