Page 1
STRATEGY SERIES® II 4" SPEAKER SYSTEMS
FAP42TC
FAP42TC
Shown without grille
(included)
(included)
C-Ring/V-Rail
Mounting System
(optional)
FAP42-TR
FEATURES
• Low depth (4") speaker system for limited space applications
• Easy installation in drop tile or sheetrock ceilings via C-ring/V-rail tile bridge and "dog leg"
mounting system (Included)
• Front mounted tap selector switch for easy system tuning adjustments includes transformer
bypass setting for 8 ohm direct coupled operation
• "Press fit" grilles blend better into contemporary architecture
• Enhanced quality 70.7V/100V internal transformers minimize insertion loss and maintan low
frequency response while providing increased output for higher SPL applications
• UL Listing Pending
APPLICATIONS
FAP42TC combines superior coaxial loudspeaker performance with wide dispersion and easy
installation. A low profile enclosure and wide coverage make the FAP42TC a perfect choice for low
ceilings. The FAP42TC will satisfy the needs of owners, architects, contractors, and consultants
by delivering true, high fidelity sound reproduction in an attractive and easy-to-install system.
The FAP42TC is ideal for high-intelligibility voice, music, and signal reproduction in commercial,
industrial, and institutional applications.
GENERAL DESCRIPTION
The FAP42TC’s 130 degree dispersion angle effectively reduces the number of loudspeakers
necessary to achieve coverage in distributed systems with low ceilings.
The loudspeaker component matches the performance of the legendary Atlas Sound Strategy FA
Series. High quality construction 1" voice coil 4" coaxial cone type driver includes polypropylene
cone with a butyl rubber surround. The 19mm coaxially mounted tweeter is constructed of PEI.
This loudspeaker is factory assembled to an optimally tuned & ported deep drawn enclosure and
includes a specially designed 16 watt low saturation 70.7V/100V transformer. A convenient front
mounted selector switch allows tap selection without the need to remove the speaker from the
ceiling. This switch also includes a transformer bypass setting for 8 ohm operation.
MOUNTING ACCESSORIES
Mounting is simplified with Strategy style "dog leg" tabs that allow easy installation into drop tile
or drywall ceilings with provided tile bridge assembly. The tile bridge consists of (2) "V" shaped
formed mounting rails and a C-ring assembly. The C-ring can be attached to the rails with the
screws provided to extend support to the T-bar grid in suspended ceiling applications. Multiple
hole locations are provided to allow the C-ring to be positioned to the outer edge the tile if
necessary.
For existing dry-wall applications the tile bridge c-ring and support rails can be inserted into
the hole cut for the FAP42TC. For easy positioning the "V" shaped support rails match the
shape of the C-ring tabs for easy maneuvering and location when working "blindly" above the
deck. A uniquely designed "easy access" input panel on the side of the enclosure allows for
conduit runs using flexible conduit. Wiring Terminals are concealed below this cover for easy
daisy chain wiring to other full range loudspeakers or Atlas Sound FASUB70 subwoofers. The
package includes an attractive press-fit grill which nicely matches contemporary architecture.
For new construction drywall ceiling applications, the optional FAP42-TR trim ring is available.
This unit provides a marked location for drywall installers to cut around essentially reserving the
desired location in the ceiling until final installation of FAP42TC. Mounting holes are provided to
accommodate 16" or 24" OC stud/joist mounting.
A support ring is also provided on the top of the FAP42TC enclosure to facilitate an auxiliary
support cable. NOTE: IT IS MANDATORY THAT THIS SECONDARY SUPPORT BE UTILIZED
IN DROP CEILINGS FOR SAFETY AND SEISMIC CONSIDERATIONS).
One
ONE
MODEL
FAP42TC
© 2004 Atlas Sound Printed in U.S.A. 001004 ATS001871 RevB 10/04 SL1-2049
POWER 70.7V FREQUENCY SENSITIVITY
RATING TAPS RESPONSE (±7dB) (1W/1M)
25 Watts
1, 2, 4, 75Hz - 20kHz 88dB 4" Poly Cone 10 oz Coaxially Mounted 10.5" (267mm) Dia 134 Cubic 9" 5.4 lbs.
(Transformer)
8, 16 Average Butyl Rubber (364g) PEI Dome 4.24" (108mm) H Inches (229mm) (2.45kg)
Limited
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
PEFORMANCE SPECIFICATIONS
WOOFER
Specifications subject to change without notice
Specifications subject to change without notice
WOOFER
MAG WT
HF
.
DIMENSIONS
DRIVER
AtlasSound.com
AtlasSound.com
ENCLOSURE CUT-OUT WEIGHT-LESS
VOLUME DIMENSION TILE BRIDGE
2.65
2.65
Page 2
Specifications subject to change without notice
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2004 Atlas Sound Printed in U.S.A. 001004 ATS001871 RevB 10/04 SL1-2049
AtlasSound.com
Page 3
ARCHITECT AND ENGINEER SPECIFICATIONS
One
The loudspeaker system shall be Atlas Sound FAP42TC. System
shall include a high performance 4" coaxial loudspeaker, low profile
enclosure and press-fit grille for conventional ceiling installation.
Frequency response for the system shall be 75Hz to 20kHz (±7dB).
Sensitivity shall be 88dB average. Loudspeaker shall be comprised
of an 4" coaxial cone type driver. Cone shall be constructed of
polypropylene with a butyl rubber surround. The19mm tweeter shall
be constructed of PEI. Magnet shall be a minimum of 10oz. (264g)
and the voice coil diameter shall be 1" (25mm).
Transformer shall be (70.7/100V) volt type with 1, 2, 4, 8 and 16 watt
primary taps (@70.7V) with a front mounted tap selector switch to
include transformer bypass setting for 8 ohm direct coupled operation.
Enclosure shall be constructed of deep drawn steel. Internal volume
shall be 134 cubic inches. To facilitate connection in conduit systems,
enclosure shall be equipped with an access panel covering a
recessed terminal cup. This cover shall provide a combination 3/4"
(19mm inside diameter) / 1" (25mm inside diameter) knock-out to
conduit.
External wiring shall be accomplished via wiring connector with screwdown terminals to provide secure wire termination. The connector
shall facilitate in/out wiring and shall be located in the recessed area
behind the conduit access panel.
Seismic support eye shall be provided for an additional suspension
point when used in drop tile ceilings. Construction of enclosure shall
be a minimum of 18 gauge deep drawn galvanized metal.
The system shall include a support backing plate to reinforce the
ceiling material and tile support rails for use on either 2’ x 4’ (609
x 1219mm) or 2’ x 2’ (609 x 609mm) suspended ceiling tiles. This
assembly can all be installed from beneath the ceiling tile. Overall
front face diameter shall not exceed 10.5” (267mm); overall depth
from the bottom of bezel to top of enclosure shall not exceed 4.24"
(108mm).
Grilles shall be press-fit, manufactured from 24 gauge perforated steel
mesh and finished in white epoxy. Round grill shall be 8.49" (216mm)
Diameter.
The loudspeaker shall weigh no more than 5.4 lbs (2.45kg).
The loudspeaker shall be the Atlas Sound FAP42TC.
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435
© 2004 Atlas Sound Printed in U.S.A. 001004 ATS001871 RevB 10/04 SL1-2049
Specifications subject to change without notice
AtlasSound.com
2.67
Loading...