ATEN VE2812AUST, VE2812AEUT User Manual

VE2812AUST / VE2812AEUT

HDMI & VGA HDBaseT Transmitter

with US / EU Wall Plate

User Manual

www.aten.com

VE2812AUST / VE2812AEUT User Manual

EMC Information

FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE STATEMENT: This equipment has been tested and found to comply with the

limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.

Warning: Operation of this equipment in a residential environment could cause radio interference.

This device complies with Part 15 of the FCC Rules. O peration is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Suggestion: Shielded twisted pair (STP) cables must be used with the unit to ensure compliance with FCC & CE standards.

Achtung: Der Gebrauch dieses Geräts in Wohnumgebung kann Funkstörungen verursachen.

KCC Statement

RoHS

This product is RoHS compliant.

ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All other brand names and trademarks are the registered property of their respective owners. The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc.

Manual Date: 2020-12-16

VE2812AUST / VE2812AEUT User Manual

User Information

Online Registration

Be sure to register your product at our online support center:

International http://eservice.aten.com

Telephone Support

For telephone support, call this number:

International 886-2-8692-6959

China 86-400-810-0-810

Japan 81-3-5615-5811

Korea 82-2-467-6789

North America 1-888-999-ATEN ext 4988

1- 949-42 8-1111

User Notice

All information, documentation, and specifications contained in this manual are

subject to change without prior notification by the manufacturer. The

manufacturer makes no representations or warranties, either expressed or

implied, with respect to the contents hereof and specifically disclaims any

warranties as to merchantability or fitness for any particular purpose. Any of the

manufacturer's software described in this manual is sold or licensed as is.

Should the programs prove defective following their purchase, the buyer (and

not the manufacturer, its distributor, or its dealer), assumes the entire cost of all

necessary servicing, repair and any incidental or consequential damages

resulting from any defect in the software.

The manufacturer of this system is not responsible for any radio and/or TV

interference caused by unauthorized modifications to this device. It is the

responsibility of the user to correct such interference.

The manufacturer is not responsible for any damage incurred in the operation

of this system if the correct operational voltage setting was not selected prior to

operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS CORRECT

BEFORE USE.

iii

VE2812AUST / VE2812AEUT User Manual

Package Contents

1 VE2812AUST / VE2812AEUT HDMI & VGA HDBaseT Transmitter

1 3-Pin RS-232 Terminal Block

1 2-Pin Power Terminal Block

1 Mounting Kit (VE2812AEUT only)

1 Faceplate (VE2812AUST only)

1 Power Adapter

1 User Instructions*

Note: Make sure that all of the components are present and in good

order. If anything is missing or was damaged in shipping, contact your dealer.

VE2812AUST / VE2812AEUT User Manual

EMC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii

User Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Online Registration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Telephone Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

User Notice . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .iii

Package Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . iv

About this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vii

Conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .viii

Product Information. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ix

1. Introduction

Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Planning the Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Considerations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3

Compatible ATEN Video Extenders . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Top View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4

Side View 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Side View 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

LED Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6

2. Hardware Setup

Mounting the VE2812AUST / VE2812AEUT Unit . . . . . . . . . . . . . . . . . . . . 7

Site Preparation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

Drawing Screw Site . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7

VE2812AUST Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8

VE2812AEUT Wall Mount . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Optional Mounting Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10

Connecting the VE2812AUST / VE2812AEUT Unit . . . . . . . . . . . . . . . . .13

Terminal Block Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Power Supply Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

RS-232 Channel Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15

3. Operation

Selecting the Input Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Input Modes. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Input Selection Pushbutton . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18

RS-232 Serial Transmission . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Bypass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20

Command . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

VE2812AUST / VE2812AEUT User Manual

Long Reach Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21

Appendix

Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

General . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Technical Support . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

International . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

North America . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Supported VGA Resolutions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35

Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Template Printing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

VE2812AUST / VE2812AEUT User Manual

About this Manual

This user manual is provided to help you get the most from the VE2812AUST /

VE2812AEUT unit. It covers all aspects of installation, configuration, and

operation. An overview of the information found in the manual is provided below.

Chapter 1, Introduction introduces you to the HDMI & VGA HDBaseT

Transmitter. Its purpose, features, installation considerations, and panel

components are presented and described.

Chapter 2, Hardware Setup describes the steps that are necessary to quickly

and safely set up your installation.

Chapter 3, Operation explains the Long Reach Mode and limitations, and how

to set up the input detection mode using the a pushbutton and RS-232

commands.

Appendix provides a list of safety instructions and precautions, contact

information for ATEN technical support, product specifications, and other

technical information.

Note:



Read this manual thoroughly and follow the installation and operation

procedures carefully to prevent any damage to the unit or any connected

devices.



ATEN regularly updates its product documentation for new features and

fixes. For an up-to-date VE2812AUST / VE2812AEUT documentation, visit

......................... http://www.aten.com/global/en/

vii

VE2812AUST / VE2812AEUT User Manual

Conventions

This manual uses the following conventions:

Monospaced Indicates text that you should key in.

[ ] Indicates keys you should press. For example, [Enter] means to

press the Enter key. If keys need to be chorded, they appear together in the same bracket with a plus sign between them: [Ctrl+Alt].

1. Numbered lists represent procedures with sequential steps.

♦ Bullet lists provide information, but do not involve sequential steps.

→ Indicates selecting the option (on a menu or dialog box, for

example), that comes next. For example, Start open the Start menu, and then select Run.

Indicates critical information.

→

Run means to

viii

VE2812AUST / VE2812AEUT User Manual

Product Information

For information about all ATEN products and how they can help you connect

without limits, visit ATEN on the Web or contact an ATEN Authorized Reseller.

