ATI Electronics G328 Users Manual

EX-02s NEXT GEN

This product is not designed, manufactured, sponsored or endorsed by Sony Computer Entertainment Inc. or any of its divisions. PS3™ is a trademark

of Sony Computer Entertainment Inc. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Gioteck

is under license. Specification & appearance are subject to change without prior notice. Copyright © 2010 GBB Group. All Rights Reserved.

MODEL G328A

BLUETOOTH

®

HEADSET FOR PS3

EXCLUSIVELY DESIGNED FOR GAMING ON PS3

™

™

thank you

Thank you for purchasing the EX-02s Next Gen Bluetooth® Headset from Gioteck. We hope that this product
will go beyond your expectations for a quality accessory. Please read this booklet thoroughly before using the
product and review the PS3™ manual for additional details regarding PS3™ operation. Thank you & enjoy!

features & details

Following hot on the heels of the best selling EX-01, we are proud to bring you the EX-02s Next Gen Bluetooth®
Headset, featuring a state-of-the-art chipset with built-in noise cancelling for optimum voice clarity, coupled
with an incredibly long battery life. Now wearing a sleeker design overall with removable faceplates, so as to
fine-tune your enjoyment online.

precautions

• Use only as intended.

• This is a precision product and
should be handled with care.

• To avoid electrical shock, do
not take the product apart.

• Do not store in areas of

CONTENTS

02 | Contents & Precautions

03 | Features & Details

04 | Setup

06 | Reversing Earhook

08 | Charging

09 | Operation

10 | Troubleshooting

11 | Care & Maintenance

02 | CONTENTS & PRECAUTIONS FEATURES & DETAILS | 03

extreme heat or cold.

• Do not allow product to get
wet or dirty; doing so may
damage the product.

• Do not clean with benzene;
paint thinner, acetone, alcohol,
or other such solvents.

• Contains small parts.
Not suitable for children
under 3 years of age.

warnings

This symbol indicates important
installation, operation or
maintenance instructions. Always
follow these instructions closely.

This symbol is intended to alert
the user to the presence of
potentially harmful or dangerous
substances within the product’s
enclosure. This symbol may also
indicate a procedure that will
void your product warranty.

Recycling is important and will
help to protect our environment
and reduce landfill waste.

This symbol on the product
or in the manual means that
your electronic equipment
should NOT be disposed of in
normal household waste at
the end of its life. It should be
disposed of separately. Please
take it to a collection point
for electrical waste.

01 | Microphone

02 | Speaker

03 | Earhook

04 | LED Feedback

05 | Volume Decrease

06 | Power / Mute / Reconnect

07 | Volume Increase

03

02

04

01

07

06

05

pairing your headset

1. Within the Settings' menu,
press X on Accessory Settings.

4. At the next screen, prepare your
headset (from off) to be paired by
holding down the power button
continuously until the LEDs flash
alternate Blue & Red. When it is
connected the LEDs will flash Blue
every 2 seconds. If not connected,
it will flash blue every 4 seconds.

04 | SETUP SETUP | 05

2. Press X on the icon labelled:
Manage Bluetooth® Device.

3

SECONDS

5. Press X to Start Scanning. Once
the scan is complete, the PS3™
will recognize all Bluetooth®
wireless technology devices
within range.

3. Press X on Yes to register your
Bluetooth® Device.

6. Locate PS3 EX-02s from the list
of available devices and press X.

7. Press X to enter 0000 (four zeros)
as the Pass Key and press X on OK.

10. Scroll down and press X
on Audio Device Settings.

8. You will be taken to a new screen
stating: Register completed.

11. Choose PS3 EX-02s as your input
and output device from the lists.
Press X to confirm your choices.

9. Press twice on your controller
to go back to Accessory Settings.

12. Scroll down and press X on OK.

Your EX-02s Next Gen
Bluetooth® Headset is now
ready to use...enjoy :)