Atlas 8600 User Manual

1

A

TLAS

8600

S

TRINGING

M

ACHINE

U

SER’S

M

ANUAL

2

ANATOMY

The Atlas 8600 is shipped to you in two cartons.

Here is what the two cartons contain:

1). Electronic Tension Head

2). Racquet Mount and Floor Stand

3

4

2

6

11

8

1 13

9

5

15

18

10

17

14

7

20

16

12

19

21

22

23

26

25

24

27

3

1. Side Support 2. Center Support

3. Rubber Cover 4. Center Support Adjustment Knob

5. Side Support Arm Adjustment Knob 6. Mounting Stock

7. Mounting Stock Locking Knob 8. Turntable

9. Turntable Track 10. String Clamp

11. String Clamp Base 12. Side Support Arm

13. Rotary String Gripper 14. Green Tension Button

15. Upper Housing 16. Lower Housing

17. Control Panel 18. Side Panel

19. Height Adjustment Knob 20. Tool Tray

21. String Reel Holder 22. Column

23. Foot (Base) 24. Rubber Foot

25. Tension Adjustment Knob 26. Shoulder

27. Power Cord

4

ASSEMBLY

Step 1 :

Secure column to
foot using 4 long
bolts, washers
and nuts by a 6
mm and a12 mm
wrenches.

Screw the string
reel holder into
the column.

Mount the tool
tray on the
column with the 4 small bolts by a 10 mm
wrench.

Insert the anchor plate in the column and
adjust the anchor post to the proper height and
lock with the adjustment knob.

Step 2 :

Remove the 4 nuts from the machine body. Place
machine body over column and align the 4 studs
under the machine with the corresponding holes in
the anchor plate. Secure the 4 nuts to the 4 studs.

Step 3 :

Screw the brake into the hole of the lower housing.
To lock the turntable, rotate the brake clockwise.
To unlock the turntable, rotate the brake
counter-clockwise.

Step 4 :

Remove the 4 Allen bolts from the
bearing pivot and insert turntable in machine body.
Tighten the 4 Allen bolts.