ATEN Technology IOGEAR GUH326 Users Manual

Color
CMYK
75% (40, 40, 30, 100)
50, 0, 100, 0
Quick Start Guide
6 Port SuperSpeed USB 3.0 Hub
GUH326
PART NO. Q1276-a
Package Contents
1 X 6 Port SuperSpeed USB 3.0 Hub 1 X USB 3.0 Male A to Male Mini B Cable 1 X 5V5A AC Adapter 1 X Quick Start Guide 1 X Warranty Card
Requirements
• Windows Vista®, Windows® 7, Windows® 8/8.1
• Mac OS X 10.7 +
• Available USB 3.0 Port
1
Overview
1. USB 3.0 Type A Ports (6 Downstream Ports)
2. USB 3.0 Mini-B Port (1 Upstream Port)
3. Power Port
1
6 5 4 3 2 1
1
2
3
2
Hardware Setup
1. Plug the AC adapter into any standard wall outlet and connect the plug to the power port.
2. Connect the Male USB Mini-B connector of the included USB 3.0 cable into the upstream port on the back of the GUH326.
3. Connect the Male USB Type-A plug of the included USB 3.0 cable into any available USB 3.0 port on your computer.
4. Your computer will automatically recognize the device and install the drivers if necessary.
1
3
2
3
SS
www.iogear.com
Operation - Charge & Sync
4
Compliance Information
Contact
1. Your GUH326 can simultaneously charge and sync multiple mobile devices, including iPad®.* Simply connect your smartphone and/or tablet using the cable supplied by the manufacturer to the GUH326.**
*Note: Simultaneous charge and sync compatible with Lightning connector equipped models only.
**Note: 4 smartphones/tablets is the maximum number of devices that can be charged simultaneously using the GUH326.
Troubleshooting
If your GUH326 USB port has suddenly stopped working:
Please remove the USB device, the power connection and USB connection to the computer for at least 30 seconds then reconnect.
In the event the port sees a short circuit, the GUH326 internal protection will disable the port until the USB device, the USB connection to the computer, and the power supply are all disconnected and then reconnected.
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
CE Compliance This device has been tested and found to comply with the following European Union directives: Electromagnetic Capability (2004/108/EC), Low Voltage (2006/95/EC) and R&TTED (1999/5/EC).
Caution!
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Limited Warranty
Warranty Information
This product carries a 3 Year Limited Warranty. For the terms and conditions of this warranty, please go to http://www.iogear.com/support/warranty
Register online at http://www.iogear.com/register
Important Product Information Product Model Serial Number
WE’RE HERE TO HELP YOU! NEED ASSISTANCE SETTING UP THIS PRODUCT?
Make sure you:
1. Visit www.iogear.com for more product information
2. Visit www.iogear.com/support for live help and product support
IOGEAR
iogear.custhelp.com support@iogear.com www.iogear.com
Loading...