ATI Technologies Radeon X1950 Pro CrossFire Getting Started Manual
Radeon
Getting S tarted Guide
®
X1950 Pro
™
CrossFire
P/N 137-41210-10
ii
Copyright © 2006, ATI Technologies Inc. All rights reserved.
ATI, the ATI logo, and ATI product and product-feature names are trademarks and/or registered
trademarks of ATI Technologies Inc. All other company and/or product names are trademarks and/or
registered trademarks of their respective owners. Feat ures, performance and sp ecifications are subjec t
to change without notice. Product may not be exactly as shown in diagrams.
Reproduction of this manual, or parts t hereof, in any form, without t he express written pe rmission of ATI
Technologies Inc. is strictly prohibited.
Disclaimer
While every precaution has been taken in the preparation of this document, ATI Technologies Inc.
assumes no liability with respect to the opera tion or use of ATI hardware, software or other products
and documentation described herein, for any act or omission of ATI concerning such products or this
documentation, for any interruption of service, loss or interruption of business, loss of anticipatory
profits, or for punitive, incidental or consequential damages in connection with the furnishing,
performance, or use of the ATI hardware, software, or other products and documentation provided
herein.
ATI Technologies Inc. reserves the right to make changes without furth er not ice to a product or system
described herein to improve reliability, function or design. With respect to ATI products which this
document relates, ATI disclaims all express or implied warranties regarding such products, including
but not limited to, the implied warranties of merchantability, fitness for a particular purpose, and noninfringement.
Macrovision
Apparatus Claims of U.S. Patent Nos. 4,631,603; 4,819, 098; 4,907,093; 5,315,448; and 6,516,132.
Licensed for limited viewing uses only.
This product incorporates copyright protect ion technology that is protected by US patents and other
intellectual property rights. Use of this copyright protection technology must be authorized by
Macrovision, and is intended for home and other li mited viewing use s only unless ot herwise authorize d
by Macrovision. Reverse engineering or disassembly is prohibited.
Documentation Updates
ATI is constantly improving its product and associated documentation. To maximize the value of your
ATI product, you should ensure that you have the latest documentation. ATI’s documentation contains
helpful installation/configuration tips and other valuable feature information.
iii
L
IMPORTANT SAFETY INSTRUCTIONS
• Read Instructions - All the safety and operating instructions should
be read before the product is operated.
• Retain Instructions - The safety and operating instructions should be
retained for future reference.
• Heed Warnings - All warnings on the product and the operating
instructions should be adhered to.
• Compatibility - This option card is for use only with IBM AT or
compatible UL Listed personal computers that have Installation
Instructions detailing user installation of card cage accessories.
• Grounding - For continued protection against risk of electric shock
and fire, this accessory should be installed only in products equipped
with a three-wire grounding plug, a plug having a third (grounding) pin.
This plug will only fit into a grounding-type power outlet. This is a
safety feature. If you are unable to insert the plug into the outlet,
contact your electrician to replace the obsolete outlet. Do not defeat
the safety purpose of the grounding-type plug.
• Secure Attachment
tightened as to provide continuous bonding between the option card
and the PC chassis.
• Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet, and disconnect the antenna or
cable system. This will prevent damage to the product due to lightning
and power-line surges.
• Power Lines - An outside antenna system should not be located in
the vicinity of overhead power lines or other light or power circuits, or
where it can fall into such power lines or circuits.
• Antenna Installation - When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines
or circuits, as contact with them may be fatal.
- All card securement pins shall be completely
Note: This graphics card is for use only with compatible UL Listed
personal computers that have Installation Instructions detailing user
installation of card cage accessories.
iv
Table of Contents
Installing CrossFire™ Graphics Cards . . . . . . . . . . 1
Installing the CrossFire™ Bridge Interconnects 3
Display Configurations 4
Installing Software and Drivers . . . . . . . . . . . . . . . 5
Windows® New Hardware Found 5
Installing the Catalyst
™
Software Suite 5
v
Enabling CrossFire™ . . . . . . . . . . . . . . . . . . . . . . . . 7
Launching Catalyst™ Control Center Using the Start Menu 7
Other Quick Launch Access Points 7
Welcome to CrossFire™. . . . . . . . . . . . . . . . . . . . . . 9
CrossFire™ Overview 9
Allowable Radeon
CrossFire
™
Rendering Modes 9
®
X1950 Pro CrossFire™ System Components 9
CrossFire™ FAQ . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Getting Started. . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
System Requirements 18
External Connections 18
Uninstall Previous Graphics Card Drivers 19
vi
Reference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Troubleshooting 21
Product Registration 25
Customer Care 25
Additional Accessories 27
Compliance Information 27
FCC Compliance Information 27
Industry Canada Compliance Statement 28
CE Compliance Information 28
Informations de conformité de la CE 28
CHAPTER 1:
Getting St arted
Congratulations on the purchase of your Radeon® X1950 Pro card. The
CrossFire
new graphics card and associated software, and enable CrossFire
™
Getting Started Guide will help you to successfully install your
™
1
.
2
System Requirements
Hardware
• Intel
®
Pentium
® 4
or AMD Athlon®.
• 512MB of system memory; 1GB or more for best
performance.
• Optical drive for installation software (CD-ROM or
DVD-ROM drive).
• Specialized PCI Express
®
450 watt or greater power
supply recommended. Consult your computer system
manual to ensure the power supply is designed to
accommodate a high-end graphics card with a peak
dissipation above 75 watts.
Operating
System
•Windows
•Windows
•Windows
•Windows
®
XP with Service Pack 2 (SP2).
®
XP Professional x64 Edition.
®
2000.
®
Vista Ready.
Monitor • High-resolution MultiSync or multi-frequency monitors
or any other type of VGA monitor.
• Digital flat-panel (DFP) displays or digital CRT display.
CrossFire™
Compatibility
If you are planning on using this graphics card as part of a
CrossFire
•A CrossFire
Express
(See
™
system, the following is required:
™
certified motherboard with two (2) PCI
®
X16 slots and correct PCIe™ chipset driver.
ati.com/crossfire for a list of CrossFire
™
certified motherboards.)
• A second Radeon
•Two CrossFire
®
X1950 Pro graphics card
™
Bridge Interconnects.
More information on the requirements for each of these
components can be found within the CrossFire
™
FAQ.
External Connections
• DVI-I output.
• 15-pin VGA.
•S-Video.
3
Uninstall Previous Graphics Card Drivers
To ensure the successful installation of your new Radeon® X1950 Pro card,
you must uninstall the drivers for the existing graphics card before removing
it from your computer.
To uninstall previous drivers
With your current graphics card still in your computer:
1 Close all applications that are currently running.
2 Navigate to the Control Panel and select Add/Remove Programs.
3 Select your current graphics card drivers and select Add/Remove. The
wizard will help you remove your current display drivers.
Note: If the previously installed graphics card has any additional
software installed, it should also be removed at this point.
4 Turn off your system and remove the old graphics card.
4
Loading...