This equipment has been tested and found to comply with the limits for a Class
A digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy, and if not installed and used in accordance with the
instruction manual, may cause interference to radio communications.
However, there is no guarantee that the interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna;
Increase the separation between the equipment and receiver;
Connect the equipment into an outlet on a circuit different from that
which the receiver is connected;
Consult the dealer/an experienced radio/television technician for help.
RoHS
This product is RoHS compliant.
SJ/T 11364-2006
The following contains information that relates to China.
ii
VS0102 / VS0104 / VS0108 User Manual
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://support.aten.com
North Americahttp://www.aten-usa.com/product_registration
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-10-5255-0110
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
United Kingdom44-8-4481-58923
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is.
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
Check to make sure that all the components are present and that nothing got
damaged in shipping. If you encounter a problem, contact your dealer.
Read this manual thoroughly and follow the installation and operation
procedures carefully to prevent any damage to the unit, and/or any of the
devices connected to it.
* Features may have been added to the VS0102 / VS0104 / VS0108 since this
manual was published. Please visit our website to download the most up-todate version.
This User Manual is provided to help you get the most from your system. It
covers all aspects of installation, configuration and operation. An overview of
the information found in the manual is provided below.
Chapter 1, Introduction, introduces you to the VS0102 / VS0104 / VS0108
system. Its purpose, features and benefits are presented, and its front and back
panel components are described.
Chapter 2, Hardware Setup, describes how to set up your installation. The
necessary steps to begin operation are provided.
Chapter 3, Operation, explains the fundamental concepts involved in
operating the VS0102 / VS0104 / VS0108.
An Appendix, provides specifications and other technical information
regarding the VS0102 / VS0104 / VS0108.
vii
VS0102 / VS0104 / VS0108 User Manual
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means to
press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
open the Start menu, and then select Run.
Indicates critical information.
Product Information
→ Run means to
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
viii
Chapter 1
Introduction
Overview
The ATEN VS0102 / VS0104 / VS0108 2/4/8-Port VGA Splitter with Audio
are VGA splitters that allow a single VGA video & audio signal to be
distributed to two, four, or eight output displays with independent stereo
control. The VS0102 and VS0104 support up to 450 MHz video bandwidth,
and the VS0108 supports up to 400 MHz video bandwidth , which provides
optimum video quality, supported by resolutions up to 1920x1440.
Furthermore, for complete systems integration, serial control is standard
through the VS0102 / VS0104 / VS0108’s built-in RS-232 ports, which allow
the splitter to be controlled through a high-end controller or PC.
The VS0102 / VS0104 / VS0108 is perfect for conference rooms, training
facility & multi-display broadcasting, with cascadable support up to three
levels allowing a single video signal to be sent across up to 8/64/512 video
displays while sustaining the highest quality possible.
1
VS0102 / VS0104 / VS0108 User Manual
Features
One video input to 2/4/8 video outputs
Superior video quality – up to 1920 x 1440 @ 60Hz
Supports up to 450 MHz bandwidth (VS0102/VS0104), and 400 MHz
bandwidth (VS0108) for high performance video
Long distance transmission – up to 65m
Supports VGA, SVGA, UXGA, WUXGA, and multisync
EDID Expert -- selects the optimum EDID settings for smooth power-up
and highest quality display
Expandable – provides up to 8/64/512 video displays
RS-232 chain control – use RS-232 commands to control cascaded devices
via VGA cable*
Supports stereo audio
Plug-and-play – no software installation required
Note: The VS0102 / VS0104 / VS0108 AP and GUI operational instructions
can be downloaded from the ATEN website (www.aten.com).
2
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.