Atlantic Furniture AR8926112, AR8012119, AR8022119, AR8042112, AR8052112 Assembly Guide
...
URBAN LIFESTYLE BED DRAWER
ASSEMBLY INSTRUCTIONS
Before assembling your bed drawer, please read through these
instructions carefully, familiarize yourself with the different parts.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com or 1-800-955-3726
Allen wrench
NOTE : WE INCLUDE SPARE HARDWARE IN CASE DAMAGE OCCURS DURING ASSEMBLY.
HARDWARE
JCB M6 X 1 1/8”( 30mm ) - 16 pcs
A B
Allen wrench - 1 pc
Spare - 2 pcs
E
READY
Adult assembly
Spare - 1 pc
PARTS LIST
01
HARDWARE 1 BOX
02
DRAWER FACE
03
DRAWER SIDE
04
DRAWER BACK
05
DRAWER BOTTOM
Step 1
Lay the drawer face (02) on smooth, flat surface so the groove is facing upwards. Fit the drawer
side (03) to drawer face (02), Use JCB M6 X 1” (A), align groove inside panel with groove in
drawer face. Tighten with Allen wrench (B).
A
2 PCS
4 PCS
2 PCS
2 PCS
03
03
02
04
05
01
03
Adult assembly
A
PO :
02
03
JCB M6 X 1 1/8”
B
Allen wrench
A
Page 1 of 2
URBAN LIFESTYLE BED DRAWER
Step 2 Step 3
Guide the drawer bottom (05) in carefully so
that it won’t jump out of its grooves. Be sure it
fits fully into its groove at the bottom
(in the drawer face) before fitting the drawer back.
A
05
Adult assembly
A
JCB M6 X 1 1/8”
B
Allen wrench
Attach drawer back (04) to bed drawer
assembly as shown. Use JCB M6 X 1”(A).
Tighten with Allen wrench (B).
04
A
Congratulations!
Your Urban lifestyle bed drawers are now ready for use.
We recommend that you recheck that all screws are tight
Adult assembly
Page 2 of 2
Loading...