PCI modem 56K V.90/V.92
Installation Guide
Copyright
Copyright . 2001 by this company. All rights reserved. No
part of this publication may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any
language or computer language, in any form or by any means,
electronic, mechanical, magnetic, optical, chemical, manual
or otherwise, without the prior written permission of this
company.
Disclaimer
This company makes no representations or warranties, either
expressed or implied, with respect to the contents hereof and
specifically disclaims any warranties, merchantability or
fitness for any particular purpose. Any software described in
this manual is sold or licensed "as is". Should the programs
prove defective following their purchase, the buyer (and not
this company, its distributor, or its dealer) assumes the entire
cost of all necessary servicing, repair, and any incidental or
consequential damages resulting from any defect in the
software. Further, this company reserves the right to revise
this publication and to make changes from time to time in the
contents hereof without obligation to notify any person of
such revision or changes.
All brand and product names mentioned in this manual are trademarks and/or
registered trademarks of their respective holders.
Table of Contents
1 Package Contents
2 Card Layout
3 Installing the Modem
4 Setting Up your Modem for Windows 95/98
5 Setting Up your Modem for Windows ME
6 Setting Up your Modem for Windows 2000
7 Setting Up your Modem for Windows NT
8 Setting Up your Modem for Windows XP
9 Need More Information
A01-PP1/M2 (september2002)
Quick Start
Congratulations on your purchase of this Data/Fax modem.
This modem features the latest innovations in high-speed
modem design, making electronic communication faster and
easier. This Quick Start guide will show you how to install
and properly use the modem in order to take full advantage of
its features.
1 Package Contents
Carefully unpack and remove the contents. Contact your
dealer immediately if any of the following is missing or
damaged:
Modem card
Telephone cable
Quick start guide
CD-Title with Application Software and Installation Guide
2 Card Layout
3 Installing the Modem
This internal modem is easy to install. please follow the
instructions below.
To install the modem:
1. Turn off the system and unplug your system from the
power supply.
2. Remove the system cover. Refer to your housing manual
for instructions.
3. Locate an empty PCI slot on the system board.
4. Check your modem card model.
5. Plug the telephone cable into the LINE jack located at the
front of the bracket. Plug the other end of the telephone cable
into a telephone line jack.
6. To connect a telephone to the modem:
a. Plug the telephone to the modem PHONE jack.
b. Lift the handset and listen for a dial tone to check for a
working connection.
7. Turn your computer on. If your O.S is not Windows
9X/ME/2K/NT/XP, please read the guide.doc in Application
Software CD. There is more detail installation description
inside. If your O.S is Windows 9X/ME/2K/NT/XP, please
read section 4/5/6/7/8/9.
4 Setting Up Your Modem for Windows
95/98
1. Turn on your computer. As the Windows 98 operating
system boots up, it displays a Add New Hardware Wizard
dialog box shown on your screen for a few seconds with the
identifier name (PCI Communication Device) of your
modem.
2. Click Avanti, then a new dialog box will show on the
screen.
3. In the new dialog box, you have two choices to install a
driver. The default choice is search for the best driver for your
device and click Avanti.
4. New Add New Hardware Wizard dialog box will display
on the screen. Insert the Driver CD into the CD-ROM driver.
5. Choose Specify a location to browse for driver folder, and
click Browse, choose the CD-ROM location (Ex:
D:\Driver\win9X).
6. Windows 98 will copy the files onto your hard disk. Click
Fine.
5 Setting Up Your Modem for Windows
ME
1. Turn on your computer. As the Windows ME operating
system boots up, it displays Add New Hardware Wizard
dialog box shown on your screen for a few seconds with the
identifier name (PCI Communication Device) of your
modem.
2. Choose Specify the location of the driver. Click Avanti.
3. Add New Hardware Wizard dialog box will display on
screen. Choose Browse for driver folder (Ex:
D:\Driver\WinMe). Click Avanti.
4. Windows ME will copy the files onto your hard disk, click
Fine.
5. It displays Add New Hardware Wizard dialog box shown
on your screen for a few seconds with the identifier name
(Modem Device) of your modem.
6. Choose Specify the location of the driver. Click Avanti.
7. Add New Hardware Wizard dialog box will display on
screen. Choose Browse for driver folder (Ex:
D:\Driver\WinMe). Click Avanti.
8. Windows ME will copy the files onto your hard disk, click
Fine.
6 Setting Up Your Modem for Windows
2000
1. Turn on your computer. As the Windows 2000 operating
system boots up, it displays a Found New Hardware Wizard
dialog box shown on your screen.
2. Click Avanti, then a new dialog box will show on the
screen.
3. In the new dialog box, you have two choices to install a
driver. The default choice is search for the best driver for your
device and click Avanti.
4. Choose Specify a location, then click Avanti.
5. Insert the driver CD into the CD-ROM device. Click
Browser and choose the CD-ROM Location (Ex:
D\Driver\Win2000).Windows 2000 will copy the files onto
your hard disk. Click Continua and after Fine.
7 Setting Up Your Modem for Windows
NT
1. Turn on your computer. As the Windows NT operating
system boots up, and choose Driver CD (Ex:
D:\Driver\NT4\installer.exe). Double click installer icon.
2. It displays Modem Board Installation Wizard dialog box
shown on your screen, and click SI.
3. Window NT4.0 will copy the files onto your hard disk.
Click OK.
8 Setting Up Your Modem for Windows
XP
1. Turn on your computer. As the Windows XP operating
system boots up, it displays a Found New Hardware Wizard
dialog box shown on your screen.
2. In the new dialog box, you have two choices to install a
driver. Choose The Install from a list or specific location
(Advanced) Then click Avanti..
3. Choose Lnclude this location in the search .
4. Insert the driver CD into the CD-ROM device. Click
Browser and choose the CD-ROM Location (Ex:
D\Driver\WinXP).
5. Windows XP will copy the files onto your hard disk. Click
Continua and after Fine.
9 Need More Information
If you need more information about the modem, refer to the
detailed user manual on the CD.
If you have any other questions you can contact the Atlantis
Land company directly (02/93907634 from the monday to the
friday from the 9:00 at 13:00 o'clock and from the 14:00 at
18:00 o'clock or through mail: info@atlantisland.it
tecnici@atlantisland.it
)
or
Loading...