Atlas VPB-1A, VPCS-2G-2, VPCS-2GPB-2, VPCS-3GPB-245, VPVT-4PB Brochure & Specs

Vandal-Proof Intercom Stations

Stations with Cone Loudspeaker & Call Switch Option

VPCS Series High-security vandal-proof loudspeaker stations are equipped with a 21⁄2" diameter moisture-proof resin

impregnated cone loudspeaker for clear voice / signal transmission with durable performance. The overall depth of
all units is a shallow 21⁄8" (54 mm) allowing installation in standard size E.O. boxes. VPCS-2G Series and VPCS-2GPB
are 2-gang versions. VPCS-3GPB-245 is a 3-gang model. All models include a two-piece die-cast barrier (patent
applied for) to protect the loudspeaker assembly from vandalism. Models with "PB" designation include a vandal-proof
call switch. The switch is a heavy-duty, momentary action push-button with a 1.5A 250VAC contact rating. The 25V
transformer has .25, .5, 1 & 2 watt taps. VPCS Series face plates are constructed of 11-gauge stainless steel.

Model Description Dimensions

VPCS-2G-2

VPCS-2GPB-2

VPCS-3GPB-245

25V; 2-Gang

25V; 2-Gang w/ Call Switch

25V; 3-Gang w/ Call Switch Width 6

Plate-Mounted Call Switch

VPB-1A Intercom accessory includes a vandal-resistant push button mounted to an all new single-gang, 12-gauge

stainless steel plate which may be used in conjunction with VPVTPB, VPCS-2G-2(PB) and VPCS(PB) Series intercom
stations. Switch may also be used as a stand alone signaling device when a separate or remotely located call-origina­tion button is desired. Switch is a SPST normally open circuit with a 3-amp contact rating. Hardware installs using a
6–32 holt-head driver bit for a standard 1⁄4" nut driver.

Model Description Width Height Depth

VPB-1A

Plated Mounted 1-gang Call Switch

23⁄4" (70 mm) 41⁄2" (114 mm) 13⁄8" (35 mm)

43⁄4" Square (121 mm)
21⁄8" Depth (54 mm)

3

⁄8" (162 mm)

3

⁄4" (121 mm)

Height: 4

1

⁄8 (54 mm)

Depth: 2

Eight

VPCS-2GPB-2

Stations with Compression Driver & Call Switch Option

VPVT-4PB Series Loudspeaker station with high-efficiency compression driver mounted to a 12-gauge stainless

steel plate provides two-way communication for vandal-proof use in detention facilities, correctional institutions, and
secured access applications. Rugged recess-mounting assemblies incorporate the patented VT Series, environment­resistant compression driver; recognized throughout the world for dependable performance and effective voice and
signal tone distribution. High-intelligibility, 8 Ω compression driver also functions as a microphone to provide clear
voice communication. VPVT-4PB incorporate a vandal-resistant call-origination button with 3 amp contact rating to
provide call-in signaling capability. Station available in high-power 15 watt models with 25V transformer. VPVT-PB

Series measures 71⁄4" square and installs into VP-77 backbox. Backboxes are ordered separately.

Model Power Rating Transformer Frequency

VPVT-4PB

15 watts, 25V

25V — Yes VP-77

Response

Call Switch Optional Back Box

Recessed Backbox for Vandal-Proof Stations

VPVT-4PB Protective backbox is constructed of 16-gauge CRS and finished in black textured enamel for installation of

specified vandal-proof loudspeaker station assembly.

Model Width Height Depth Mounts

VP-77

51⁄2" (139.7 mm) 61⁄4" (158.75 mm) 31⁄2" (88.9 mm) VPVT-PB Series

VPB-1A

VPVT

800.876.3333

VPVT (side)

Plate-Mounted Wall Switch

VP-77

71

Vandal-Proof Intercom Stations

Stations with Compression Driver and Call Switch

WPVT-S / WPVT-F Series. Surface and flush-mounting outdoor intercom and paging loudspeaker assemblies provide

weatherproof and vandal-proof two-way communication with call-in capability for remote guard and security stations,
entry and exit gates, perimeter doors and parking garages.

Environment-resistant assemblies include die-cast water sealed VT Series 8 Ω compression driver loudspeaker
available with 15 or 2 watt transformer and pre-mounted call SPDT-type switch protected by a weatherproof rubber
boot. WPVT-S Series are surface mounting assemblies size 41⁄4" Square x 31⁄8" Depth. WPVT-F Series are recess /
flush-mounting versions size 6" Square x 33⁄16" Depth. Both model series are finished in neutral gray(N) epoxy and
install to a standard 4" E.O. Box (not included). A large selection of installation accessories are also available. See
Installation Accessories for Voice / Tone Loudspeakers in section 7, page 66.

WPVT-F

Series

Visikom System with

Two CE-2-AC Telephones

WPVT-S

Series

Model Power

WPVT-1SN

WPVT-4SN

WPVT-6SN

WPVT-1FN

WPVT-4FN

WPVT-6FN

Rating

15 watts (8

15 watts

2 watts

15 watts (8

15 watts

2 watts

Transformer

Ω) — 600 Hz – 5.5 kHz -26 dBm

25V

25V

Ω) —

25V

25V

Frequency
Response

Sensitivity As
Microphone

Visikom Intercommunication System

Visikom Telephone Visitation System

PVP-24 / PVP-6. Modular telephone intercommunication system accommodates up to 24 independent telephone

conversations of two or more telephone stations each for use where physical separation between communicating
individuals is desired. Typical applications include customer telephones and visitation areas of detention, correctional
and penitentiary facilities. Unique filter circuitry employed assures privacy and isolation from crosstalk. Plug-in design
provides simple installation, servicing and expansion capability. System is comprised of PVP-24 control unit, PVP-6
plug-in interface module and standard telephone stations with two form "C" (DPDT) hook switches including Atlas
Sound CE Series. A Surface-mounting control unit includes integral power supply, four 3⁄4" cable access holes and
ports for installation of up to four PVP-6 modules. Each plug-in module will control up to six isolated telephone circuits
for a total system capacity of 24 circuits. Chassis and lift-off cover are constructed of 18-gauge CRS and finished in
textured black epoxy. Wiring requirements are two conductor, telephone type. For complete wiring and installation
information, see manual #245691 at AtlasSound.com.

Model Description Power Req. Power Output Capacity Dimensions

PVP-24

*System uses telephone station Model Series CE and DP-1. See "Telephone Intercom Stations and Accessories'' — this section.

Common Talk Telephone Intercom Applications

Plug-in Interface Module 117VAC 8VAC @ 2 Amps Four PVP-6 91⁄2" x 13" x 41⁄2"

(241 mm x 330 mm x 114 mm)

Atlas Sound offers a selection of telephone stations and related accessories which can be used to create a variety of
common talk telephone intercom systems. For details on individual models, see sheet SL8-1434, "Telephone Intercom
Accessories" at AtlasSound.com.

PVP-24 with (4) PVP-6 Installed

(cover removed)

72

AtlasSound.com