Atlantic Furniture AB55554, AB55544, AB55552, AB55542, AB55254 Assembly Guide
...
Size of Mattress and Foundation
The length and width of the upper and lower bunk mattress and foundation are as follows :
Width
37 ½”- 38 ½”
52”- 53”
Thickness
9 ½” max
9 ½” max
Twin
Full
LengthSize
74”- 75”
74”- 75”
You must use only this size mattress.
Ensure thickness of upper and lower mattress and foundation combined does not exceed 9 ½”
and that the mattress is at least 5” below upper edge of guardrails.
This Bunk Bed uses a slat kit for mattress foundation.
Replacement Parts
Replacement parts, including additional guardrails, may be obtained from any
Atlantic Furniture dealer
SAFETY WARNINGS
! !
( 1 )
Follow the information on the warnings appearing on the upper bunk end structure
and on the carton. Do not remove warning label from bed.
( 2 )
( 3 )
( 4 )
( 5 )
( 6 )
( 7 )
( 8 )
( 9 )
(10)
(11)
(12)
(13)
Always use the recommended size mattresses or mattress support, or both,
to help prevent the likehood of entrapment or falls.
Surface of mattress must be at least 5 in. (127mm) below the upper edge of guardrails.
Do not allow children under 6 years of age to use the upper bunk.
Periodically check and ensure that the guardrail, ladder, and other component are
in their proper position, free from damage, and that all connectors are tight.
Do not allow horseplay on or under the bed and prohibit jumping on the bed.
Always use ladder for entering or leaving upper bunk.
Do not use substitute parts. Contact the manufacturer or dealer for replacement parts.
Use of a night light may provide added safety precaution for a child using the upper bunk.
Always use guardrails on both long sides of the upper bunk. If the bunk bed will be placed
next to the wall, the guardrail that runs the full length of the bed should be placed against
the wall to prevent entrapment between the bed and the wall.
The use of water or sleep flotation mattresses is prohibited.
STRANGULATION HAZARD : Never attach or hang items to any part of the bunk bed
that are not designed for use with the bed; for example, but not limited to, hooks, belts
and jump ropes.
Keep these instructions for future reference.
BUNK SAFETY WARNING
Page 1 of 8
READY
COLUMBIA BUNK BED
ASSEMBLY INSTRUCTIONS
(TWIN - TWIN) (TWIN - FULL) (FULL - FULL)
Thank you for choosing Atlantic’s Bunk Bed.
This practical design offers the utmost in versatility.
Before assembling your Columbia bunk bed, please read through these
instructions carefully. Familiarize yourself with the different parts.
Please note that you will require a Phillips head screwdriver and an Allen wrench.
ATTENTION! If you receive a damaged or defective item,
please contact Atlantic Furniture at service@atlanticfurniture.com 1-800-955-3726 / M-F 9:00-5:00 EST
Adult Assembly
Allen wrench
Customer Supplied
TWIN OVER FULL SHOWN
Phillips head
screwdriver
GUARDRAIL CAN BE SET UP AT EITHER
END OF THE BUNK BED
TWIN / TWIN FULL / FULL
HARDWARE
NOTE: WE INCLUDE SPARE HARDWARE IN CASE THE ALLEN WRENCH, JCB, BARREL NUT, WOOD SCREW OR WOOD BUTTON ARE DAMAGED DURING ASSEMBLY.
JCB M6 X 3 ½”(90mm) - 16 pcs
A
Spare - 2 pcs
1 ” Wood Screw - 4 pcs
E
D
Spare - 2 pcs
JCB M6 X 2”(50mm) - 4 pcs
B
Barrel Nut - 20 pcs
C
COLUMBIA BUNK BED
Spare - 2 pcs
Spare - 2 pcs
Metal Pins - 4 pcs
E
E
E
Wood Button - 8 pcs
F
Allen wrench - 1 pc
G
E
Spare - 1 pc
Spare - 1 pc
Page 2 of 8
PARTS LIST
07
03
06
02
08
08
08
05
10
09
TWIN OVER FULL SHOWN
04
06
07
02
03
01
01
HARDWARE
02
UPPER PANEL
03
LOWER PANEL
04
FULL GUARD RAIL
05
3/4 GUARD RAIL
06
LEFT END CAPS
07
RIGHT END CAPS
08
LONG RAIL
08
1 BOX
1 BOX
1 BOX
09
TWIN SLAT KIT
OR
FULL UPPER BUNK SLAT KIT
10
FULL LOWER BUNK SLAT KIT
OR
TWIN LOWER BUNK SLAT KIT
COLUMBIA BUNK BED
1 BOX
1 BOX
1 BOX
1 BOX
Page 3 of 8
Loading...