Atlantis Land AO2-F5P User Manual

Package Contents







One 5/8-Port 10/100M Ethernet Switch
One AC Power Adapter
One Quick Installation Guide

Congratulations on your purchase of the 5(8)-Port

10/100M Mini Switch. This switch integrates 100Mbps

Fast Ethernet and 10Mbps Ethernet network capabilities

in a highly flexible mini package.

A02-F5(8)P_GE01

Ports 1-5(8) At the rear site of the Switch, ports 1-5(8)

are where you will connect your
Computers to the Switch

Power At the left site of the Switch, the power

port is where you will connect the AC
power adapter. Be sure to only use the AC
power adapter that came with the Switch.

The 5 UTP/STP ports support automatic MDI/MDIX
crossover detection function gives
true ‘plug and play’ capability,
with the Auto-MDI function, you
just need to plug-in the network
cable to the switch directly and no
need to care if the end node is NIC
(Network Interface Card) or switches and hubs.

Connect the Switch’s AC power adapter to the Switch’s
Power port. Plug the other end of the
adapter into an AC outlet. When
connected the AC power adapter to the
switch’s Power port and AC outlet will
immediately power on this Switch.

When the Switch installation was completed, check on the
LED indicators for the status.

POWER This indicator lights green when the Switch

is receiving power.

Link/ACT This indicator light green when the port is

connected to a station, if the indicator
blinking will be transmitting or received
data on the network.

Standards IEEE 802.3 10BASE-T

IEEE 802.3u 100BASE-TX

IEEE 802.3x Full-duplex flow control

Ports 5/8 x UTP/STP Auto-MDIX ports
Transfer Rate Ethernet 10Mbps/20Mbps
Fast Ethernet 100Mbps/200Mbps
Performance Non-blocking full wire speed

Power 7.5VDC/1A
EMI FCC Class B/CE Mark B/VCCI-B