MISSION END TABLE
ASSEMBLY INSTRUCTIONS
Before assembling your end table, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726
READY
TO
ASSEMBLE
Adult assemblyAdult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Flat washer - 4 pcs Wooden dowel 3/8 X 1 1/4” - 4 pcs
A E
Allen wrench - 1 pc
C
JCB M8 - 4 pcs Wood screw - 8 pcs
B
Spare - 1 pc
Wooden dowel 1/4” X 1 1/4” - 4 pcs
D
Spare - 1 pc
PARTS LIST
01
TOP PANEL 1 PC
02
LEG
03
SIDE PANEL
04
LOWER SHELF
01
4 PCS
2 PCS
1 PC
04
Spare - 1 pc
F
Spare - 2 pcs
03
02
03
Page 1 of 3
MISSION END TABLE
Step 1
02
Attach the legs (02) to the top panel (01) using flat washers (A) and JCB (B), tighten
with Allen wrench (C), as shown below.
02
02
A
02
02
01
A
B
A
B
B
Adult assemblyAdult assembly
STEP 2 STEP 3
Install wooden dowels (D) and (E) into the
locator holes on (03) and (04) as shown below.
03
Attach first side panel (03) to end table
aligning the dowels with the holes in the
apron. Be sure the panel is centered before
tightening the wood screw (F).
D
E
04
E
D
E
03
D
D
note: panel in center
F
F
03
F
Adult assemblyAdult assembly
Page 2 of 3