ATI Technologies V3100 - Firegl Rohs Pcie 128MB, V3200 - 100-505084 FireGL 128MB DDR SDRAM PCI Express x16 Graphics Card, FireGL V3200, FireGL V3100 User Manual

TM

FireGL
FireGL

User’s Guide

V3200

TM

V3100

137-50049-20

ii

Copyright © 2004, ATI Technologies Inc. All rights reserved.

ATI and ATI product and product feature names are trademarks and/or registered trademarks of ATI
Technologies Inc. All other company and/or product names are trademarks and/or registered
trademarks of their respective owners. Features, performance and specifications are subject to change
without notice. Product may not be exactly as shown in diagrams.

Reproduction of this manual, or parts thereof, in any form, without the express written permission of
ATI Technologies Inc. is strictly prohibited.

Disclaimer

While every precaution has been taken in the preparation of this document, ATI Technologies Inc.
assumes no liability with respect to the operation or use of ATI hardware, software or other products
and documentation described herein, for any act or omission of ATI concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory
profits, or for punitive, incidental or consequential damages in connection with the furnishing,
performance, or use of the ATI hardware, software, or other products and documentation provided
herein.

ATI Technologies Inc. reserves the right to make changes without further notice to a product or system
described herein to improve reliability, function or design. With respect to ATI products which this
document relates, ATI disclaims all express or implied warranties regarding such products, including
but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and non­infringement.

Documentation Updates

ATI is constantly improving its product and associated documentation. To maximize the value of your
ATI product, you should ensure that you have the latest documentation. ATI’s documentation contains
helpful installation/configuration tips and other valuable feature information.

iii

L

IMPORTANT SAFETY INSTRUCTIONS

• Read Instructions - All the safety and operating instructions should

be read before the product is operated.

• Retain Instructions - The safety and operating instructions should

be retained for future reference.

• Heed Warnings - All warnings on the product and the operating

instructions should be adhered to.

• Compatibility - This option card is for use only with IBM AT or

compatible UL Listed personal computers that have Installation
Instructions detailing user installation of card cage accessories.

• Grounding - For continued protection against risk of electric shock

and fire, this accessory should be installed only in products equipped
with a three-wire grounding plug, a plug having a third (grounding)
pin. This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace the obsolete outlet. Do not defeat
the safety purpose of the grounding-type plug.

• Secure Attachment

tightened as to provide continuous bonding between the option card
and the PC chassis.

• Lightning - For added protection for this product during a lightning

storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet, and disconnect the antenna or
cable system. This will prevent damage to the product due to
lightning and power-line surges.

• Power Lines - An outside antenna system should not be located in

the vicinity of overhead power lines or other light or power circuits, or
where it can fall into such power lines or circuits.

• Antenna Installation - When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines
or circuits, as contact with them may be fatal.

- All card securement pins shall be completely

iv

Table of Contents

Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

System Requirements 1
Before You Begin 2

Record Your Serial and Part Numbers 2
Uninstall Previous Graphics Card Drivers 3

Installing Hardware . . . . . . . . . . . . . . . . . . . . . . . . . 5

Quick Installation 5
Detailed Installation 5
Turn off the computer, monitor, and other peripheral devices.6

Connecting Display Devices 6
Turning on the System 10

v

Installing Software. . . . . . . . . . . . . . . . . . . . . . . . . 11

HYDRAVISION™ Multi-monitor Management 11
Installing Drivers and Software in Windows® 11

Software Installation Prerequisites 11
Monitor Configuration 13
Reinstalling Drivers 14

Display Properties . . . . . . . . . . . . . . . . . . . . . . . . . 15

ATI Displays Tab 15

Dynamic Display Reassignment 17
ATI Color Tab 17

Hotkeys 20
ATI Options Tab 22
ATI Configuration Tab 23
ATI Advanced Settings Tab 25

Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

Troubleshooting 29

General Problems 30
Customer Care 32

Disclaimer 34
Warranty Information 34

Hardware Warranty Service Statement 34

vi

Warranty Service 34
Limitations 35

Getting Additional Accessories 35
Compliance Information 36

FCC Compliance Information 36
Industry Canada Compliance Statement 36
CE Compliance Information 37
Informations de conformité de la CE 37
Electrical Safety 37
VCCI Class B ITE Compliance Information 37
MIC Certification Information 38
BSMI Certification Information 38

System Requirements 1

CHAPTER 1:

Getting Started

Your ATI FireGL™ card is an advanced workstation 3D graphics card
based on a high-bandwidth, parallel pipeline geometry and rendering
architecture. The card delivers workstation-class performance to designers,
engineers, and animators, and runs the latest OpenGL® and Microsoft®
DirectX® applications.

Features of your FireGL™ workstation graphics card include:

• Real-time photo-realistic rendering and animation.

• Stable and reliable software support for Windows® and Linux®
platforms.

• Optimized and certified for professional workstation applications.

• SMARTSHADER™ technology for creating complex visual
effects.

• SMOOTHVISION™ technology for advanced full-scene anti­aliasing.

• HYPER Z™ III technology to for efficient Z-buffer bandwidth
consumption.

System Requirements

Make sure you meet the following system requirements before installing
your FireGL™ card.

Hardware • Intel® Pentium® 4/Xeon®; AMD Athlon® 64/K7/XP or

compatible.

• 128 MB of system memory; 256 MB or more for best
performance.

• Motherboard with available X16 lane PCI Express slot
and correct chipset driver.

• CD-ROM drive (required for installation software).

• 350 watt or greater power supply (recommended).

2 Before You Begin

Operating
System

Monitor • High-resolution MultiSync or multi-frequency monitors

• Windows® 2000 with Service Pack 1 (or higher).

• Windows® XP Home or Pro with Service Pack 1 (or
higher).

• Linux® XFree86 4.X.0.

or other VGA monitors.

• Digital flat-panel (DFP) displays or digital CRT
displays.

Before You Begin

Before you begin installing your FireGL™ product, please do the
following.

Record Your Serial and Part Numbers

The serial number and 102 part number on the graphics card are required
for registration. They are located on a sticker on the back of the card.

Write these numbers down before installing your new ATI product.

Serial and Part Numbers

X

Y

Serial number (S/N)

102 part number (P/N)

Before You Begin 3

Uninstall Previous Graphics Card Drivers

To ensure the successful installation of your new FireGL™ card, you must
uninstall the drivers for the existing graphics card before removing it from
your computer.

To uninstall previous drivers

With your current graphics card still in your computer:

1 Close all applications that are currently running.

2 Navigate to the Control Panel and select Add/Remove Programs.

3 Select your current graphics card drivers and select Add/Remove.

The wizard will help you remove your current display drivers.

Note: If the previously installed graphics card has any additional
software installed, it should also be removed at this point.

4 Restart your system after the drivers have been removed.

4 Before You Begin

Quick Installation 5

CHAPTER 2:

Installing Hardware

This chapter will guide you through the physical installation of your
FireGL™ card.

Quick Installation

Experienced users and system administrators can follow these brief
instructions for installing the FireGL™ card in the shortest possible time.

To perform a quick installation

1 Uninstall the drivers and software for your old graphics card if you

have not already done so.

Note: If you are using a motherboard containing an on-board
graphics solution and do not intend to use it as part of a multiple
monitor display, disable it.

2 Shut down and disconnect your computer system.

3 Remove any previously installed card.

4 Install your new FireGL™ card.

5 Reassemble and connect your computer system.

6 Install the FireGL™ drivers and configuration software from the ATI

Installation CD-ROM by doing one of the following:

• Run through the automatic

•

Start > Run > X:\ATISETUP.EXE (where X is the drive letter of

your CD-ROM drive).

ATIS ETUP utility; or

Detailed Installation

The following instructions will take you step by step through the
installation of your new FireGL™.

