FEDERAL COMMUNICATIONS COMMISSION INTERFERENCE
STATEMENT: This equipment has been tested and found to comply with the
limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy and, if
not installed and used in accordance with the instruction manual, may cause
harmful interference to radio communications. Operation of this equipment in
a residential area is likely to cause harmful interference in which case the user
will be required to correct the interference at his own expense.
The device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
FCC Caution: Any changes or modifications not expressly approved by the
party responsible for compliance could void the user's authority to operate this
equipment.
Warning: Operation of this equipment in a residential environment could
cause radio interference.
KCC Statement need check
RoHS
This product is RoHS compliant.
ii
KA7171 / KA7171AK User Manuall
User Information
Online Registration
Be sure to register your product at our online support center:
Internationalhttp://eservice.aten.com
Telephone Support
For telephone support, call this number:
International886-2-8692-6959
China86-400-810-0-810
Japan81-3-5615-5811
Korea82-2-467-6789
North America1-888-999-ATEN ext 4988
1-949-428-1111
User Notice
All information, documentation, and specifications contained in this manual
are subject to change without prior notification by the manufacturer. The
manufacturer makes no representations or warranties, either expressed or
implied, with respect to the contents hereof and specifically disclaims any
warranties as to merchantability or fitness for any particular purpose. Any of
the manufacturer's software described in this manual is sold or licensed as is .
Should the programs prove defective following their purchase, the buyer (and
not the manufacturer, its distributor, or its dealer), assumes the entire cost of all
necessary servicing, repair and any incidental or consequential damages
resulting from any defect in the software.
The manufacturer of this system is not responsible for any radio and/or TV
interference caused by unauthorized modifications to this device. It is the
responsibility of the user to correct such interference.
The manufacturer is not responsible for any damage incurred in the operation
of this system if the correct operational voltage setting was not selected prior
to operation. PLEASE VERIFY THAT THE VOLTAGE SETTING IS
CORRECT BEFORE USE.
Altusen and the ATEN logo are registered trademarks of ATEN International Co., Ltd. All rights reserved. All
other brand names and trademarks are the registered property of their respective owners.
Package Contents
KA7171
1 KA7171 USB-PS/2 KVM Adapter Module
1 Power Adapter
1 Custom KVM Cable (VGA, USB, PS/2; 1.2m/4ft)
1 Foot Pad Set (4 pcs.)
1 User Instructions*
KA7171AK
1 KA7171AK USB-PS/2 KVM Adapter Module
1 Power Adapter
1 Custom KVM Cable (VGA, USB, PS/2; 1.2m/4ft)
1 Foot Pad Set (4 pcs.)
1 User Instructions*
1 2XRT-0015G KVM over IP Access Control Box
1 User Instructions* (For 2XRT-0015G)
* Features may have been added to the KVM over IP console station since the
user instructions were created. Please visit our website to download the most
up-to-date version of the user manual.
Note: Check to make sure that all of the components are present and in good
order. If anything is missing, or was damaged in shipping, contact your dealer.
This User Manual is provided to help you get the most from your KVM
over IP Console Station. It covers all aspects of installation,
configuration and operation. An overview of the information found in the
manual is provided below.
Chapter 1, Introduction, introduces you to the KVM over IP Console
Station. Its purpose, features and benefits are presented, and its front
and back panel components are described.
Chapter 2, Hardware Setup, provides step-by-step instructions for
setting up your installation, and explains some basic operation
procedures.
Chapter 3, Operation, explains the fundamental concepts involved in
operating the product, and provides a complete description of how to
operate the product.
An Appendix, at the end of the manual provides technical and
troubleshooting information.
vii
KA7171 / KA7171AK User Manual
Conventions
This manual uses the following conventions:
MonospacedIndicates text that you should key in.
[ ]Indicates keys you should press. For example, [Enter] means
to press the Enter key. If keys need to be chorded, they appear
together in the same bracket with a plus sign between them:
[Ctrl+Alt].
1.Numbered lists represent procedures with sequential steps.
♦Bullet lists provide information, but do not involve sequential
steps.
→Indicates selecting the option (on a menu or dialog box, for
example), that comes next. For example, Start
to open the Start menu, and then select Run.
Indicates critical information.
Product Information
→
Run means
For information about all ATEN products and how they can help you connect
without limits, visit ATEN on the Web or contact an ATEN Authorized
Reseller. Visit ATEN on the Web for a list of locations and telephone numbers:
Internationalhttp://www.aten.com
North Americahttp://www.aten-usa.com
viii
Chapter 1. Introduction
Chapter 1
Introduction
Overview
For smooth operation and added convenience, ATEN’s KA7171 /
KA7171AK USB-PS/2 KVM Adapter Module is designed to provide a
full console connection locally in a KVM over IP Switch or Matrix KVM
installation.
The KA7171 / KA7171AK allows a PS/2 or USB server to be connected
to the switch via Cat 5e/6 cable and provides an extra console via USB
keyboard, USB mouse, and monitor to use for extended local
operations.
In addition, the Privileged Console Control function prevents remote
users from operating the device when a local administrator requires full
control of the server - reducing conflicts and unwanted operations.
KA7171AK is an upgraded version of KA7171 that is designed to work
with our KVM over IP Access Control Box. The 2XRT-0015G KVM over
IP Access Control Box allows users to enable or disable remote over
IP control privilege by simply pressing a control button.
It’s fast and easy to set up the 2XRT-0015G. Simply plug the 2XRT0015G’s cables to the KA7171AK. There is no need to install software
or configure devices - just plug and play.
In addition, the cable length of the 2XRT-0015G reaches 5 meters,
enabling connection to the transmitter over longer distances for more
flexible installation.
1
Loading...
+ 21 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.