PRODUCT DATASHEET
ASEDrive PAC
The ASEDrive PAC Sector Readers/Writers family are fully-featured smartcard proximity
readers/writers, ideal for highly secured facilities as well as other facilities that wish to utilize access
control , intrusion, detection or time and attendance applications.
ASEDrive PAC Contactless
CPU Smartcard Reader
The ASEDrive PAC introduces patented, industry
first technology encased in a anti-vandal body, thus
combining smart card technology with anti-vandal
protection.
General Description
Programming of the reader is done by firmware
upgrade, using Athena Smart Card Programmer.
The reader scans information stored within a
smartcard, sends the data to a connected access
control system, and allows the integrator to set
secret keys for different sectors on the card. This
established a unique network with proprietary
cards, where no card can possibly have the same
ID on the same location and with the same reader
key.
The readers meet IP65 and are suitable for both
indoor and outdoor use. The interface is a 10-wire
pigtail (including Wiegand, USB & RS232) that
allows you to connect the unit to a control panel.
Main Features
• Advanced, secure, multi-application
functionality for intelligent applications.
• Easy to deploy in the field with the
configuration card (Master card) for secure
sector reading of data from the sectors.
• Configurable multi output format, supports
various Wiegand formats and many more.
• Multiple keypad transmission formats
(optional)
• Microsoft® Windows Compatible software for
Master and User Card configuration.
Advanced Features
• Reads ISO14443 A/B & Mifare Standard
cards.
• Dedicated LED and buzzer control inputs.
• Optical tamper sensor for case and wall
tamper detection.
• Reads dedicated customer’s sector or
serial number.
• Internal Secure Access Module (SAM)
socket (optional).
• Outdoor use and weather-resistance (IP65)
• 3 years HW warranty
System Components
The Readers are compatible with USB desktop
card programmer and its associated software.
Wiegand 26
-
bit
, Clock & Data, Wiegand 32 bit,
65
mm x
55
mm x
27mm
Technical Specification
The readers are compatible with a variety of
industry controllers.
Operating Voltage Range:
Standby Input Current:
Maximum Input Current:
Tamper Output:
Inputs:
Indicators:
Output Formats:
Built-In Proximity Reader:
Max. Proximity read range:
Operating Environment:
Operating Temperature
Operating Humidity:
Dimensions (H x W x D):
Weight:
ELECTRICAL CHARACTERISTICS ASEDrive PAC
OPERATIONAL CHATACTERISTICS
Programmable LED Control / Buzzer control Input, N.O, Dry Contact
ENVIRONMENTAL CHARATERISTICS
MECHANICAL CHARATERISTICS
.
5-16 VDC
110mA
150mA
Open Controller, active low, max sink current 30Ma
2 LED indicators
Wiegand 37 bit, RS232,USB
Operating Frequency: 13.56MHz
Compatible ISO 14443 A/B
45mm (1.772 ``)
Water resistant, suitable for outdoor use (meets IP65)
-30ºC to 60ºC
0% to 95% (Non-Condensing)
2.56 x 2.16 x 1.06 inch
250g (0.55 lbs.)
Athena ASEDrive IIIe PAC (27082012)
PRODUCT DATASHEET
IMPORTANT FCC Part 15
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
FCC WARNING
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
NOTE: THE MANUFACTURER IS NOT RESPONSIBLE FOR ANY RADIO OR TV INTERFERENCE CAUSED BY UNAUTHORIZED
MODIFICATIONS TO THIS EQUIPMENT. SUCH MODIFICATIONS COULD VOID THE USER'S AUTHORITY TO OPERATE THE
EQUIPMENT.
Loading...