6 Turn off the computer, monitor, and other peripheral devices.

Turn off the computer, monitor, and other
peripheral devices.

7 Unplug the computer’s power cord and disconnect all cables from the

back of your computer.

L

WARNING - Wait approximately 20 seconds after unplugging the

power cord before disconnecting a peripheral or removing a
component from the motherboard to avoid possible damage to the
motherboard.

8 Remove the computer cover.

If necessary, consult your computer’s manual for help in removing the
cover.

L

WARNING - Remember to discharge your body’s static electricity by

touching the power supply or the metal surface of the computer
chassis.

9 Unscrew or unfasten and remove any existing graphics card from

your computer.

Note: If your computer has an on-board graphics capability, you may
need to disable it on the motherboard. For more information, see your
computer documentation.

10 Locate the appropriate slot and, if necessary, remove the metal back-

plate cover.

11 Align your ATI graphics card with the slot and press it in firmly until

the card is fully seated.

12 Screw in or fasten the graphics card securely and replace the

computer cover.

13 Reconnect any cables you have disconnected and plug in the

computer’s power cord.

14 Turn on the monitor and then your computer.

Connecting Display Devices

The following connections are available:

Turn off the computer, monitor, and other peripheral devices. 7

FireGL™ V3200 Baseplate

X

Y

Z

FireGL™ V3100 Baseplate

X

Y

DVI-I Connection

Stereographics Connection

DVI-I Connection

DVI-I Connection

VGA Connection

Your FireGL™ card can connect one or two monitors, either DFP/digital
CRT or analog VGA. The V3200 can also connect a stereographics device.

You will need to use an adapter to connect analog VGA devices to the
DVI-I connections.

8 Turn off the computer, monitor, and other peripheral devices.

Using a VGA-to-DVI-I Adaptor

X

Y

Z

VGA Monitor Connector

VGA-to-DVI-I Adaptor

DVI-I Connection

Make sure all cables are securely connected before turning on your system.

Display Configurations: V3200

The FireGL™ V3200 graphics card provides dual display functionality as
well as stereographics. The following table lists the different ways you can
connect displays to your card.

Display
Configuration

Single DFP
display

Single CRT
display

Connector(s)

Comments

Used

DVI-I connector DFP - digital flat panel display.

VGA connector
with VGA-to-DVI-I
adapter

CRT- cathode ray tube analog display.
The DVI-I connection can support a

CRT display using the VGA-to-DVI-I
adapter.

Stereographics
device

DFP display +
Stereographics

Stereographics One monitor must be connected for

stereographics to function.

DVI-I connector +
Stereographics

Turn off the computer, monitor, and other peripheral devices. 9

Display
Configuration

CRT display +
Stereographics

DFP display +
DFP display

CRT display +
DFP display

CRT display +
CRT display

DFP display +
DFP display +

Stereographics

Connector(s)
Used

VGA connector
with VGA-to-DVI-I
adapter +
Stereographics

DVI-I connector +
DVI-I connector

VGA connector
with VGA-to-DVI-I
adapter +
DVI-I connector

VGA connector
with VGA-to-DVI-I
adapter +
VGA connector
with VGA-to-DVI-I
adapter

DVI-I connector +
DVI-I connector +
Stereographics

Comments

UNSUPPORTED - Stereographics will

not function correctly if two monitors
are enabled. Disable one monitor
before using stereographics.

CRT display +
DFP display +
Stereographics

CRT display +
CRT display +

Stereographics

VGA connector
with VGA-to-DVI-I
adapter +
DVI-I connector +
Stereographics

VGA connector
with VGA-to-DVI-I
adapter +
VGA connector
with VGA-to-DVI-I
adapter +
Stereographics

UNSUPPORTED - Stereographics will
not function correctly if two monitors
are enabled. Disable one monitor
before using stereographics.

UNSUPPORTED - Stereographics will
not function correctly if two monitors
are enabled. Disable one monitor
before using stereographics.