Atlas DSP2210, DSP2212 Owner's Manual

Owner’s Manual

DSP2210 &

DSP2212

Digital Processor

and Amplifier

DSP2210 &

DSP2212

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 1 – AtlasSound.com

Specifications are subject to change without notice.

DSP2210 &

RISK OF ELECTRIC SHOCK

DO NOT OPEN

ATTENTION

RISQUE DE DECHARGE ELECTRIQUE

-NE PAS OUVRIR.

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK

DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

CAUTION

´

DSP2212

Digital Processor

and Amplifier

Owner’s Manual

Table of Contents

Important Safety Instructions ......................................................................................................................................... 2

Introduction ..................................................................................................................................................................... 4

System Overview Flow Diagram ....................................................................................................................................5

Panel Layout ..................................................................................................................................................................... 6

Installation and Endpoint Termination ........................................................................................................................... 7

Software Installation and Setup ...................................................................................................................................10

Specifications ................................................................................................................................................................ 14

Troubleshooting Guide .................................................................................................................................................15

Warranty .........................................................................................................................................................................16

Important Safety Instructions

The lightning flash with arrowhead symbol within an
equilateral triangle, is intended to alert the user to the
presence of uninsulated “dangerous voltage “ within the
product’s enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the product.

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this device near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other devices (including amplifiers) that produce heat.

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the
other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they
exit from the device.

11. Only use attachments/accessories specified by the manufacturer.

12. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the device. When a cart is used
use caution when moving the cart/device combination to avoid injury from tip-over.

13. Unplug this device during lightning storms or when unused for long periods of time.

14. Refer all servicing to qualified service personnel. Servicing is required when the device has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled, or objects have fallen into the device, the device has been exposed
to rain or moisture, does not operate normally, or has been dropped.

15. WARNING: To reduce the risk of fire or electric shock, this device should not be exposed to rain or moisture and objects filled with
liquids, such as a vase, should not be placed on this device.

16. To completely disconnect this equipment from the mains, disconnect the power supply cord plug from the receptacle.

17. The mains plug of the power supply cord shall remain readily operable.

AtlasSound.com – 2 –

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Specifications are subject to change without notice.

Telephone: [phone] • Fax: [phone]

Owner’s Manual

CAUTION – When Installing the Product

• Plugging in or unplugging the power cord with wet hands may result in electric shock.

• Never move the device with the power cord plugged into the wall, as damage to the power cord may result.

• When unplugging the cord from the wall, grasp the plug, NOT the cord.

• Never install this device in humid or dusty locations, nor in direct sunlight, near sources of heat, or in areas where sooty smoke or

steam are present. Fire and electric shock may result.

• Keep all sides of the device at least 31⁄2" away from objects that may obstruct air flow to prevent the unit's internal temperature rise.

WARNING – When the Device is in Use

• To prevent electric shock, do not remove the device cover as there are high voltage components inside. Refer all servicing to Atlas Sound.

• Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the

AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the device as this may cause fire or electric shock:

• Smoke or strange smell coming from the unit.

• If the device falls or the case is damaged.

• If water or any metallic objects falls into the device.

• If the power supply cord is damaged in any way.

• If the device is malfunctioning.

• Do not insert or drop metallic objects or flammable materials into the ventilation holes of the device's cover,

as this may result in electric shock or fire.

• Do not place any containers with liquid or metallic objects on the top of the device.
If any liquid spills into the unit, fire or electric shock may result.

• Never operate this device or touch the power supply cord during an electrical storm, electric shock may result.

• Never exceed the wattage on the product when connecting equipment. Fire and/or property damage may result.

• Operate the device only with the voltage specified on the unit. Fire and/or electric shock may result if a higher

voltage is used.

• Do not modify, kink, or cut the power cord. Do not place the power cord in close proximity to heaters and do not
place heavy objects on the power cord, including the device itself, doing so may result in fire or electrical shock.

• Ensure that the safety ground terminal is connected to a proper ground. Never connect the ground to a gas pipe
as a catastrophic disaster may result.

• Be sure the installation of the product is stable, avoid slanted surfaces as the product may fall and cause injury or property damage.

DSP2210 &

DSP2212

Digital Processor

and Amplifier

CAUTION – When the Device is in Use

• Never place heavy objects on the product, causing it to fall and/or break, resulting in personal injury and
property damage. In addition, the product itself may fall and cause injury and property damage.

• Contact Atlas Sound for instructions on cleaning the inside of the unit. Large accumulations of dust inside
the unit may result in heat buildup and fire.

• Ensure that the power supply plug is securely plugged into the wall outlet. Never allow dust to accumulate
on the power plug or inside the wall outlet.

• When cleaning the unit or the unit is not to be operated for an extended time period, unplug power cord
from the wall.

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 3 – AtlasSound.com

Specifications are subject to change without notice.

DSP2210 &

DSP2212

Digital Processor

and Amplifier

Owner’s Manual

Introduction

The Atlas Sound DSP2210/DSP2212 digital processor “Privacy” system is a self contained, compact multi-zone digital DSP-GUI controlled

processor and digital amplifier capable of simultaneous distribution of masking, paging, and background music signals for use in Industrial,

Institutional, Commercial and Government facilities.

