ATI Electronics SH5B User Manual

SH5B

Bluetooth

®

Headset

User manual

- 1 -

1. Notice Before Using

Thank you for purchasing the Bluetooth® Headset SH5B. Please read this User's
Manual completely before you use the Headset.
SH5B designed for listening the high quality music wirelessly that based on the
latest Bluetooth® wireless technology. SH5B can be easily connected to a mobile
phone for call conversation and music listening, it is also capable to connect to the
other Bluetooth®-enabled devices like Notebook, iPod etc.
SH5B is compliant with Bluetooth V3.0 specification, supports HSP, HFP, A2DP and
AVRCP profiles. Please make sure your phone or other device supports these
profiles.

2. Specification

Bluetooth specification: V3.0
Operation frequency: 2.402-2.48GHz
Supported profile: HSP, HFP, A2DP,AVRCP
Operation range: Up to 10 meters
Talk time: 6 hours
Play time: 5 hours
Standby time: 240hours
Battery type: 120mAh, 3.7V, Polymer Li-ion Battery
Charge time:2 Hours

- 2 -

3. Package Contents List

Please inspect this package and refer to the package contents list below to verify all
items were included in this package:

1) SH5B Bluetooth® headset(1)

2) USB Charging Cable(1)

3) User's Manual(1)

4. SH5B Bluetooth® Headset Overview

① Volume +
① Answer / Play/ Pause/ Indicator
② Next Tra ck
③ Microphone
④ Charging Port
⑤ Volume -
⑥ Previous Track

LED

5. Battery information

The device is equipped with an integrated lithium-polymer battery. The battery
cannot be replaced. Do not attempt to remove the battery from the device since it
would damage the device. The full performance of a new battery is not achieved

- 3 -

until after two or three complete charging-discharging cycles. The battery can be
charged and discharged several hundred times, but it loses its capacity over time.
Disconnect the SH5B from the power supply as soon as the battery is fully charged,
overcharging would reduce the service life of the battery. A charged battery will lose
its capacity if it is not used on a regular basis.

Important:

Ensure that the battery is fully charged if you do not use the device for a long period
of time. To avoid a complete discharge of the battery, the SH5B should be charged
at least every 3 months.

6. Charging the battery

The SH5B is operated with a rechargeable battery. Charge the battery completely
before its first use. Read the section "Battery information" before starting the
charging process.

1) Connect USB cable to a general USB power supplier.

2) Connect the charger to the correct outlet.

3) When the charger is connected to the headset, the red indicator light will

turn on. Charging the battery fully may take up to 2 hours.

4) When the battery is fully charged, the red indicator light will turn blue.

Disconnect the charger from the headset and the outlet. The headset is
ready to use.

NOTE:

- For first time use, please charge the headset fully.

- 4 -