ATEN VS-92A, VS-94A, VS-98A User Manual
User Manual
.
VS-92A / VS-94A /
VS-98A
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the
unit, and/or any of the devices connected to it.
This package contains:
M 1 VS-92A or VS-94A or VS-98A Video Splitter
M 1 DC 9V Power Adapter
M 1 User Manual
If anything is damaged or missing, contact your dealer.
© Copyright 2000-2005 ATEN International Co., Ltd.
Manual Part No. PAPE-1183-300G
Printed in Taiwan 07/2005
All brand names and trademarks are the registered property of their respective owners
- 5 -
Radio & TV Interference
WARNING!!! This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in
accordance with the instruction manual, may cause interference
to radio communications. This equipment has been tested and
found to comply with the limits for a Class A computing device
pursuant to Subpart J of Part 15 of the FCC Rules, which are
designed to provide reasonable protection against such
interference when operated in a commercial environment.
Operation of this equipment in a residential area is likely to
cause interference, in which case the user, at his own expense,
will be required to take whatever measures may be required to
correct the interference.
Limited Warranty
C
o
C
o
Function Specification
Cable Distance (Device to Monitor) 65 m (213’) max.
Signal Type VGA, SVGA, XGA, Multisync
Video Input Connectors 1 x HDB-15 Male
Operating Temperature 5 - 40
Storage Temperature -20 - 60
Humidity 0 - 80% RH, Non-condensing
Specifications
Housing Metal
IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY
FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE
OF THE PRODUCT, DISK, OR ITS DOCUMENTATION
EXCEED THE PRICE PAID FOR THE PRODUCT.
0.85 W 1.62W 3.42 W
Function VS-92A VS-94A VS-98A
DC 9VPower
Consumption (Max.)
The direct vendor makes no warranty or representation,
expressed, implied, or statutory with respect to the contents or
use of this documentation, and especially disclaims its quality,
performance, merchantability, or fitness for any particular
purpose. The direct vendor also reserves the right to revise or
update the device or documentation without obligation to notify
any individual or entity of such revisions, or update. For further
inquiries, please contact your direct vendor.
@ 75 Hz
1600 x 1200
200 x 74.5 x 42 mm
@ 60 Hz
1920 x 1440
248
Video Output Connectors
(HDB-15 Female)
Max. Resolution
400 g 600 g 700 g
250 MHz 250 MHz 200 MHz
Bandwidth (-3db)
Weight
42 mm
134 x 74.5 x
Dimensions (L x W x H)
Video Out Pin Assignments
No. Assignment No. Assignment
Ground
NC
9
10
Green video
Red video
2
1
ID1
ID0
12
11
ID2
Blue video
4
3
ID3
Vertical Sync
Horizontal Sync
15
14
13
Analog Ground
Analog Ground
Ground
7
6
5
- 4 -
Analog Ground
8
(Part No. 2L-2401) to connect the PC’s video port to the
Installation
Single Stage Installation
In a Single Stage installation no additional Video Splitters are
daisy chained down from the first unit. To set up a single stage
installation do the following:
1. Use a high density HDB-15 male/female video extender cable
Video In port of the Video Splitter.
2. Use high density HDB-15 male/female video extender cables
Video Splitter to the monitors.
(Part No. 2L-2401) to connect the Video Out ports of the
adapter cable into the Video Splitter’s Power Jack.
the PC.
3. Plug the power adapter into an AC source; plug the power
4. Power up the Video Splitter; power up the monitors; power up
Daisy Chaining
To provide video display for more monitors, additional Video
Splitters can be daisy chained. Use a high density HDB-15
male/female video extender cable (Part No. 2L-2401), to connect
any available Video Out port on the higher level Video Splitter to
the Video In port of the lower level Video Splitter.
You can chain as many Video Splitters as there are ports
8
7
VIDEO OUT
6
available, and all three models can be mixed on the same chain.
Theoretically, there is no limit to the number of splitters that can
be chained, but the quality will deteriorate as you chain further
4
3
2
- 3 -
and further away from the video signal.
- 2 -
Front View
1. Power LED Lights to indicate the unit is receiving power.
1
Rear View
DC 9V
5
VIDEO IN
1
1, all other monitors must be able to support the
highest resolution that the DDC monitor can provide.
VS-98A. A VS-92A and VS-94A will have two and
four Video Out Ports, respectively, instead of the
23
port plugs in here.
Out port of the higher stage unit plugs in here.
The cable from the Power Adapter plugs in here.
M If this is a First Stage unit, the cable from the PC’s video
M If this is a Daisy Chained unit, the cable from the Video
1. Power Jack
2. Video In Port
3. Video Out Ports
The cables to the monitors can plug in to any available port.
Note: 1. If you connect a DDC type monitor to Video Out Port
eight Video Out Ports shown in the diagram.
2. The Front and Rear Views in the diagrams are for a
- 1 -
Overview
These video splitters are boosting devices that duplicate the
video signal from any analog monitor source to two (VS-92A);
four (VS-94A); or eight (VS-98A) outputs. As such, they provide
fast, flexible, solutions for situations such as:
1, all other monitors must be able to support the
highest resolution that the DDC monitor can provide.
Mulitsync monitors. They are not suitable for CGA,
EGA, or MONO type monitors that use digital video
signals.
UL2919 rated extender cables.
2. These products are designed for VGA, SVGA, and
airline and train schedules, etc.), to the public
1) Broadcasting video information (news headlines, stock prices,
2) Monitoring harsh work environments from safe locations
3) Classroom or company training facilities
The VS-92A, VS-94A, and VS-98A go beyond being merely
duplicators, however, in that they also enhance the video signals
over long distance broadcasting of up to 65 m (213’).
In addition, units can be daisy chained to handle as many
monitors as the installation requires, making them excellent
solutions for public broadcast systems.
To achieve multiple high quality VGA, SVGA, or Multisync video
signals over long distances, these video splitters are your best
choice.
(VS-98A) Bandwidth
Features
M Ultra High 250 MHz (VS-92A / VS-94A) or 200 MHz
M Enhances Video Signal for Distances up to 65 m (213’)
M Supports DDC, DDC2, DDC2B (Port 1 Only)
M Daisy Chainable
M All Metal Housing
M Small Form Factor
and Training Facilities
M Ideal for Public Broadcasting; Remote Monitoring; Classroom
Note: 1. If you connect a DDC type monitor to Video Out Port
3. For the best video quality, we recommend using
Loading...