Atlantic Technology 370IN-SRTHX User Manual

370 IN-SR THX Certified

On-Wall/In-Wall Dipole Surround Speaker

Instruction Manual

Atlantic Technology

NNOVATIVE

343 Vanderbilt Avenue Norwood, MA 02062 (781) 762-6300 www.atlantictechnology.com

OME

HEATER

Models 4.5 LR, 4.5 C, and 4.5 SR

370 IN-SR

THX Certified On-Wall/In-Wall Dipole Surround Speaker

Thank you for choosing Atlantic Technology home theater products. Your new speaker system is precision crafted to give you years of enjoyable, trouble free service. This manual covers the Atlantic Technology 370 IN-SR Dipole On-wall/In-wall Surround speaker. This unique speaker has been optimized for use with any multi-channel sound format including Dolby Surround Dolby Digital 5.1

The Model 370 IN-SR Surround Speaker is intended for use in audio/video sound systems with dedicated surround channel speakers. Each speaker has two 5-1/4" CCMG (Coated Composite Molded Graphite) woofers, as well as two 3/4" fabric dome tweeters which are angled and phased to produce ambience without localization. Its wide bandwidth and unique construction makes it especially suitable for Dolby Digital and DTS applications. Please note that there is a dedicated LEFT and RIGHT model 370 IN-SR. This is clearly marked on the back of each speaker.

Note: The 370 IN-SR is not intended for use as a regular right and left front channel stereo speaker or satellite. Its spatial performance characteristics are simply not appropriate for this purpose. This speaker will work with any number of home theater systems including, but not limited to, Atlantic Technology Systems 450 THX, 370 THX, 270, and 4.5. As a THX certified Dipole surround the 370 IN-SR may be used with any THX certified or non-THX certified system. Although the speakers in Atlantic Technology Systems are acoustically and cosmetically matched to each other for best results, they may also be used with a wide variety of speakers from other manufacturers with satisfying results.

and DTS®.

, Dolby Pro-Logic®,

Connecting Your System

We recommend that you connect your speakers with high quality dual conductor stranded wire of 18 gauge or larger, for lengths up to 25 feet. Use 16 gauge dual conductor or larger for longer runs of wire. Contact your audio/video dealer for specific cable recommendations and further information for special circumstances.

Warning: To prevent risk of electrical shock or damage to your equipment, always switch off the amplifier or receiver when making connections to the speaker.

You can connect your 370 IN-SR speakers by using a variety of audio connectors, or you can:

1. Remove 1/2" of insulation from each wire end.

2. Twist the stranded wire together, keeping the two ends separate.

3. Place the appropriate wire through the appropriate postholes in the connectors. These holes are

revealed when you loosen the connector thumbscrew.

4. Screw down the thumbscrew tightly. We recommend that you check your local electrical codes to make sure that you are not using an

improper connector.

○○○○○○○○○○○○○○○○○○○○○○○○○○

+ 2 hidden pages