Unpacking
The IC-485SN package contains:
-One IC-485SN Converter
-One User Manual
Check to see if the product has been damaged in shipping. If you encounter a problem , contact your dealer right away.
SJ/T 11364-2006
The following contains information that relates to China
C Copyright 1998 ATEN R International Co., Ltd.
Manual Part No. PAPE-1134-100
Printed in Taiwan 01/1999
All brand names and trademarks are the registered property of their respective owners
Table of Contents
Online Registration ................................................. |
1 |
Overview ............................................................... |
2 |
Features ............................................................... |
2 |
Switch Configuration ............................................... |
3 |
Operating Modes .................................................... |
4 |
Point-to-Point ......................... .......................... |
4 |
Multidrop........................................................... |
5 |
Simplex ............................................................. |
8 |
Installation .............................................................. |
9 |
Appendix................................................................ |
10 |
Terminal Block Pin Assignments ........................ |
10 |
DCE/DTE Connection Description ..................... |
10 |
SW2 Pin Assignment Schematics ...................... |
10 |
Troubleshooting ................................................ |
11 |
Specifications ................................................... |
12 |
Radio & TV Interference .................................... |
13 |
Online Registration
You can register your product at our online support center:
International - http://support.aten.com
North America - http://www.aten-usa.com/ product_registration
Online Support
Online technical support is available to ATEN customers through our support center:
International - http://support.aten.com
North America - http://www.aten-usa.com/support.
Troubleshooting, Documentation (including online manuals),and Software Updates (firmware and drivers) are available at the ATEN website:
International - http://www.aten.com
North America - htttp://www.aten-usa.com
1
Overview
The IC-485SN is a bidirectional converter for RS-232 and RS-485/RS-422 interfaces that provides Point to Point, Multidrop, and Simplex operations. A figure showing the names and locations of its features is given below:
SW 1
RS-232 DB-25 Female Connecter
SW 2
Terminal Block
Spare
Power Jack
RJ-11
The operating mode, contention control and RS-232C assignments are all configured with two slide switches: SW1 and SW2 (details are given in the Switch Configuration section, below).
Features
Data Transmission Controlled by the RTS Signal
DCE/DTE Selectable
Point to Point/Multidrop, and Simplex/Duplex Operating Modes
External Power Not Required - Power Supplied by The RS-232 Interface
Compact Size
2