ATEN UEH4002, UEH4002L, UEH4002R User Manual
UEH4002
Cat 5 USB 2.0 Extender
User Guide
Thank you for purchasing the UEH4002.
Please read this guide thoroughly.
FCC Radio Frequency Interference Statement Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and (2) this device must accept any interference received
including interference that may cause undesired operation.
CE Statement
We declare under our sole responsibility that the UEH4002, to which this declaration relates,
is in conformity with European Standard EMC EN-55022:2006+A1:2007 Class B, EN 61000-3-2:2006,
EN 61000-3-3:2003, and EN 55024:1998+A2:2003.
IC Statement
This Class B digital apparatus complies with Canadian ICES-003.
ROHS
This product is ROHS compliant.
©2012 ATEN International Co., Ltd.
ATEN and the ATEN logo are registered trademarks of ATEN International Co., Ltd.
All rights reserved.
Contents
Introduction ................................................................................................... 3
Ranger Product Contents ............................................................................................................
3
Requirements
About the Ranger
................................................................................................................................
.........................................................................................................................
Installation guide .......................................................................................... 6
Installing the Local unit ..............................................................................................................
Installing the Remote unit
Connecting the Local unit to the Remote unit
Checking the Installation
Connecting a USB Device
...........................................................................................................
.........................................................................
.............................................................................................................
............................................................................................................
Troubleshooting ............................................................................................ 8
Specifications ................................................................................................. 11
Limited Hardware Warranty ......................................................................... 12
Hardware Remedies ...................................................................................... 12
Limitation of Liability .................................................................................... 12
Obtaining Warranty Service ......................................................................... 13
3
3
6
6
7
7
8
Contacting Technical Support ...................................................................... 13
Technical Glossary ......................................................................................... 14
Introduction
The instructions in this guide assume a general knowledge of computer installation procedures, familiarity
with cabling requirements, and some understanding of USB devices.
NOTE: Notes provide additional information that could be useful.
note
CAUTION: Cautions provide important information about an operational requirement.
UEH4002 Product Contents
Your UEH4002 is packaged with:
•
UEH4002L USB 2.0 Extender (Local unit)
UEH4002R USB 2.0 Extender (Remote unit)
•
•
AC Power Adapter
• USB 2.0 Cable (6 ft)
• Quick Start Guide and Warranty Information
note
the required 500mA current. Please contact an ATEN Sales representative for further details (See Page 13).
An additional AC power adapter may be purchased for the Local unit in the event that your USB port can not supply
Requirements
To complete the installation, you will also require the following items that are not included with the product:
• USB
• USB 1.1 or 2.0 compatible device
• Cat 5 Unshielded Twisted Pair (UTP) cable with two RJ45 connectors (if using surface cabling),
OR, Cat 5 cabling with
(if using premise cabling)
All references to Cat 5 cable in this document represent the minimum requirement. Category 6 or better or STP cable
note
may be substituted.
1.1 or 2.0 compatible computer (host computer) with a USB compliant operating system
two information outlets and two Cat 5 patch cords with RJ45 connectors
About the UEH4002
The UEH4002 incorporates technology that enables users to extend beyond the standard 5m cable limit
for USB peripheral devices. With the UEH4002, USB devices can be located up to 100 meters from
the computer.
The UEH4002 is composed of two individual units: the Local unit and the Remote unit.
3
The UEH4002L
The Local unit connects to the computer using a standard USB cable. Power for this unit is provided by the
USB on the host computer.
Front View
5
6 7
Rear View
ITEM TYPE DESCRIPTION
1 Power LED (Blue)
2 Link LED (Green)
3 Host LED (Green)
LED turns on when power is supplied. Off when no power is
supplied.
Indicates a valid USB link is established between the Local
and Remote units over the Cat 5 cabling.
Indicates that the UEH4002 system is properly enumerated on
the host PC.
1
3
2
8
4
Indicates activity when data transmission is active between Local
4 Activity LED (Amber)
and Remote. LED blinks intermittently with or without a USB device
connected. When the Local and Remote are in suspend mode, the
LED is off.
5 Earth Ground
Optional earth ground connection to housing of unit. Accepts an
M2 type screw..
Not required in normal operation. An optional 5V power supply
6 Power Port (optional)
can be connected to the Local unit to provide power if the USB port
on the host PC is not capable of delivering 500mA to the unit.
7 USB Type B connector Used to connect the Local unit to the host computer.
8 Link Port (RJ45) Accepts RJ45 connector for Cat 5 cabling (or better)
4
Loading...