Atlantic RHCRU User Manual
Product Specifications
Products:
Model: RHCRU
Code:
Clean Rain Ultra
DDCR99
TM
The Ultimate All In One Rainwater
Filtration and Collection System
Product Description
The Premium Choice for Easy, High Quality Rainwater
Clean Rain Ultra is the ultimate all in one rainwater filtration and collection system. A unique
sleek cover and cap provides a stylish, integrated look. The advanced filtration technology
(Hydro Activated Filtration
first flush diversion system automatically activates when water is detected and diverts the first
flush of rainwater which contains contaminants from the roof to stormwater. Clean Rain
the user to connect multiple outlet hoses to direct water to a pool, garden, rainwater
tanks/cisterns or rain barrels. The Clean Rain
adapt to different installation environments.
TM
) allows the Clean Rain
TM
TM
to shed leaves while the ‘Smart Sense’
TM
body also rotates 180° allowing it to easily
allows
Features and Benefits
• Break through Filtration and First Flush Diverter technology in one easy to install product
offering
• Cutting edge Hydro Activated Filtration
vibrating angled screen to deflect debris off the screen.
• Compact inline First Flush Diverter diverts the first flush of rainwater containing contaminants
from the roof to stormwater – no additional chamber required (Smart Sense
• Minimal maintenance
• A unique sleek cover and cap provides a stylish, integrated look
TM
• The Clean Rain
• Fits standard garden, 1” sump and 1½ “ pool hoses, and 3” pipe
• Multi-fit cap and downspout adaptors – 3” and 4”, 2 x 3” and 3 x 4”
• Easily accessible on/off switch, with a safety overflow to stormwater drain
Body swivels for convenient outlet positioning
TM
technology uses the Leaf Slide and a precisely
TM
technology)
TOLL FREE (866) 506 3047
www.rainharvesting.com
www.atlanticwatergardens.com
Installation
Product Specifications
1. Remove 29.3" of downspout from where the
Clean Rain
TM
is to be situated. Ensure all edges
are clean and smooth.
2. Remove the cap and use snips to remove a
section to fit the downspout.
3. Remove the cover by flexing outwards at the
top.
4. Fit the correct downspout adaptor to the
bottom of the Clean Rain
TM
.
5. Slide the cap up the top section of downspout
and hold temporarily in place.
6. Install the Clean Rain
on the bottom section of downspout.
7. Screw the top of the Clean Rain
TM
by positioning it securely
TM
in position
through the screw slots provided. Ensure
appropriate screws and anchors (if required)
are used.
8. Check the placement of the Vibrating Screen. It
must sit behind and below the front face (refer
figure 1).
9. Insert the Leaf Slide into slot holes (refer figure
2).
10. Re-install the front cover.
11. Slide the cap back down the downspout until it
sits securely on top of the Clean Rain
On/Off
The Clean Rain
this simply flick the switch on the front of the Clean Rain
next rainfall event all water will be diverted to stormwater.
®
can be turned off so that no water is diverted. To do
TM
unit.
®
and in the
31.34
LEFT SIDE VIEW
9.01
8.11
RIGHT SIDE VIEW
20.20
a. Cap
FRONT VIEW
Figure 2.
b. Cover
c. On/Off
Switch
d. Breather
e. Adaptor
f. Leaf Slide
g. Screw Slots
h. Vibrating
Screen
i. Outlet
j. Valve
(Smart Sense
ALL DIMENSIONS IN INCHES UNLESS OTHERWISE STATED.
Figure 1.
TM
)
Maintenance
The Clean Rain
functioning optimally.
RAIN HEAD – The leaf slide and vibrating screen can both be removed when the cap and cover are off by lifting up
and out. If cleaning is required simply hose or brush off any debris. Replace as per figure 1 and 2.
OUTLET – The outlet has an internal mosquito barrier that prevents any mosquitoes from entering the tank. To clean
simply remove the outlet by holding the unit in one hand and with a firm pull remove the outlet adaptor. The
mosquito barrier sits within the outlet and can be removed by hand.
FIRST FLUSH – The Smart SenseTM valve may require the occasional clean to remove any build-up of sediment. To
clean remove the Clean Rain
performance the washers based at the bottom of the Smart Sense
12 to 24 months.
DISCLAIMER This product specification is not a complete guide to product usage. Further information is available from Rain Harvesting Pty Ltd and from the Installation and
Operating Instructions . This specification sheet must be read in conjunction with the Installation and Operating Instructions and all applicable statutory requirement. Product
specifications may change without notice. © Rain Harvesting Pty Ltd
TM
is mostly self-cleaning, however it may require occasional maintenance in order to keep it
TM
from the wall and take the bottom adaptor off the unit. To maintain optimum
TM
valve should be replaced approximately every
TOLL FREE (866) 506 3047
www.rainharvesting.com
www.atlanticwatergardens.com
Loading...