Page 1
THIS INSTRUCTION BOOKLET CONTAINS
IMPORTANT SAFETY INFORMATION, PLEASE
READ AND KEEP FOR FUTURE REFERENCE.
Item #67035439
Nero TV Stand with Mount
Fits audio and video equipment. If parts are missing, DO NOT return to the store.
To order missing / replacement parts or assembly assistance please
call 1-800-747-2660 or mail customer_relations@atlantic-inc.com.
- 1 -
Page 2
- 2 -
Assembly Tips:
Become familiar with the instructions and all parts.
Make sure that all parts are in the box and in good condition.
Assemble the product on the open flat carton or a rug to protect the product and
your floor.
Some heavy products need a second person to assist in the assembly.
.
Use of power tools is not recommended.
Caution:
Never let children climb on furniture or play with furniture.
Do not sit or stand on furniture.
Do not overload shelves.
Use care when moving furniture. Furniture can tip over if moved improperly.
Only move furniture when it is empty of TV or other electronic components.
Care Instructions:
Use electrostatic dust cloths to clean furniture.
Do not set hot or cold containers directly on the furniture surface.
!
It is strongly recommended that at least two people carry out the assembly.
Do not place a TV that is heavier than the recommended load rating on the
furniture surface.
Do not install on sloping surface.
Assemble the product close to a wall.
With each step, first insert and hand-tighten all bolts and screws by hand. After ALL
BOLTS are slightly screwed in, fully tighten bolts with Phillips screwdriver in sequential
pattern (clockwise or counter clockwise).
Improper handling can result in cuts and lacerations.
Page 3
Components parts list
Qty
A
1
B
C
D
E
F
G
H
1
1
1
1
- 3 -
2
2
2
Item
I
J
K
L
M
O
P
Q
R
MAX 68kg
MAX 27kg
Components parts list
Qty
18
4
N
4
6
1
6
1
1
1
18
Item
M6x35
M6x15
M8x30
M8x45
M8x15
Tools needed / not included:
Phillips screwdriver
Page 4
1
Tools needed:
L
R
E
F
F
C
L x18
1. Attach frames (E&F) to the pillars (B&C) with screws (L).
B
- 4 -
Page 5
Tools needed:
2
O
O x 6
R
D
D
E
F
F
2. Fasten pillars (D) to the frames (E&F) with screws (J)
- 5 -
Page 6
3
Tools needed:
P
R
A
3. Attach back panel (A) to the unit with screws (P).
- 6 -
P x6
Page 7
Tools needed:
4
M8x15
NQ
R
I
N x4
Q x18
4. Attach holder (I) to panel (A) with screws (N), and insert Pads (Q) into the
frames(E&F).
- 7 -
Page 8
5
5. Place glass (G&H) on the pads.
G
H
H
Note: Handle items with glass with extra care. Use eye and hand protection.
Improper handling can result in cuts or lacerations.
- 8 -
Page 9
6
J
6-Fasten two TV mounting barackets on the back panel
of the TV. Detail assembly instructions refer to next pages.
- 9 -
K
Page 10
Step 6
PAY EXTRA CARE AND ATTENTION TO THIS STEP. MAKE SURE THE APPROPRIATE
MOUNTING HARDWARE IS BEING USED PROPERLY.
1. Select correct Mounting Hardware according to the screw hole size on your TV, discard any remaining Machine Screws or Spacers.
2. Carefully lay your Plasma/Flat Panel TV on its Face on a non-abrasivesurface, making sure to lay padding undermeath it so as not to damage the
screen.
3. Place left Mounting Rail and Right Mounting Rail in the appropriate position, making sure CENTERED on the back of the TV and LEVEL with one
another.
MOUNTING HARDWARE LIST
HARDWARE
IDENTIFICATION
U1
U2
U3
V1
V2
V3
W3
W2
W1
PICTURE
SIZE
(mm)
T1
T2
T3
4 x 15
4 x 35
4 x 54
5 x 54
6 x 54
8 x 15
8 x 35
8 x 54
5 x 35
5 x 15
6 x 15
6 x 35
HEAD DIAMETER
(mm)
8
8
8
8
8
8
10
10
10
14
14
14
- 10 -
Ø8
Ø6
X
Ø5
Ø4
Page 11
For Flat Back TV
6
X
X
X
X
X
Ø4 Ø5
(T1~T3 Screws) (U1~U3 Screws)
X
Ø6 Ø8
(V1~V3 Screws) (W1~W3 Screws)
Insert Machine Screws into the appropriate holes located on (X) Dual-Hole Washers (see
Mounting Hardware list), next into left Mounting Bracket (J) and Right Mounting Bracket
(K), and then into TV.
X
X
NOTE:The position of the Mounting Brackets and Hardware will be determined by
the type of TV that you have. These diagrams are not designed to show the
exact positioning; they are only to be used as a guide.
SECURE MACHINE SCREWS FULLY, BUT DO NOT OVER-TIGHTEN.
- 11 -
Page 12
Tools needed / not included:
7
M6x35
M
M
Phillips screwdriver
7-After mounting the brackets (J & K) to TV, hang TV onto folder (I),
then fasten screws (M).
- 12 -
Page 13
Max. 100 lbs
Max. 100 lbs
Max. 65 lbs
Max. 65 lbs
Product Warranty: Atlantic Inc., warrants to the original purchaser that its
products are free from defect in materials or workmanship. If after inspection,
we find that the product was defective in materials or workmanship, we shall
repair or replace the product at our discretion. This warranty does not cover
accidental damage, misuse, improper care or alteration and excludes claims
for incidental or consequential loss. This limited warranty applies to product
purchased in the U.S. and Canada.
Keep this Instruction Manual for future reference.
Keep your original proof of purchase (store receipt).
If parts are missing, DO NOT return to the store.
To order missing / replacement parts or for assembly assistance please
contact customer_relations@atlantic-inc.com.
Or call 1-800-747-2660 M-F, 8am-5pm, P.S.T.
- 13 -
8
U.S. and other foreign patents pending /
Patentes de los EUA y países extranjeros en trámite /
Brevets en cours pour les États-Unis et autres pays /
U.S. und andere ausländische Patente sind hängig
All rights reserved / Derechos Reservados /
Tous droits réservés / Alle Rechte vorbehalten
Made in China / Hecho en China /
Fabriqué en Chine / Hergestellt in China
www.atlantic-inc.com
R1.0 080305 #67035439
Loading...