Visit ATEN on the Web for a list of locations and telephone numbers:

International http://www.aten.com

North America http://www.aten-usa.com

VE2812AUST / VE2812AEUT User Manual

This Page Intentionally Left Blank

Chapter 1

Introduction

Overview

ATEN VE2812AUST / VE2812AEUT is a video transmitter that can send VGA (with audio) and HDMI signals up to 100 m over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable. Featuring built-in PoH (Power over HDBaseT) function, the VE2812AUST / VE2812AEUT receives power supply from the HDBaseT output port on the connected device. This eliminates the need for a power adapter and reduces the hassle of power line deployment behind the wall.

The VE2812AUST / VE2812AEUT guarantees reliable transmission of HDMI/ VGA signals. For HDMI signal transmission, it supports 3D, Deep Color, and embedded HD lossless audio formats. In addition, the VE2812AUST / VE2812AEUT supports Long Reach Mode, which allows the device to transmit signals up to 150 m, 1080p, over a Cat 5e/6 cable.

For utility flexibility, the VE2812AUST / VE2812AEUT can serve as a video switch by connecting to two sources and distribute them to an identical output. The compact wall plate design does away with bulky cables, allowing a neat and convenient installation in the wall or the table. The VE2812AUST / VE2812AEUT is designed for use in meeting rooms or digital education environments where high video quality is required.

VE2812AUST / VE2812AEUT User Manual

Features



Extends HDMI or VGA signals over a single Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable



HDMI (3D, Deep Color, 4K); HDCP 2.2 compliant



Superior video quality



HDMI 4K up to 100 m via a Cat 5e/6/6a cable or ATEN 2L-2910 Cat 6 cable



VGA 1600 x 1200 / 1920 x 1200 up to 100 m via a Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable



Supports HDBaseT Long Reach Mode – extends signals up to 150 m, 1080p via a single Cat 5e/6 cable



Built-in PoH (Power over HDBaseT) function – the VE2812AUST / VE2812AEUT receives power supply from the HDBaseT output port on the connected device



Supports Auto Switch – the VE2812AUST / VE2812AEUT automatically switches to a newly plugged-in source



Functions as a switch and a converter



A switch: Connects to two source devices (HDMI or VGA)



A converter: Applies to receivers with different interfaces (DVI, DisplayPort, or HDMI)



Supports RS-232 channel transmission and source switch control



Compatible receivers – VE2812R, VE1812R, VE812R, VE814AR, VE811R, VE801R, VE802R, VE601R, VE901R, or future ATEN HDBaseT Receivers



Supports IR signal frequencies from 30 kHz to 60 kHz



Plug-and-play with no required software



LED indication of sources and device status

Chapter 1. Introduction

Planning the Installation

Requirements

Prepare the following before installing the VE2812AUST / VE2812AEUT unit:



1 HDMI and/or VGA source device



1 Cat 5e/6/6a or ATEN 2L-2910 Cat 6 cable

Considerations



To ensure video quality, ATEN recommends using a Cat 5e/6/6a cable.

Note: ATEN recommends using the ATEN 2L-2910 Cat 6 cable for best

results.



The maximum transmission distance varies at different parts of the transmission:

Connection Interface Distance

Computer to the

VE2812AUST / VE2812AEUT

The VE2812AUST /

VE2812AEUT to a compatible

ATEN Video Extender

A compatible ATEN Video

Extender to the display

HDMI / VGA 1.8 m

Cat 5e/6/6a 100 m / 150 m (up to 1080p in Long

Reach Mode)

HDMI

(example)

5 m

Note: The maximum transmission distance for 4K resolution using a Cat 5e

cable is 70 m.

Compatible ATEN Video Extenders

The VE2812AUST / VE2812AEUT is compatible with a wide range of ATEN

HDBaseT video extenders. Visit our official web site for more details.

VE2812AUST / VE2812AEUT User Manual

VE2812AEUT

VE2812AUST

Components

Top View

No. Component Description

1 IR Port Connects to an IR transmitter/receiver.

2 HDMI Input Port Connects to the HDMI Out port on the source device.

3 Audio Input Port Connects to the Audio Out port on the source device.

4 VGA Input Port Connects to the VGA Out port on the source device.

5 Source Switch

Pushbutton

Press to switch among the Auto Switch, HDMI, and VGA input mode. The input mode status is indicated by the three LEDs to the right of this pushbutton. For details, see LED Display, page 6.

Chapter 1. Introduction

VE2812AUST

VE2812AEUT

VE2812AUST

VE2812AEUT

Side View 1

No. Component Description

1 Firmware Upgrade Switch This port is reserved for ATEN Technical Support. If

2 HDBaseT Long Reach

Mode Switch

you would like to do a firmware upgrade yourself, please contact your dealer.

Put the switch to ON to enable the Long Reach Mode. For more details on Long Reach Mode, see Long Reach Mode, page 21.

Side View 2

No. Component Description

3 Power Jack Connects to the Power Adapter.

RS-232

Serial

5 HDBaseT Output Connects to the HDBaseT Input port on a compatible

Port

Connects to an RS-232 main controller, such as a PC or Control system.

ATEN video receiver via an RJ-45 cable.

+ 32 hidden pages

ATEN VE2812AUST, VE2812AEUT User Manual

EMC Information

User Information

Online Registration

Telephone Support

User Notice

Package Contents

Table of Contents

About this Manual

Conventions

Product Information

Overview

Features

Planning the Installation

Requirements

Considerations

Compatible ATEN Video Extenders

Components

Top View

Side View 1

Side View 2