FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT
This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment. This equipment
ge nerates , uses, and can radia te radio f requenc y energy a nd, if not installed and
used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a
residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
Warning
Operation of this equipment in a residential environment could cause radio
interference.
Achtung
Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen
verursachen.
KCC Statement
ii
VS381B User Manual
Industry Canada Statement
This Class A digital apparatus complies with Canadian ICES-003.
HDMI Trademark Statement
The terms HDMI, HDMI High-Definition Multimedia Interface, and the
HDMI Logo are trademarks or registered trademarks of HDMI Licensing
Administrator, Inc.
RoHS
This product is RoHS compliant.
多溴聯苯
biphenyls
(PBB)
VS381B
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDE)
設備名稱
Equipmen t
Name
單元
電纜線
印刷電路部件
PCBA
塑膠/其他部件
Plastic / Other
parts
金屬部件
parts
備考1.〝超出
Note 1:“Exceeding 0.1 wt %” and “exceeding 0.01 wt %” indicate that the percentage content of the restricted
substanceexceeds the reference percentage value of presence condition.
備考2.〝○〞係指該項限用物質之百分比含量未超出百分比含量基準值。
Note 2:“○” indicates that the percentage cont ent of the restric te d su bstan c e does not ex ce ed the percentage of
reference value of presence.
備考3.〝-〞係指該項限用物質為排除項目。
Note 3:“−” indicates that the restricted substance corresponds to the exemption.
製造商:地址
最大操作環境溫度:最大額定電壓:
Unit
Cable
Metal
3埠True 4K HDMI
鉛
Lead
(Pb)
-○○○○○
-○○○○○
○○○○○○
-○○○○○
0.1 wt %
〞及〝超出
影音切換器型號(型式)
Restricted substances and its chemical symbols
汞
Cadmium
Mercury
(Hg)
0.01 wt %
Type designa-
tion (Type)
限用物質及其化學符號
六價鉻
鎘
Hexavalent
chromium
(Cd)
(Cr+6)
〞係指限用物質之百分比含量超出百分比含量基準值。
Polybrominated
宏正自動科技股份有限公司
:新北市汐止區大同路二段125號三樓
40ºC
DC 5V
iii
VS381B User Manual
About this Manual
This User Manual is provided to help you get the most from your VS381B
system. It covers all aspects of installation, configuration and operation. An
overview of the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the VS381B system. Its
purpose, features and benefits are presented, and its front and back panel
components are described.
Chapter 2, Hardware Setup, describes how to set up your VS381B
installation and all necessary steps are provided.
Chapter 3, Operation, explains the fundamental concepts involved in
operating the VS381B via the front panel pushbuttons, remote control, and auto
switching.
An Appendix, provides specifications and other technical information
regarding the VS381B.
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
>
iv
Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
>
Run means to
VS381B User Manual
Package Contents
1 VS381B 3-Port True 4K HDMI Switch
1 USB to DC power cable
1 IR remote control
1 IR receiver
1 user instructions*
Note:
Make sure that all the components are present and in good order. If
anything is missing or was damaged in shipping, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of
the devices connected to it.
v
VS381B User Manual
Product Information
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://eservice.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-400-810-0-810
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
1-949-428-1111
vi
VS381B User Manual
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.