![](/html/21/2132/2132c124ef6a439d9023e4caba66561c9700548aa5d4f5de09a6fbf35dbbc021/bg1.png)
3505 HUTCHINSON ROAD
CUMMING, GA 30040-5860, USA
AA
TTLLAASS
INDUSTRIAL FLAT PANEL PC MONITOR
QUICK INSTALLATION GUIDE - ATM1700/ATM1700T
Description:
The Atlas ATM1700/ATM1700T is a high performance 17" color TFT
flat panel monitor specifically designed for harsh industrial
environments including Class I & II, Division 2 Hazardous Locations.
The ATM1700/ATM1700T accepts standard analog VGA input or
digital DVI input, and can display all VESA video modes up to 1280 x
1024 at 75 Hz with 16 million colors. An optional 5-wire analog touch
screen (ATM1700T) is available that offers both RS-232 and USB
interface capability. The monitor is housed in a heavy duty steel chassis
with a powder coated machined aluminum bezel. The monitor is
certified to NEMA 4/4X/12 standards, is UL/CUL listed, meets CE
ATM1700/ATM1700T
NN
::
OOTTEE
EE T HE HARDWARE USER’S GUIDE, ATM-17-USER,
S
INCLUDED ON THE SUPPLIED DOCUMENTATION & DRIVER CD FOR
ADDITIONAL DETAILS. THE USER’S GUIDE IS IN PDF FILE FORMAT AND
REQUIRES DOWNLOADING ADOBE’S FREE ACROBAT READER TO OPEN
AND VIEW.
requirements and is RoHS compliant. Panel mounting is simplified
using convenient mounting clips instead of conventional studs. All
monitors are shipped with a power input wiring receptacle, 6’ VGA
cable, 6’ RS-232 cable (ATM1700T only), 2m USB Cable
(ATM1700T only), mounting hardware, this Quick Installation Guide,
and CD-ROM containing Hardware User’s Guide (ATM-17-USER)
and touch screen driver software for Windows 98/NT/2000/XP/Vista.
w w w . a u t o m a t i o n d i r e c t . c o m
1. Verify Contents of the Box:
• Atlas Flat Panel Monitor – ATM1700 or ATM1700T (The “T” at the end of
the part number designates the touch screen option.)
• VGA video cable – 6’ length
• RS-232 Serial touch screen cable (ATM1700T only) – 6’ length
1 - 8 0 0 - 6 3 3 - 0 4 0 5
• USB touch screen cable (ATM1700T only) – 2m length
• Mounting clips and screws (qty of 14)
• USB retention bracket and mounting screw (ATM1700T only)
• Documentation and Driver CD
Contents:
AAttllaass
Monitor
Mounting Clips
(qty. 14)
(“T” ver. only)
Dimensions:
Packaging
Material
USB Cable
RS-232 Cable
& hex spacers
(“T” ver. only)
Documentation
& Driver CD
VGA Video
Cable
Agency Approvals:
Certifications & Standards
Name UL508 UL1604 CE
AAttllaass
Flat Panel Monit
E191072 E313546
or
1
EN 55022-1: Class A,
EN 61000-3-2: Class A,
EN 61000-3-3,
EN 61000-6-2,
IEC 60950-1
![](/html/21/2132/2132c124ef6a439d9023e4caba66561c9700548aa5d4f5de09a6fbf35dbbc021/bg2.png)
2. Install Monitor through Enclosure Door or Wall
* NOTE: USE ONE OR THE
OTHER, NOT BOTH.
TOUCH SCREEN
CABLES *
VIDEO CABLE *
D
ISPLAY POWER
WARNING
T
ouch Screen is still
a
ctive while display
p
ower is off
• Use dimensions as shown in the diagram below to provide a
rectangular mounting cutout in an approved NEMA 4/12 enclosure’s
door or wall.
• Mount the monitor through the enclosure cutout, install and tighten (14)
mounting clips to a torque of 8.0 inch-pounds as shown in the diagram
to the right.
Cutout Dimensions:
Mounting Clip Installation:
w w w . a u t o m a t i o n d i r e c t . c o m
WARNING: An operating temperature of 0 to 50 °C (32 to 122 °F)
needs to be maintained for proper operation of the monitor.
3. Connect DVI or VGA Video Cable between Monitor & PC
Cable Connections:
WARNING: Damage can occur by applying excessive torque to the
mounting clips.
• Connect the included 6’ VGA video cable from the video connector on
the monitor to the video output connector on the host PC being used
with the monitor or use a digital DVI-M cable (sold separately).
• If using a DVI-D cable, then special instructions apply when applying
power; see warning to the right in regards to selecting the video input.
NN
::
OOTTEE
HE 17” MONITOR WILL PRODUCE THE BEST IMAGE QUALITY IF
1 - 8 0 0 - 6 3 3 - 0 4 0 5
T
THE PC IS SET FOR A 1280 X 1024 PIXELS @ EITHER 60, OR 75 HZ.
VIDEO MODE.
4. Connect USB or Serial Cable between Monitor & PC
• Applies to ATM1700T touch screen version only.
• Use either the included 6’ RS-232 Serial touch screen cable or the 2m
USB touch screen cable from the appropriate connector on the monitor
to the appropriate connector on the host computer; do not connect
both.
• If using the USB cable, secure the cable using the included USB
retention bracket and screw; consult the Hardware User’s Guide,
ATM-17-USER, on the supplied Documentation and Drive CD for details.
WARNING
To minimize the risk of potential safety problems, you should follow all applicable local and national codes that regulate the installation
and operation of your equipment. These codes vary from area to area and it is your responsibility to determine which codes should be
followed, and to verify that the equipment, installation, and operation are in compliance with the latest revision of these codes.
Equipment damage or serious injury to personnel can result from the failure to follow all applicable codes and standards. We do not guarantee the
products described in this publication are suitable for your particular application, nor do we assume any responsibility for your product design,
installation, or operation.
If you have any questions concerning the installation or operation of this equipment, or if you need additional information, please call Technical
Support at 770-844-4200.
This publication is based on information that was available at the time it was printed. At Automationdirect.com
our products and services, so we reserve the right to make changes to the products and/or publications at any time without notice and without
obligation. This publication may also discuss features that may not be available in certain revisions of the product.
®
we constantly strive to improve
2