The Atlas Sound DSP2210/DSP2212 is capable of automatic mixing, set up and administration of all inputs/outputs per zone (channel). This

is accomplished via an intuitive ‘simple to use’ Graphic User Interface (GUI) managed via a local laptop or desktop computer that is running

Microsoft® Windows®. It provides up to x2 channels of independent on-board digital Class-D amplifiers rated at 25W RMS at 70V. It has

a pink noise generator which is random and non-repeating up to (215) hours with EQ adjustments programmable on a per zone basis. The

DSP’s provide dynamic control and management based on IEEE802.1 AVB standards (Audio-Video Bridging) with independent 1⁄3 Octave

(28) band EQ *(Filter type is Butterworth @ 19dB and Linkwitz-Riley at 24dB) and Parametric EQ 8-band for calibration of all PA and masking

signals on a per zone basis. Paging (PA) levels are adjustable in 0.5dB increments per zone on Line Level (Music) and Microphone paging

inputs. The system has the ability to expand up to (32) systems (64 zones) with primary and secondary assignment in a zone paging dialing

plan. It also provides the ability to set up “All Zone” and “Group zone” pages through the GUI.

The Atlas Sound DSP2210/DSP2212 system provides the following basic masking capabilities:

• Create An Acceptable Level of Speech Privacy In Open Work Areas

• Enhance Speech Privacy Between Modular Offices

• Decrease Intelligibility and Noise Distraction Caused By Stand-Up, Casual Conversations and Random Room Noises

• Reduce Awareness of Existing Sounds

• Increase Worker Productivity and Employee Satisfaction

• Enhance Clients Revenue Due to Less Employee Distraction

• Lessen The Need For Unexpected and Expensive Acoustical Upgrades

• Flexibility Which Insures Specific Masking Spectrums For Varying Ceiling Types Including; T-Bar, Open, Wood Slats And Clouds

Basic Function

• (2) Channels of random pink noise generator non-repeating up to 215 hours

• (2) Audio outputs of 25WRMS digital Class-D amplification at 85% efficiency

• (2) Independent outputs of 1⁄3 Octave 28-band EQ defined and shaped in GUI

• IEEE 802.1 AVB (Audio Video Bridging) technology for time aligned networking of multiple units (DSP2212 Only)

• AVB operation allows IP based paging via Ethernet connection (DSP2212 Only)

• Multiple audio source inputs for Background Music and Paging

• Microphone input with system mute

• On-board MAC Address (DSP2212 Only) for IP addressability compatible with DHCP server

• User friendly GUI (Sound Media Interface) for set up

• Zone expansion from 2 to 64 via standard Ethernet LAN (DSP2212 Only)

• All-Call page, Group Zone page and single zone page defined in GUI

• Independent Tone Controls for all paging sources

• Microphone balanced input with on-board Phantom Power at 12VDC

• Non-volatile DSP memory components for all system controls with (10) year memory

• DSP2210/DSP2212 multiple mounting options; Rack, Cabinet, Shelf or wall at 1RU (1.75") height x 10" deep

• Visual status front LCD Display for all major input and output Control functions

• Overload, short and current limit protection with automatic reset for all critical components

• All power components are UL recognized, boards are UL94V0 and RoHS

• DSP2210/DSP2212 is UL/CUL/FCC and CE (International) listed

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

AtlasSound.com – 4 –

Specifications are subject to change without notice.

Telephone: [phone] • Fax: [phone]

Owner’s Manual

Limiter

Bass-Treble

Para - EQ

Music R

Lynx

SMS

Processor

USB

Phy

Mixer 2

Rotary

LCD

Mixer 1

SMS

Processor

A-D

70V Line 2

Mic CC

SMS

Processor

SMS

Processor

Phy

Facility

Limiter

Bass-Treble

Para - EQ

Bass-Treble

Music R

Phy

Zone Amp 2

Noise

Filter

Graphic EQ

Mixer 1

SMS

Processor

D-A

70V Zone 1

DSP2210 &

DSP2212

SYSTEM OVERVIEW – SIGNAL FLOW DIAGRAM

Mic

Music L

Encoder

A-D

Bass-Treble

Noise Filter

AVIO Core

Lynx

AVIO Core

Interface

DSP Block

Lynx

AVIO Core

I/O

Display

Music Mono

Mix

DSP2212 Functional

Graphic EQ

Graphic EQ

DSP

Lynx

AVIO Core

AVB Network

RJ45

Network

Digital Processor

and Amplifier

High Pass

High Pass

System Functional Diagram

Zone Amp 1

D-A

Zone Amp 2

D-A

DSP2212

Preliminary

st

April 1

, 2011

70V Line 1

Rev 1.0

Mic

Music L

USB

Mic CC

Rotary

Encoder

© Intelligent Media Technologies, Inc. 2011

DSP2210 Functional

A-D

A-D

DSP Block

SMS

Lynx

AVIO Core

DSP

Processor

Lynx

AVIO Core

I/O

Music Mono

Graphic EQ

Mixer 2

Mix

High Pass

High Pass

System Functional Diagram

LCD

Display

Zone Amp 1

D-A

DSP2210

Preliminary

st

April 1

, 2011

70V Zone 2

Rev 1.3

© Intelligent Media Technologies, Inc. 2011

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: [phone] • Fax: [phone]

– 5 – AtlasSound.com

Specifications are subject to change without notice.