Page 1
MISSION DESK WITH DRAWER
Hexagon wrench
ASSEMBLY INSTRUCTIONS
Before assembling your Desk, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at customerservice@atlanticfurniture.com or 1-800-955-3726
READY
TO
ASSEMBLE
Adult assembly
Adult assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
Flat washer - 8 pcs Wooden dowel - 4 pcs
A D
B E
Spare - 2 pcs
Hexagon wrench - 1 pc
Hexagon nut - 8 pcs Wood screw - 4 pcs
Spare - 2 pcs
C
Spare - 1 pc
Spare - 1 pc
PARTS LIST
01
TOP PANEL WITH DRAWER 1 PC
02
LEG
03
SIDE PANEL
01
4 PCS
2 PCS
02
03
Page 1 of 3
Page 2
MISSION DESK WITH DRAWER
Step 1
Attach the legs (02) to the top panel (01) as shown below using flat washers (A)
and hexagon nuts (B), tighten with hexagon wrench (C).
02
A
A
B
B
02
A
02
B
01
02
B
02
A
Adult assemblyAdult assembly
A B
Flat washer Hexagon nut
Page 2 of 3
Page 3
MISSION DESK WITH DRAWER
Step 2
Step 3
Install wooden dowels (D) into the locator holes on (03) as shown below.
Repeat with the other panel.
03
Adult assemblyAdult assembly
D
D
D
Wooden dowel
E
Wood screw
Attach side panels (03) to desk aligning the dowels (D) with the holes in the apron.
Be sure the panel is centered before
tightening the wood screw (E).
E
03
E
D
03
D
note: panel in center
E
Congratulations!
Your desk is now ready for use.
We recommend that you recheck that all screws are tight,
and that all parts are secure before use and periodically to ensure lasting Safety.
Page 3 of 3
Loading...