ATI Electronics ATIH300 Users Manual

H300

BEFORE USING YOUR HEADSET

Please read this user's guide to get started, and to make the best use of the headsets
many features.

Product Specification

Bluetooth Specification: Bluetooth Version 2.0 compliant.
Power Level: Class II.
Support Profile: Hands-Free, Headset (Headset role only).
Standby Time: 120 hours.
Talk Time: Up to 5 hours
Operating Range: 10 meters (30 feet).

*Above mentioned standby time and talk time will be different depending on mobile
phone setting and usage environment. The figures above show the average values
tested by laboratory.

1

Your headset overview

The headset contains the following parts:

1.Ear Hook

2.Speaker

3.Charging Socket

4.Volume Down Button

5.Volume Up Button

6.Multi-function Button

7.Indicator Light

8.Microphone

1
2
3
4

5

6

7

8

2

Charging the headset

This device has an internal, nonremovable, rechargeable battery. Do not
attempt to remove the battery from the device as you may damage the device.

1. Connect the charger to the correct outlet.

2. While the charger is connected, the red indicator light is displayed during
charging. If charging does not start, disconnect the charger, plug it in again,
and retry. Charging the battery fully may take up to 2 hours.

3. When the battery is fully charged, the red indicator light turns off.
Disconnect the charger from the headset and the wall outlet.

1. If you hear the low battery warning sound (beep every 5
seconds) and the red indicator light is flashing every 5 seconds,

I

this means the battery needs to be charged.

TNATROPM

2. If you turn the headset on and the ending melody is immediately
played, that also means the battery needs to be charged.

3. The headset is not functional while charging.

3