ARES 2000
USER MANUAL AND
CARE INSTRUCTIONS
32
“Mode“ Button
“Ranging“/”Power” Button
Eyepiece
Battery Compartments
Laser Receiving Objective
Laser Emission Objective
BACK VIEW SIDE VIEW
Startup and Shutdown
1. Remove the battery cap on the bottom and insert a CR23V battery into the battery chamber, having the negative
side facing in, then close the battery cap.
2. Short press button to power on. You should see the
startup display by looking through the eyepiece.
3. Laser Range Finder will automatically power o after
idling for more than 10 seconds.
Rangender Elements
* Short press: Press less than 1 second
* Long press: Hold for 3 seconds
54
Eyepiece LCD Display Menu Operational Flowchart
Battery Indicator;
Aiming Reticle;
Golf Function Sign
Incline Angle, Horizontal Distance, Vertical Distance
Mode Sign;
Distance, Incline Angle, Mode OFF and Auto function Display
Unit: M -- Meter, Y -- Yard.
1. Power ON: Short press to power on. The startup
screen will display the last used mode. After 10 seconds
of no-operation the display will power o automatically.
76
2. Select display mode: While the display is active, long press
button for more than 3 seconds. Press button to
select Golf or Auto mode. Flashing icon indicates selected.
Short press to conrm the item you selected. You will
automatically enter into “M/Y“ selectable display.
3. Select measuring units: Short press to select “M” or
“Y”.
Short press to conrm the item you selected. You will
automatically enter into ranging mode display.
Golf Mode
Yards
Auto Mode
Meters
98
4. Select ranging mode: Short press to select one of the
following ranging modes: Incline Angle, Vertical Distance,
Horizontal Distance, “OFF“ No-Display.
Short press to conrm the item you selected. To con-
rm all changes long press to save and go back to the
ranging display. Set up is now complete.
5. Low battery indication: When the voltage is lower than
2.7V, “LOW BATTERY” sign will appear and blink as below,
the blink interval is 1s, and will blink for 5 seconds and then
power o automatically.
Incline Angle Vertical Distance
Horizontal Distance “OFF“ No-display
Ranging Modes to Choose From
Incline Angle (T) mode displays the incline angle of your posi-
tion to the target.
Horizontal Distance (H) mode displays the angle compensated
distance to the target. This is the primary mode used by most
hunters (Both bow and rie).
1110
THE ATHLON GOLD MEDAL LIFETIME WARRANTY*
Your Athlon product is not only warranted to be free of defects in materials and workmanship for the lifetime of the
product. Athlon will also repair or replace, at no charge to you,
your product if you should damage it through normal use. No
receipt is needed, no registration is required. This is a commitment that Athlon Optics will be the best product you can
buy for your money.
*This warranty does not cover damages caused by deliberate
damage, misuse, theft or maintenance provided by someone
other than the Athlon Authorized Service Department.
Vertical Distance (V) mode displays the vertical distance of
your position to the target.
Scan mode feature displays distance readings quickly as you
pan across a target, landscape or a moving animal.
* Scan mode feature only available in Horizontal Distance
and Vertical Distance ranging modes
TOLL FREE: 1-855-913-5678
CONTACT@ATHLONOPTICS.COM
801 N MEADOWBROOK DR, OLATHE, KS 66062
Loading...