Atlantic Furniture AH10114 Assembly Guide
SHAKER PRINTER STAND CHARGING STATION
ASSEMBLY INSTRUCTIONS
Before assembling your Printer stand, please read through these
instructions carefully and familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST
Hexagon Wrench
READY
TO
ASSEMBLE
Adult Assembly
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE HEXAGON NUT, OR WASHER ARE DAMAGED DURING ASSEMBLY.
Flat washer - 8 pcs
A
Spare - 2 pcs
Hexagon nut - 8 pcs
B
Spare - 2 pcs
Hexagon wrench - 1 pc
C
PARTS LIST
01
TOP PANEL 1 PC
02
LEG
4 PCS
01
SHAKER PRINTER STAND CHARGING STATION
02
Page 1 of 2
STEP 1
Attach the legs (02) to the top panel (01) using flat washers (A) and hexagon nuts (B),
tighten with hexagon wrench (C), as shown below.
02
A
A
02
B
B
02
Adult Assembly
02
02
A
Congratulations!
Your Printer stand is now ready for use.
To ensure lasting safety, we recommend that you periodically check
that all screws are tight and all parts are secure.
SHAKER PRINTER STAND CHARGING STATION
B
01
A
B
Page 2 of 2
Loading...