Atlas Copco PAS 200 HF T4F Reference Manual
Product Reference
PAS 200 HF T4F
Diesel - Qmax 850 m³/h (3,740 USgpm) - Hmax 50 m (164 ft)
PAS HF - Vacuum prime centrifugal pumps
The pump system consists of a centrifugal pump and a separator, which enables air to be
separated from the liquid and be sucked by a vacuum pump - making automatic priming
possible. Even with suction heights of several meters the machine rapidly evacuates
the air from the suction pipe and starts to pump. Additionally, thanks to the semi-open
impeller, the PAS HF range is also suitable for pumping liquids with solids in suspension.
Applications
Both Atlas Copco and Varisco have decades of experience in designing and producing
pumps. We have put those years of expertize into providing a solutions portfolio that
works across multiple applications. The PAS HF (high flow) range is packed with features
that not only meet, but exceed the needs of the market. We are focused on an efficient,
extremely versatile pump that is suitable for many industries, including construction,
general dewatering and emergency applications, such as flood clean up.
Benefits
Pump
High efficiency: 75% (B.E.P.)
Rapid “dry” priming
Up to a height of 7,5 m (24.6 ft)
High resistance
To abrasive liquids and turbid sandy waters
Semi-open impeller
Solids handling up to 76 mm (3”)
Diaphragm vacuum pump
Oil free suitable for dry running: no contamination
of the environment
Mechanical shaft seal in oil bath
It allows the “dry running” operation of the pump
Wear plate
Cast iron wear plate that is easily replaceable
Easy maintenance
Without lifting devices: hinged cover for direct
access to the impeller
Product Reference
1
Product Reference
0
2
4
6
8
10
m
0
8
16
25
33
ft
0
Q[m3/h]
Q[l/min]
0
10
20
30
40
50
200
400
600
800
H
[m]
Q[USgpm]
0
H
[ft]
40
80
120
160
2200 rpm
2000
1800
1400
1600
1800 rpm NPSHr
70%
75%
65%
60%
70%
0
10000
12000
14000
4000
8000
6000
4000
2000
0
500
1000
1500
2000
2500
3000
3500
PAS 200 HF T4F
Performance curves
Test according to UNI EN ISO 9906 standard - level 2
Test liquid: clean water, density 1,000 kg/m³
Spherical solids handling: D.76 mm (3”)
Priming time: 30 s from 1,5 m (4.9 ft)
Max absorbed power: 78,0 kW - 104.6 HP (2.200 rpm)
2Product Reference
Loading...